NovaStar, SZ112, Bed Sterilizer, 8g/h Ozone, 220V (New)

Description

  1. Overview
    1. Kills bacterium and vermin eggs normally in just 2 to 6 minutes.
    2. Excellent effect of deodorization, gout and stain elimination.
    3. Can dispel inorganic and organic pollutants, as well as toxicant.
    4. With vacuum sterilizing and ozone decomposing functions, the equipment can sterilize more effectively, has been patented by the national patent office.
    5. It has incorporated the most advanced technology of BNP titanium-ceramic structured ozone generator, which can generate large amount of ozone, and the lowest output of ozone can reach 8 g/h, and its working life is 3 times longer than the other average ozone generators.
    6. The interior of the sterilizer has a large powerful stainless steel electromagnetic valve which means reduced equipment downtime.
    7. Fully sealed model which prevents any ozone leakage from the equipment can ensure the safety of both patient and hospital staff.
    8. The additional ozone degradation function, which has an additional patent, can decompose the remaining ozone remained, which can prevent environmental pollution.
  2. Specifications
    1. Minimum ozone working concentration: 1200 mg/m³.
    2. Minimum ozone generated: 8 g/h.
    3. Noise: <40 dB.
    4. Operation voltage: 220 V, 50 Hz.
    5. Rating power: 200 W.
    6. Output pressure: 6 kPa.
  3. Operating Conditions
    1. The bed sterilizer should be used in the temperature range of 5 to 40 °C, and relative humidity ≥60%.
    2. The temperature lower than 5 °C may result in difficult starting and that over 40 °C may cause overheated operation of the equipment and lower its life cycle.
    3. Tie the sealed bag well and make sure that the hose and nozzle are connected well to prevent ozone leakage problems.
    4. Do not open the sealed bag once the procedure is completed, keep it sealed for 30 minutes.
    5. The inner structure of the machine has high voltage and high frequency, it is forbidden to be opened by the users.
  4. Operation Procedure
    1. Has both manual and automatic operation.
    2. Put the mattresses, bed clothes, bed sheets, pillows, etc. into the sealed plastic sterilization bags and then connect the gas feed pipes.
    3. Turn the power button on. Then choose the sterilizing time. Last, press the film switch on, and then the equipment will begin to work. Count down the time, and when the clock reaches 00, the disinfecting operation has finished.
    4. After finishing the sterilizing operation, the equipment would ring. After that, take off the gas feed pipes. The whole sterilization is finished.
    5. The device can run the complete sterilization or be stopped by the operator.
    6. You have to turn off the main switch, and switch on again, otherwise, it will not function.
    7. If device enters into ozone generating stage, all the buttons on control panel will not function.
    8. If you want to stop the procedure, turn the main switch off.
  5. Included Components
    1. Bed sterilizer - 1.
    2. Standard sealed bag - 3.
    3. Extension hose piece - 1.
    4. Power cord - 1.
    5. Manual - 1.