Fung Chang, DR2-170-F / SE-120-N2, 2020, 2 Raschel Knitting Lines for Plastic Bags, 170 Inches Width, 6G Gauge

Description

  1. Overview
    1. Consisting of 2 raschel knitting lines
  2. Item 001: Raschel Knitting Line With Auto-Cutting Device
    1. Complete line for onion / potatoes / fire log nets, year 2020
    2. Model: DR2-170-F
    3. Width of needle bar: 170 inches
    4. Gauges of needle bed: 6G per inch
    5. Number of guide bars: 9 bars (4 ground bars + 5 function bars)
    6. Number of needle bar: 2 individual bars with latch needle
    7. Guide and latch needle: 2G per inch
    8. Drive of knitting element: eccentric shaft driving
    9. Yarn supply: slitting and extension machine synchronized with knitting machine
    10. Yarn feed and tension: 4 sets of 3 rollers unit controlled by motor with inverter
    11. Pattern drive: pattern drum with chain link
    12. Main motor: TECO (Taiwan), 10 HP
    13. Inverter: Delta (Taiwan)
    14. Inching drive: controlled by main motor with inverter
    15. Fabric take-up drive: 3-rollers driven by gear box
    16. Auto cutting device: heat cutting device, 3 kW; driven by 0.5 HP motor with PLC control
    17. Electric counter with panel control box
  3. Item 001: Operation Condition
    1. Room temperature: not over 40°C, difference is less than +/- 10°C
    2. Air humidity: around 65%
    3. Floor loading: minimum 1000 kg/m², better over 1500 kg/m²
  4. Item 002: Raschel Knitting Line With Auto-Cutting Device
    1. Complete line for onion / potatoes / fire log nets, year 2020
    2. Model: SE-120-N2
    3. Available film width: 1180 mm
    4. Available roll diameter: 1000 mm
    5. Take-off roller: 3 pcs/unit roller x 16 units driven by motors with inverter
    6. Blade thickness: 0.25 mm
    7. Washer: 5 mm for main use, 3.5 mm for spare
    8. Electric control synchronized with knitting machine
  5. Item 002: Operation Condition
    1. Room temperature: not over 40°C, difference is less than +/- 10°C
    2. Air humidity: around 65%
    3. Floor loading: minimum 500 kg/m², better over 800 kg/m²
  6. Item 002: HDPE Film Requirement
    1. Blow-up ratio: 1.2 ~ 1.5
    2. Film width (max.): 560 mm or 1180 mm
    3. Film thickness: 60 micron ~ 80 micron (0.06 mm ~ 0.080 mm)
    4. Film condition: good quality film without wrinkle or fold inside
    5. Iron pipe: I.D. 84 mm to 89 mm