Description Included Equipment Injection machine of 330 tons Injection moulds for pre-forms: 2000 ml 12 cavities, 5000 ml 4 cavities Blowing machine for bottle sizes of 2 lt and 5 lt, 2 sets, capacity: 3300/4400 bottles/hour Compressor high pressure 25 to 30 bar with 200 lt reservoirs 600 lt 30 bar reservoir Refrigerating air dryer (high pressure air heater) Filters for low and high pressure Water pumps for h2o of moulds Moulds for bottles and caps of various sizes pco 32 neck Mould for 2000 ml (two cavities) Moulds for 5000 ml (one cavity) Mould for caps (36 cavities) Tubes, piping, valves, etc Extras: bottle cap injection moulding machine Injection Machine Specifications Clamping force: 330 tons Screw diameter: 70 mm Screw l/d ratio: 18.6 Shot volume (theoretical): 989 cm3 Injection pressure: 157 mpa Injection weight: 900 g (ps) Injection rate: 324 g/s Plasticizing capacity: 42.3 g/s Screw speed: 180 rpm Moving mould-plate stroke: 630 mm Max mould height: 680 mm Min mould height: 240 mm Space between tie-bars: 660 x 660 mm Hydraulic ejector force: 65 kn Hydraulic ejector stroke: 160 mm Ejector number: 13 Max pump pressure: 16 mpa Pump motor power: 30 kw Heating capacity: 18.5 kw Machine dimension: 6.4 x 2.2 x 2.5 m Machine weight: 12 tons Blowing Machine Specifications Bottle sizes: 250 ml up to 2 lt (two cavities), 5 liters (one cavity) Theoretical output: 850 bottles/hour (up to 2 lt), 400 bottles/hour (5 lt) Max bottle height: 360 mm Max bottle diameter: 180 mm Clamping force: 150 kn Mould open stroke: 240 mm Heating power: 6 kw Machine dimension: 1.53 x 0.62 x 2.00 m Machine weight: 600 kgs Pre-form heater dimension: 1.10 x 0.0 x 1.16 m Pre-form heater weight: 220 kgs Safety: automatic emergency alarm and inter-locking device Pneumatic components: made by germany first company PP100 Blowing Machine Specifications End product material: pet/pp/pe/pc Volume: 0.05-2.5 l (2-cavity), 3-6 l (1-cavity) for 2-cavity model; 0.05-2.5 l (4-cavity), 3-6 l (2-cavity) for 4-cavity model Theoretical output: 2000-2500 pcs/h (0.5 l-0.1 l) for 2-cavity; 3300/4400 pcs/h (0.1 l-0.5 l) for 4-cavity Max length: 350 mm Max diameter: 35-110 mm (2-cavity) for 2-cavity model; 35-110 mm (4-cavity) for 4-cavity model Max mould plate dimension (l*h): 350 x 360 mm for 2-cavity; 350 x 640 mm for 4-cavity Max mould thickness: 180-260 mm Clamping force: 180 kn for 2-cavity; 360 kn for 4-cavity Mould opening stroke (adjustable): 180-260 mm High pressure compressor: >= 0.7/3.0 m3/mpa x 2 sets for 2-cavity; >= 1.2/3.0 m3/mpa x 2 sets for 4-cavity Low pressure compressor: >= 1.6/1.0 m3/mpa x 1 set for 2-cavity; >= 1.8/1.0 m3/mpa x 1 set for 4-cavity Air cooling dryer: >= 1.0/3.0 m3/mpa x 1 set Precision air filters: >= 1.0/3.0 m3/mpa x 3 pcs Height pressure air receiving tank (d*h): >= 0.6/3.0 m3/mpa x 1 set for 2-cavity; >= 0.8/3.0 m3/mpa x 1 set for 4-cavity Dimension (l*w*h): 2.2 x 1.9 x 2.2 m Power: 15 kw for 2-cavity; 25 kw for 4-cavity Voltage/frequency: 220-380 v/50-60 hz Main body dimension (l*w*h): 2.0 x 1.4 x 2.0 m for 2-cavity; 2.3 x 1.4 x 1.8 m for 4-cavity Main body weight: 2.0 t for 2-cavity; 3 t for 4-cavity Main dimension (l*w*h): 2.0 x 1.0 x 2.18 m for 2-cavity; 2.5 x 1.3 x 2.18 m for 4-cavity Conveyor dimension (l*w*h): 0.4 t for 2-cavity; 0.6 t for 4-cavity Safety: auto-emergency alarm and safety inter-locking device Bottle Cap Injection Moulding Machine Specifications Capacity: 10000 – 2000 pieces/hour Extruder power: 2.2 kw Working air pressure: 0.7 mpa Rotating motor power: 2.2 kw Heating power: 4.8 kw
