Fare, Fibre Production Line, 2001, PP and PES Fibres, 660-750 kg/h, 160mm Extruder

Description

Overview
1. Make: Fare
2. Year of construction: 2001
3. Raw material: Pp and pet granulate
4. Final product: Pp and pes fibres
5. Fibre dimensions: 6,8 – 17 dtex
6. Capacity: 660 kg/h – pp fibres, 750 kg/h – pes fibres
Composed Of
1. Crystallisation and drying
  1. Volume: 3,5 m³
  2. Capacity: 1300 kg/h
  3. Temperature: 20-200 °c
  4. Final humidity: 0,003 % from weight
  5. Power: mixer and air heater: 96 kw, rotary valve entrance: 0,75 kw, rotary valve exit: 0,75 kw, mixer: 1,5 kw, fan: 18,5 kw, heating: 96 kw
  6. Water consumption: 20 l/min
  7. Max. water temperature: 20 °c
  8. Max pressure of water: 200 kpa
  9. Weight with material: 3600 kg
2. Dryer for granulate
  1. Volume: 5,5 m³
3. Extruder
  1. Diameter: 160 mm
  2. Dimensions l/d: 32/1
  3. Heating power: 158 kw
  4. 7 heating zones
4. Spinning system
  1. Dosing pump: 0,5 l/rev
  2. Power: 25 kw
  3. Power of spinning pump: 5,5 kw
5. Spinning disk i
  1. Number of cylinders: 7
  2. Velocity: 10-100 m/min
  3. Temperature of cylinders: 90 °c
  4. Power: 60 kw
6. Spinning disk ii, iii
  1. Number of cylinders: 7
  2. Velocity: 20-200 m/min
  3. Temperature of cylinders: 90 °c
  4. Power: 115 kw
7. Crimping system
  1. Width: 140 mm
  2. Velocity: 200 m/min
  3. Power: 33 kw
8. Oven
  1. Width: 1500 mm
  2. Fan: 78000 m/h
  3. Temperature: 140 – 200 °c
  4. Two heating sections
  5. One cooling section
9. Cutting
  1. Length of fibre after cutting: 66 mm
10. Press
  1. Capacity: 750 – 1000 kg/h
  2. Weight of bale: 200 kg ± 50 kg
11. Oven for die set
  1. Power: 50 kw
  2. Temperature: 700 °c

Capacity	660 kg/h (PP fibres), 750 kg/h (PES fibres)
Fiber Dimensions	6.8 - 17 dtex