Description Overview High pressure pir foaming system (two components) Voltage: 380 V, 50 Hz Specifications Output Mdi: 240 to 1200 kgs per hour Output polyol: 200 to 1000 kgs per hour Core density: minimum 40 kgs per cubic meter Working pressure: 100 to 150 bars Metering Pump High pressure axial piston pump Pump and motor are connected by a magnetic coupling with no leakage Equipped with a flow meter, safety valve, pressure sensors, and metered pumps Raw Material Storage and Temperature Adjustment Double sealed and pressurized tank with a visual level gauge Equipped with a safety valve, upper and lower limit, and magnetic flap Join sealing magnetic stirrer Pressure control valve with gauge Temperature sensors allow for automatic temperature adjustment Chiller (optional) Heater (optional) Electrical Control System Controlled by PLC Injection Device (Linear Type With Mixing Head) Used to make the rigid pir that is applied to insulation boards, refrigerators, pipe insulation and artificial wood Reflux loop and self-cleaning design, with t-type hedge nozzle Mixing head valve, piston, and nozzle are all made with alloy steel of high strength The Mold Max block size: 6000 x 1000 x 500 mm Machine working speed: 30 minutes per block Used to ensure that the raw pir material can be expanded into good rigid products in a closed area Four door structure Bottom and back vertical plates are linked by chains Roof plate controlled by a cylinder Pir Cutting Machine (Customer Self-Provided) Quantity: 1
