NovaStar, DG359, Washing Line for Cotton Fabric, 2000mm Working Width, 15-80 m/min (New)

Name: NovaStar, DG359, Washing Line for Cotton Fabric, 2000mm Working Width, 15-80 m/min
Brand: NovaStar
SKU: K-1311

‹ Go Back Next Product ›

Description

Main Technique Data
1. Type: open width coloration, soaping, washing
2. Operation method: left-hand and right-hand (both types are available)
3. Machine working width: 2000 mm
4. Feeding roll width: 2030 mm
5. Line speed: 15 to 80 m/min
6. Max. capacity of steamer: 60 meters
7. Air pressure: 0.4 MPa
8. Water pressure: 0.3 MPa
9. Compressing air pressure: 0.6 MPa
10. Control: AC motor inverter
Consists Of
1. Unwinder and Fabric Feeder
  1. Roll of unwinder: diameter 200 mm covered with rubber shore 80°C
  2. With air-tank
2. Nip-Roll Device (Pad Foulard)
  1. Type: two-roll horizontal
  2. Diameter of roll: 190 mm coated with rubber (shore 70±3°C)
  3. Power: 505 kW
  4. AC inverter
  5. With double-layer jacket tank with water cooling
  6. Lift control
  7. Diameter of air tank: 125 mm
3. Wash Box
  1. Made of #304 steel of 3 mm thickness
  2. Diameter of guide roll: 150 mm
  3. Material of roll: OCR18NI9TI
  4. Distance between upper and bottom rolls: 1000 mm
  5. (5) upper rolls and (6) bottom rolls
  6. Fabric capacity: 17 meters
  7. Distance between liquid surface and upper roll: 200 mm
  8. With temperature display and large glass window
4. Wash Box
  1. Made of #304 steel of 3 mm thickness
  2. Diameter of guide roll: 150 mm
  3. Material of roll: OCR18NI9TI
  4. Distance between upper and bottom rolls: 1000 mm
  5. (9) upper rolls and (10) bottom rolls
  6. Fabric capacity: 25 meters
  7. Distance between liquid surface and upper roll: 200 mm
  8. With temperature display and large glasses window
5. Nip-Roll Device (Pad)
  1. Vertical roll arrangement
  2. Pressure of rolls: 3 tons
  3. Bottom roll: diameter 225 mm steel roll, seamless pipe covered with 3 mm steel plate
  4. Upper roll: diameter 250 mm, covered with rubber (thickness 22.5 mm)
  5. Power: 2.2 kW AC motor
  6. Diameter of air cylinder: 160 mm
6. Nip-Roll Device (Pad)
  1. Vertical roll arrangement
  2. Pull down type
  3. Rated pressure: 6 tons
  4. Upper roll: diameter 300 mm, wrapped with rubber (thickness 22.5 mm, shore 70°C)
  5. Power: 2.2 kW
  6. AC bottom roll: 5.5 AC motor, diameter of air cylinder 250 mm, shore 85°C rubber cover
  7. Prefeed upper expanding roll diameter 125 mm
7. Vat Ager (to reinforce coloration)
  1. Capacity: 60 meters
  2. Steam temperature: 102°C ± 1°C
  3. Fabric feed roll: #316 steel
  4. Diameter of feed roll: 150 mm
  5. Center distance between feed rolls: 1000 mm
  6. Heating type: rectangle heating bath
  7. Boxes made of #316 stainless steel of 4 mm, with stiffener
  8. Thermal insulation: 80 mm thick, AISI03
  9. Exterior with 1 mm stainless steel plate
8. 30-Can Dryer
  1. Can diameter: 800 mm
  2. Main motor: 3 kW
9. Intermediate Fabric Feeder
  1. #14 channel steel with photoelectrical device
10. Fabric Exit and Rewinder
  1. Main frame: 14# channel steel
  2. Independent drive
  3. Upper pressing roll
  4. Rewinder: 18# channel steel, Φ200 mm rubber rolls
  5. 2.2 kW AC motor control
  6. Fabric tank: 1.5 mm steel plates
11. Control Panel
  1. Mitsubishi PLC
  2. TPC touch screen
  3. Fabric speed meter

Compressing Air Pressure	0.6 MPa
Control system	AC Motor Inverter