The wooden feeding horizontal lattice up to 3000mm long
The pre-opening machine incorporates beaters to open fiber
The machine frame is made by high quality welded carbon steel with 10mm thick plates
The opener is equipped with high power magnet to remove the metal debris
The high speed fiber feeding centrifugal fiber movement fan is independent, the feeding motor and opening roller’s motor are interlocked, while the feeding is equipped with backward and forward control
Blower fan motor is 2.2kW
When the feeding lattice and rollers are running, they are controlled by the photo electric in the collector cabinet
S-130 Main-Opener
1 set
Machine width: 1300mm
Output: 280kg/h
Speed of conveyor lattice: ≤10m/min
The main opener clothed with HN wire clothing to open fibers
The machine frame is made by high quality welded carbon steel with 10mm thick plates
The opener is equipped with high power magnet to remove the metal debris
The high speed fiber feeding centrifugal fan is independent, the feeding motor and opening roller’s motor are interlocked, while the feeding is equipped with backward and forward control
Blower fan motor is 2.2kW
When the feeding lattice and rollers are running, they were controlled by the photocel controls in the collector cabinet
M-185 Chute Feed
1 set
Machine width: 1850mm
Output: 260kg/h
The machine is suitable to mix and feed evenly into the garnett
Vibrating plate is adjustable
With photoelectric sensor to control cotton feeding rate
Front and back cotton boxes
L-200 Single-Cylinder, Double-Doffer and Double-Random-Roller Carding Machine
1 set
Machine width: 2000mm
Output: 260 kg/h
Diameter of the main cylinder: Φ1230mm
kW of the main cylinder: 15kW
kW of the pre-cylinder: 11kW
Diameter of the doffer: Φ492mm
Installed capacity: 19.65kW
Single web: 8 to 16g/m² × 2
Machine weight: about 10000kg
With enclosed safety defence device and catwalk
Equipped with random rollers, output is controlled by inverter motor
Feeding device included safeguard system to inspect for metal material, installed with auto-stop alarm at back of the machine
The cylinder main motor and the feeding rollers are controlled by inverter
Output speed: ≤45m/min
Cylinder run-out: ≤0.04mm
The cylinders, doffers, working rollers, stripped rollers, and random rollers are all accurately manufactured
Including rollers to strip fiber
Static-free endless belts are used for the conveyor lattice
M-290 Horizontal Crosslapper
1 set
Width of output apron: 2900mm
Speed of output apron: 1-12m/min, adjustable
Speed of lapping: 20-40m/min, adjustable
This machine is mainly used to lap the carded fiber according to the set thickness and width for next work process
The lapping is controlled by a separate inverter to ensure the quality of the web evenly
The reciprocal controlling signal has an infrared photo electric unit
All the motors are inverters controlled
The adjustable height of the bottom lattice of the cross lapper is 1000mm
The bottom apron of the cross lapper are wooden lattice; input apron is with static-free PVC
The lift-drop of bottom lattice is manually controlled
X-290 Oven
1 set
Machine length: 6000mm
Working width: 2900mm
Setting temperature: ≤220°C
Speed of the conveyor belt: 1 to 18m/min (inverter controlled)
Fan motor: 22kW × 2 sets, inverter controlled
Teflon conveyor belts
Feeding type: upper and lower clamping
Heating: diesel oil direct burning (or gas)
The upper belt can move up and down
Output device includes cooling pressing rollers, and cooling fans
Hot-air circulation is by blowing (and penetrating through the materials)
Consisting of 2 blowers
Cooling System
1 set
Width: 2700mm
Diameter of cooling water roller: 250mm
Length of cooling water roller: 2700mm
Cooling fan: 2.2kW
Rewinding and Edge Cutting Machine
1 set
Working width: 2700mm
Line speed: 1 to 15 m/min
Power: 2.2kW
(5) electric lengthwise blades and (1) crosswise blade
Photoelectric measuring unit
Digital meter counting
Cutting into panels (for thick webs)
Rewinding roller inverter control
Two roll winder fabricated with seamless steel pipe wrapped with rubber
Request a Quote
✓
Request sent
Thank you, our team will reply to you shortly.
Direct access to our team
Email American Plant & Equipment
Tell us what you want to buy, source, finance, or sell. A machinery specialist will follow up with you.
✓
Thank you. Your request is with the American Plant and Equipment team.
A machinery specialist will follow up with you.
Machinery updates
Subscribe to our email list
Tell us which industries you follow and we will send you the machines that match.
✓
You are on the list.
We will email you when machines that match your interests come in. Unsubscribe from any message.
