Reference R-5587: Beta Roller Squeezers, Working Width 3400 Mm, Year 2004
Brand: Beta
Machinery: Roller squeezers
Type: Fmc-3
Width: 3600 mm
Working width: 3400 mm
Equipressure foulard
Max pneumatic pressure: 26,000 kg
Frame in painted steel sheet
Upper and lower cylinders: 370 mm diameter
With internal compensation axes
Covered in rubber 90 shore hardness
Central cylinder diameter: 230 mm, chrome and satin
Parallel cylinder grinding
1 return cylinder, chrome steel and ground on the fore front
Motor power of 57 kw for the command, using v-belts, the central cylinder
2 handguards stainless steel
Safety: with 2 security guards, one on entry one on output
Consisting of sliding doors manually guides. Each door equipped with its own switch with electromagnetic lock the door
The safety circuit and fully redundant and includes two security modules in dual channel with feedback control
A sensor shaft is stopped and two contactors for motors
On the structure of screens are also fitted with two emergency buttons
Cylinder 300 mm chrome-plated steel and ground
Installed on load cells for the adjustment of the shot up to a maximum of 4,000 kg mounted on top of the foulard
Cylinders: 3
Year: 2004
Reference L-4846: Automatic Slitting Opener With Squeezing, Width 1800 Mm - New
With squeezing, width 1800 mm
Model: 1800-el
Slitting device 1800 mm wide
Speed: 5 to 80 meters per minute
Power: 380 volts, 50 hz, 3 phase (or as per customer’s requirements)
Compressed air: 7 kg/cm³
Turntable and relaxed j-box: turntable ss41 steel made with stainless steel cover, rotation disc diameter: 2000 mm. It is driven by hydraulic motor and this motor turning is controlled by detwisting head, also it can be controlled by manuals
Relax device: made of stainless steel
Photocell detector: if the rope type knitted fabrics is twisted or tangled, the detector will flash on and stop the machine
Press roll and squeezer: 2 rubber rollers and one press roller to remove the water, feed the fabric, it controlled by inverter
Relaxed trough: this trough is reduce the tension of feed fabrics, it accumulate the fabrics and control the feed fabrics speed
Safety device: when there are no fabrics in the trough, the whole system including de-twister will immediately stop
Detwister: body frame made from stainless steel
Detwisting transmission: the rope type twisting power come from 3 wheels and it controlled by one 1/4 hp motor, with inverter controlled
Photocell detector: circular detector all protected by a safety cover
Driven: by one 2 hp motor with gear reducer, speed control by inverter
Beater: body frame made by stainless steel tube and bearing
Electric motor: each beater is driven by 1 hp motor
Centering device: body frame made by ss41 steel
Scroll roller: 2 pcs of stainless steel scroll roller driven by 2 sets of 1 hp induction motor and center scroll roll can be adjusted by tandem
Detector and calibrator: by infrared detector and calibrated by air cylinder
Fabric driven roller and plaiter: driven roller and transmission the fabric driven rollers outside dia. 220 mm are covered by rubber and driven by one 2 hp inverter motor
Plaiter: controlled by one 2 hp inverter motor and the speed calibrated by potentiometer
Body frame: whole body frame is made of stainless steel
Stair and high stand platform: made by stainless steel plate and with safety fence
Control cabinet: control box control by push button, driver system by inverter brand “danfoss”, electric components are brand “fuji”
Will be shipped in one 20 foot container
Reference R-5437: Beta Roller Squeezers, Working Width 3400 Mm, Year 2004
Brand: Beta
Machinery: Roller squeezers (finishing)
Type: Fmc-3
Width: 3600 mm
Working width: 3400 mm
Equipressure foulard - max pneumatic pressure 26,000 kg - frame in painted steel sheet - upper and lower cylinders 370 mm diameter
With internal compensation axes
Covered in rubber 90 shore hardness
Central cylinder diam. 230 mm, chrome and satin
Parallel cylinder grinding
1 return cylinder, chrome steel and ground on the fore front
Motor power of 57 kw for the command, using v-belts, the central cylinder
2 handguards stainless steel
Safety: with 2 security guards, one on entry one on output
Consisting of sliding doors manually guides
Each door equipped with its own switch with electromagnetic lock the door. The safety circuit and fully redundant and includes two security modules in dual channel with feedback control
A sensor shaft is stopped and two contactors for motors. On the structure of screens are also fitted with two emergency buttons
Cylinder 300 mm chrome-plated steel and ground. Installed on load cells for the adjustment of the shot up to a maximum of 4000 kg mounted on top of the foulard
