Description Overview Baby diaper machine md-e modo Baby diaper machine fcm modo Model: md-e modo converting machinery ab Year: 1987 Practical output: 250 diapers/min Production sizes: newborn, mini, midi, maxi, junior Pulp Fiberization Steel frame for 6 rolls Sensor and alarm light for end rolls Kamas hammer mitt hc 60 with 110 kw ac motor Forming Unit 2 piece 2d drum forming system in the same chamber First drum for continuous pad, second drum for intermittent pad Balancing brushes for each drum (2 piece) Dust Circuit All line forming and dust collected in cyclones, small particles collected in dust bags Bigger fluff particles circuit coming back after the hammer mill and feed back to product System Fans Fluff transport 18.5 kw Forming vacuum fan no. 1 22.0 kw Forming vacuum fan no. 2 15.0 kw Core remove fan Line cleaning fan 18.0 kw Dust circuit fan no. 1 11.0 kw Dust circuit fan no. 2 11.0 kw Frontal fan Waistband vacuum Middle layer vacuum Tape vacuum All duct work associated with these fans Sap Feeder Frequency controlled volumetric screw, feed follows line speed steel hopper for 1.000 kg big bags Sap feeding from hopper to unit with vacuum by fan Pneumatic sap feeding pipes (stainless steel) Adjustable sap feeding head in drum chamber Core Handling Pneumatic, adjustable, pad pre-compression unit (by upper and lower belt) Tissue glued by spiral spray-gun, tissue taken up to pad upper belt for tissue contact to fluff pad Pad cutting unit, rotary cutter, straight knife Tissue Rollstand 2 tissue rolls holder, unwinded by friction brakes (diameter 0.9 m) Manual flying change Poly And Frontal Position 90 degree outside the line Mechanically driven roll unwinder, 2 roll stand unwinded by belts Frontal cut and place unit (frontal roll diameter 1.2 m) 90 degree turning device, turn poly inline 2 adjustment to drive frontal outside or inside the diaper Poly gluing by slot coating head Leg Elastic Leg elastic (3+3) Ac-controlled unwinder for 8 rolls 2 glue coating guns for intermittent lycra glue Nonwoven Automatic flying change roll-stand in line Slot coating head with stripes Waistband Applicator 2 piece roll holder (roll can be manually changed on the fixing rolls) To fix non-woven just before line married point Adjustable can place the band on the front or back Marriage Point Poly incoming under production line vertical level Pad taken up to poly Nonwoven fixed up to poly and pad (leg cuff, waistband and middle layer) Rubber coated pneumatic pre-compression unit Fixing Tape Tape roll-stands Mechanically driven tape feeder Chilled hard metal knives with a vacuum Free rotation upper fixing rolls Tape folding plates Rotating fixing rolls for second laminate Tape detector sensors with waste function Longitudinal Folding Unit Width adjustable folding plates and bar Final Cutting Unit Belt pulling and compressing unit before final cut Rotary die cutter Cross Folding Unit Chain guided spikes fold diaper in cross-direction Product outlet between belts vertical direction, folds coming first Transmission Main motor dc controlled 2 piece main shaft (line speed - cutters) Line equipped by tandler gear boxes 5 size's belt gear for forming unit 1 piece adjustable variarot (a3) for pad speed control (manual length control) Several adjustable variators for line speed control (manual length control) Glue Equipment Hot melt tank (5 units) Glue timer, all intermittent glues controlled by basfer 8 channel unit (1 piece) Control Equipment with plc Middle layer roll stand Nonwoven roll stand Leg cuff equipment and roll stand Line consists of 2 piece plc's Waist control Main plc Spare Parts Any and all spare parts associated with the md-e line
