Description Overview Through flow dryer for drying wet carpet after printing or dyeing The carpet lays on a perforated drum Air is sucked out of the drum by two ventilators, creating under-pressure inside the drum The ventilators blow the air to the outside of the drum and through the carpet Heating is done by large steam batteries (steam/air heat exchangers) Vertical stenter chain Specifications Carpet width: 5000 mm Maximum width: 5000 mm carpet Speed up to 30 meters per minute 2 x 55 kW ventilators with frequency controller (one left side, one right side) Steam approximately: 6 bar Temperature approximately: 140 °C Capacity kW steam approximately: 4,000 kW heating power (depending on steam pressure) Carpet speed of approximately 500 g/m² of polyamide yarn and 50% humidity: approximately 12 m/min Carpet speed of approximately 750 g/m² of polyamide yarn and 50% humidity: approximately 9 m/min Weight of the machine is approximately: 35 tons Condition Used industrial machine Included 2 x 55 kW ventilators with frequency controller Large steam batteries (steam/air heat exchangers) Vertical stenter chain Not specified
