Company founded 1975 US-based machinery business experienced in worldwide sales.

+1 (864) 574-0404
Global website

Choose your language

Languages follow BCP 47. Flags and countries are representative context only.

Automatic translation Machine specifications, model codes, and reference numbers should always be confirmed in the original listing.
Menu
Call +1 (864) 574-0404 Email Us

Ideco, H-1000 Rambler BIR, Rebuilt, 800 to 1000 HP, 12000ft Drilling Depth

Description

  1. Overview
    1. Large oil well drilling rig
    2. Ideco H-1000 Rambler BIR
    3. 800 to 1,000 hp
    4. Capable of drilling to a depth of 12,000 ft
    5. Sand line drum capable of 25,000 ft
    6. 1/8 in drilling line and grooving
    7. Ideco H1000 Rambler BIR 800 to 1,000 hp with 7 axles
  2. Draw Works
    1. Draw works has been gone through completely, rebuilt new
    2. Drum shaft and cat shaft made of astreloy installed with new bearings
    3. Rotary drive torn down and rebuilt new clutch pads and new clutch drum installed with new splined hub
    4. Draw works has all new chains, bearings and u-joints
    5. Main drum clutch has new pads with new clutch drum
    6. All oiler, air and hydraulic lines are new
    7. Driller's console is new
  3. Engines and Transmissions
    1. New Caterpillar C-18's, 630 hp each, installed with new 6061 transmissions
    2. Right angle gear boxes were inspected and rebuilt new
    3. SRR-28 hydromatic was sent to Parkersburg and rebuilt new
  4. Mast and Substructure
    1. Mast: Ideco 358,000 lb hook load quicklift 112-358 with racking board complete with stand pipe
    2. Crown rebuilt new
    3. New main cylinders and hydraulic tongs cylinders added to mast
    4. Racking board was rebuilt new
    5. Substructure: new 10 ft h x 10 ft w x 18 ft l with 2 ft h x 10 ft w x 18 ft l pony sub, winterized, with stairs
    6. Has rebuilt new hydraulic backup system and all new fluorescent lights and wiring that meets all specifications
    7. Sub was sandblasted and has new beams
  5. Rotary Table, Swivel and Kelly
    1. Rotary table: Ideco 37 1/2 in table, work by Farley's machine shop
    2. Swivel: National N-815 with quick change, work done by Burgess Rig Repair
    3. Kelly hose: 4 in x 55 ft
    4. 5 1/4 in hex kelly
  6. Blowout Preventer (Bop) Equipment
    1. Used 11 in 5,000 psi Schaffer double gate
    2. Annular: used 11 in 5,000 psi Hydril annular
    3. Used 3 in x 4 in 5,000 psi choke manifold
  7. Mud Tanks (Refurbished)
    1. Shale tank: equipped with 2 Swaco ALS shakers with two new 5 in x 6 in circulating pumps with 50 hp motors, 1 new 2 cone desander and one poor boy gas buster, 1 agitator, with all lighting and electrical and wedge type mud gates
    2. Suction tank: equipped with two new 5 in x 6 in circulating pumps with 50 hp, one 10 cone desilter, three agitators and mixing hopper, complete with all lighting and electrical, new wedge type mud gates
    3. Mud tanks were rebuilt new
  8. Mud Pumps
    1. Rebuilt new Gardner Denver PZ-9, American made, in a house with new 3508 Caterpillar engine, 1,200 rpm, and a new 5 in x 6 in charging pump with 50 hp electric motor
    2. New dampener and new valving, radiator is independently driven with electric motor
    3. Rebuilt new Gardner Denver PZ-9, American made, in a house with new 3508 Caterpillar engine, 1,200 rpm, and a new 5 in x 6 in charging pump with 50 hp electric motor
    4. New dampener and new valving, radiator is independently driven with electric motor
  9. Generator House
    1. Contains 2 new 3406 Caterpillar 410 kw generators
    2. Also two new Gardner Denver 30 hp screw air compressors
    3. 1 four station rebuilt new accumulator with new remote
    4. 1 new 10 kw electric heater
    5. 75 kva transformer
    6. New complete 480 volt electric panel
    7. New fuel day tank and new oil bunker included
  10. Water Tank
    1. 10 ft w x 38 ft l x 9 ft h, 350 bbl capacity
    2. With 2 new 2 in x 3 in circulating pumps
  11. Doghouse
    1. Like new 8 ft w x 18 ft l
    2. Contains new electric panel and lockers
    3. Has electrical controls for equipment in doghouse
    4. Doghouse drops into water tank
  12. Hands Change and Parts House
    1. Contains lockers and shelving for parts
    2. Rig complete with new all lights and electrical
  13. Additional Equipment
    1. Martin Decker diaphragm and indicator
    2. Fuel tank: 8,000 gallon with new electric pumps
    3. New cat walk: 42 in h x 4 ft w x 52 ft l with new beaver slide, complete new set of stairs, railings and tarps
    4. Ramps: 3 piece (2 - 2 ft h x 71 ft l and 1 - 9 ft 10 in w x 34 ft 5 in l)
  14. Drill Pipe and Collars
    1. 21 4 1/2 in spiral wt. pipe
    2. 6 pipe baskets
    3. 3 pipe racks
    4. Canvas
  15. Used Handling Tools
    1. Used tongs
    2. Used elevator
  16. Spare Equipment
    1. 6061 transmission
    2. 1 1/8 in Lebus grooving
    3. Spare drive lines and u-joints
    4. Rebuilt new main hydraulic cylinders
    5. Set of brake bands
    6. Set of cables for doghouse and water combo
    7. Both catheads that were taken off