Pamasol, Aerosol Foam Filling Line, 2011, 120 Cans/Min, Class 1 Div 2

Description

  1. Overview
    1. Has run only approximately 40,000 cans, then shut down.
    2. Class 1, Div 2 line; can run 120 cans per minute.
    3. Current set up: 35mm to 45mm diameter x 40mm to 60mm can height.
    4. Capacity up to 120 cans/minute.
    5. Change parts for 5-52 ml and 10-133 ml filling capacities.
    6. 35mm to 45mm diameter can change parts.
    7. 40 to 200mm can height range.
    8. Explosion proof design, Class 1, Div 2.
    9. Built 2011 and fat tested only.
  2. Included Components
    1. Accumulation table.
    2. Pamasol cleaner and printer.
    3. Groninger filler with weight check typ Dfk 12001.
    4. Pamasol bottle loader.
    5. Pamasol filler (propellant filler is in outside xp room).
    6. Ocs checkweigher.
    7. Pamasol waterbath and leak detection.
    8. Pamasol button insertor.
    9. Pamasol overcap (dust cap) insertor.
    10. Capmatic pharmastar labeler.
    11. All manuals, drawings and documentation is available with the line.
  3. Line Components Detail
    1. Bottle unloading/feed conveyor.
    2. Pamasol type can cleaner/coder/reader.
    3. Project# 5030, Groninger filler, model Dfk1201, dual fill stations with (6) filling heads each and inline check weigh.
    4. Pamasol valve sorter, type 2047-500/012, with elevator.
    5. Pamasol filler.
    6. Pamasol propellent filler, type Cgr/gasser, Ocs check weigher, type Hc, rated 1000 grams.
    7. Pamasol leak detector and drying conveyor, type 3000-200/004, with type Eco120l water test bath.
    8. Pamasol button inserter/crimper/water bath, project# 5030.
    9. Pamasol dust cap inserter, type 2033-022.
    10. Capmatic wrap around labeller, type Labelstar, model Monostar.
    11. All machines built 2011.