2 supports and 2 pillars made of sectional steel with traverse, self-supporting
1 touching bar made of stainless steel SS316
1 variable tension rail with 2 touching bars made of stainless steel, manually adjustable
1 cloth guiding system for woven fabrics KF 2020 with width adjusting frame
1 additional stainless steel guide-roller, Ø 177 mm, for working from batch instead of trolley
Item 2: High Efficiency Squeezer
Linear pressure: 10 N/mm
2 steel frames with traverses
1 supporting roll 290 mm diameter, ebonite coated
1 pressure roller 290 mm diameter, rubber coated
1 pressure application by cylinder, simultaneously working on right and left hand shaft
1 hand protection in front of the nip
1 guiding roller 177 mm diameter, stainless steel at the outlet
1 drain sheet
1 bent free-wheel expanding roller
1 pendulum compensator with pneumatic discharge
1 reduction gear
1 trough with guide roller Ø 177 mm stainless steel, with external bearings including liquor feeding pipe
1 liquor drain valve, manually operating
Item 3: Cylinder Dryer
Outside diameter of cylinder: 800 mm
Number of drying cylinders: 16 (4 with teflon coated at entry)
Number of stacks: 2 (two stack)
Cylinder face: 3300 mm
Maximum fabric width: 3400 mm
Maximum working pressure: 5 kg/cm²
Hydraulic testing pressure: 9 kg/cm²
Material for construction of cylinder jacket is stainless steel AISI 304, and has wall thickness of 3 mm
Drying cylinder: the cylinder jackets are made of stainless steel sheet with two longitudinal joints welded by argon arc method and polished over their full length by endless emery belt
Steel trunnions truly machined are bolted to the cylinder ends; each cylinder is provided with one inch diameter vacuum breaker valve and also fitted with anti collapsible rings
Cylinders are arranged vertically on steel pillar machined wherever required
Steam and condensate pipings: each cylinder is provided with rotary joint for steam supply and condensate collection
The rotary joints are connected to vertical steam and condensate header by flexible pipings
Condensate is collected by a rigid syphon pipe and passes through the rotary joint to the vertical condensate header; each cylinder is provided with a steam trap
For condensate recovery system, each cylinder is provided with a shut off valve, strainer, steam trap, and direction control valve (DCV)
Separate piston valve is provided on flexible hose pipe at individual steam connection of each drying cylinder
The steam supply header is provided with an air vent and a steam valve
A horizontal steam supply pipe is provided for the machine with more than one stack
1 bent revolving expander at entry of each stack
Alternate cylinder is provided individual geared motor (SEW make)
Item 4: Exit Plaiter
1 frame with traverses
1 pulling roller 177 mm diameter with jockey roll and plaiting down assembly
1 pendulum compensator, pneumatically, in inlet section consisting of pendulum roller and pneumatic control for fabric tension adaptation
1 gear drive unit
Item 5: Drive
The machine will be driven by electro motoric variable speed drive complete with motors, reduction gear, and control panel
Condition
Machine is in excellent condition
Stopped on mill floor
All certificates of cylinders available
Transportation
For transportation you need: 2 x 40’ containers HC
Request a Quote
✓
Request sent
Thank you, our team will reply to you shortly.
Direct access to our team
Email American Plant & Equipment
Tell us what you want to buy, source, finance, or sell. A machinery specialist will follow up with you.
✓
Thank you. Your request is with the American Plant and Equipment team.
A machinery specialist will follow up with you.
Machinery updates
Subscribe to our email list
Tell us which industries you follow and we will send you the machines that match.
✓
You are on the list.
We will email you when machines that match your interests come in. Unsubscribe from any message.
