Description Overview Kailin lint removal system 72” Reggiani scray box Kusters single swimming-roll padder, type 222.58-1800, year 1982, revised by Feyen in Germany in 1998, fabrication # same as previous 9168 on rebuild Reggiani 20 color print machine, type Unica, model 180/24/20, series 230/10, year 1998 E & L opening roll at entry Heater plate 20 colors Quick change machine where the operator can operate 10 stations printing while changing 10 screens without stopping Full automatic controls Steamer And Washing Section Cloth travels from the printer on a vertical conveyor to a Kusters spiral steamer Steamer approximately 30’ high x 30’ long, capacity 240 meters Goods are removed and sent to vertical J box steaming chamber with capacity of approximately 25 meters Unit is equipped with an evac water separator and vacuum system Goods travel out and are doubled once in order to go into a Kusters open width washing unit Entry is a Bianco Dogel 04 guider, year 1998, Dogel guider is 79” face Wash range has the capacity to do up to 72” fabric Washer has 2 add tanks, one with air mixer and one with electric mixer, approximately 75 – 100 gallons each A chemical dosing system to add chemical directly to the washer Cloth travels out and goes through another Kuster padder, type 222.50.1800, year 1998 Cloth travels to a nip 2-ton then into a 2-roll pneumatic guide Tenter Frame Monforts Montex 14g/k (machine #66532) tenter frame, year 1994 Complete operators platform Entry end with E & L FR1 guiding electric eye 2-roll spiral guiders Electric pinning Horizontal pin frame, 7 zone gas fired, low profile Entry field approximately 15’ Honeywell gas controls 14 fan motors Exit field on the machine has 2 small cooling sections approximately total of 5’ Exit end 8’ of rail Accumulator And Winding 1 accumulator Bianco which is approximately 100 yards Exiting going over a slot roll guiding system down onto the A-frame stations and it winds on the A-frame There are 2 separate stations for continuous A-frame winding
