Description Overview Uster Delta 110 yarn drawing machine Year of manufacture: 2004 to 2005 Performance: 3 to 4 warps per 8 hours Drawing speed up to 140 ends per minute Maximum width: 2300 mm Flange diameter maximum: 1200 mm Yarn layer with or without lease 1 warp beam Material for moco and multifilament or staple fibre yarns Count range: dTex 33 to 330, den 30 to 330, Nm 8 to 100 cotton blends; Nm 4 to 50 woolen and blends Yarn density: 5 to 120 ends/cm Frequency: 50 and/or 60 cycles 2 trolleys Healds With Open End Eyes Heald width: 2.2/2.5/5.5 mm Heald length: 260 to 382 mm Thickness: 0.23 to 0.38 mm Heald type: simplex and duplex End eyes: open J-type and C-type Thread eye: minimum 1.2 x 5.5 mm Thread eye offset maximum: 10 mm Number of frames: maximum 20 Healds With Close End Eyes Heald width: 2.2/2.5/5.5 mm Heald length: 260 to 382 mm Thickness: 0.23 to 0.38 mm Heald type: simplex and duplex End eyes: closed O-type Thread eye: minimum 1.2 x 5.5 mm Thread eye offset maximum: 10 mm Number of frames: maximum 16 Drop Wire Droppers width: 7.0 to 11 mm Drop length: 145 to 180 mm Drop wire thickness: 0.2 to 0.65 mm Drop wire type: open and closed Number of rails: 6 Drop wire feed: 1 Reed Maximum reed width: 0.35 to 2.3/4.0 meters Reed count: 20 to 500 teeth per dm Type: tin or plastic Tooth height: 40 to 100 mm Reed height: 80 to 150 mm Profile: flat, tunnel or double reeds Machine Equipped with camera reed advance control system Equipped with flashlight each yarn operation in the reed
