Composed of Cummins diesel engine and Stamford or Marathon alternator
24V DC start motor and storage battery
Brushless, self-excited, IP23, insulation class H alternator
40°C radiator as standard, 50°C is optional
Key start panel control system as standard, digital auto-start panel is optional
8-hour operation base tank
Optional open type or silent type
All generator sets are gone through rigorous testing before being released to the market place, including 50% load, 75% load, 100% load, 110% load and all protection functions (overspeed stop, high water temperature, low oil pressure, battery charging fail, emergency stop)
ISO9001:2000 quality control system
Standard Specifications
3-phase, 50 Hz @ 1500 rpm, 400/230 V (also can be made according to customers’ special requirements)
Available in various voltages
ESP = standby power standby duty, operation under variable load, without overload
PRP = prime power continuous duty operation, under variable load, 10% overload permissible 1/12 hr
Voltage regulation maintained within ±0.5% as follows: power factor between 0.8–1.0 lag, from no load to full load any steady load, speed droop variation under 4.5%
Change load from 0–100%, frequency/speed droop ratio within 5%
Load from 25–100%, any steady load frequency/speed undulation within 0.25%
TIF (MA MG1-22) better than 50
THF (BS EN60034) better than 2%
Criterion: ISO8528, GB/T2820, EN12601:2001, EN60034-22:1997, EN60204-1:2006, ISO9001:2000 quality control system
Dimension and Weight
Open type: overall size 4840 x 2060 x 2470 mm, weight 7800 kg
Silent type: overall size 6060 x 2438 x 2595 mm, weight 9200 kg
Engine Specifications
Cummins diesel engine, model KTA38-G5
Number of cylinders: 12
Cylinder arrangement: 60° Vee
Cycle: 4 cycle
Aspiration: turbocharged after water cooled
Bore x stroke: 159 x 159 mm
Displacement: 37.8 L
Compression ratio: 13.9:1
Prime power/speed: 880 kW / 1500 rpm
Standby power/speed: 970 kW / 1500 rpm
Speed governor: electrical
Cooling system: water-cooled, 40°C radiator as standard, 50°C is optional
Speed stability: <5%
Total lubrication system capacity: 135 L
Coolant capacity (without radiator): 199 L
Fuel consumption at 100% load: 201.8 g/kWh (at 1500 rpm)
Starter motor: DC24V
Alternator: AC24V
Alternator Specifications
Stamford alternator (standard), RE alternator (option)
Alternator model: RE, Stamford or Leroy Somer
Exciter type: brushless, self-excited
Power factor: 0.8
Voltage adjust range: >5%
Voltage regulation NL-FL: <+0.5%
Insulation grade: H
Protection grade: IP23
Control System
Standard: RE170HC key start providing start/stop controller, ampere meter hour counter, voltmeter and selector switch, frequency meter / water temperature gauge / oil pressure gauge / hour counter / battery voltage meter, emergency stop push button, alarm system (over speed, high engine temperature, low oil pressure, charge fail), protection system (over speed, high engine temperature, low oil pressure, emergency stop and other protection function pre-setting)
Option: Smartgen HGM6110 digital auto start
Option: Smartgen HGM6120 digital auto start (option assembled with the ATS)
Option: Deep Sea DSE5210 digital auto start
Option: Deep Sea DSE5220 digital auto start (option assembled with the ATS)
Digital auto-start generator controller integrating digital, intelligent and network techniques for automatic control system of diesel generator; functions include automatic start/stop, data measure and alarming; optionally assembled with the ATS for auto-switching between outer power and generating set power (AMF)
Functions: automatic start/stop, 3 start attempts failure and automatic crank disconnect, parameters display (V/A/Hz/Hour), engine monitoring and protection, charge alternator exiting and charge alternator fail alarm, running hour counting, setting adjustable via key buttons on front panel
Request a Quote
✓
Request sent
Thank you, our team will reply to you shortly.
Direct access to our team
Email American Plant & Equipment
Tell us what you want to buy, source, finance, or sell. A machinery specialist will follow up with you.
✓
Thank you. Your request is with the American Plant and Equipment team.
A machinery specialist will follow up with you.
Machinery updates
Subscribe to our email list
Tell us which industries you follow and we will send you the machines that match.
✓
You are on the list.
We will email you when machines that match your interests come in. Unsubscribe from any message.