Description Overview Productivity: 14 strings/min Hot melt application system: Norsdon (USA) or Robatech (Switzerland) Gluing method: continuous/interrupted gluing mode Coiling head: one servo coiling head Control of assembling platform: electronic control Possibility of assembling zoned tape: impossible Possibility of assembling zoned mattress: possible Operation and application: manual Working principle: servo control Spring shape standard: barrel and cylinder Specifications Air consumption: approximately 0.25 m³/min Air pressure: 0.6 to 0.7 mpa Total power consumption: approximately 7 kilowatts Voltage: 3AC, 480V Frequency: 50/60 Hz Power requirement: input current 18A Cable section: 3 x 16 mm² + 2 x 4 mm² Working temperature: 5 degrees to 45 degrees Weight: approximately 3800 kilograms Consumable Material Data Non-woven fabric: fabric density 65 to 80 g/m² (normally 70 g/m²) Fabric width: 450 to 2200 mm Inner diameter of fabric roll: minimum 60 mm Outer diameter of fabric roll: maximum 600 mm Steel wire: wire diameter 1.1 to 2.1 mm Inner diameter of wire roll: minimum 320 mm Outer diameter of wire roll: maximum 1000 mm Acceptable weight of wire roll: maximum 800 kilograms Working Range Option 1: spring waist diameter (D) 45 to 75 mm, pocket spring height (H) 100 to 250 mm Option 2: spring waist diameter (D) 37 to 60 mm, pocket spring height (H) 80 to 200 mm Hot Melt Glue Shape: pellet or pieces Viscosity: 125 degree C to 6100 cps, 150 degree C to 6100 cps, 175 degree C to 6100 cps Softening point: 85 + 5 degree C Condition Used industrial machine in working condition
