Solar, Titan 130, 15 MW, 50 Hz, Dual Fuel (Gas/Diesel)

Description

  1. Overview
    1. Gas turbine
    2. Titan 130 industrial, single-shaft
  2. Compressor
    1. Axial compressor
    2. 14 stages
    3. Variable geometry
    4. Vertically split case
    5. Compression ratio: 16:1
    6. Speed: 11,197/11,170 rpm (50/60 Hz)
  3. Combustion Chamber
    1. Annular combustion chamber
    2. Conventional or lean-premixed, dry, low emission (Solonox)
    3. 21 fuel injectors (conventional)
    4. 14 fuel injectors (Solonox)
  4. Turbine
    1. 3 stage, axial flow
    2. Speed: 11,197/11,170 rpm (50/60 Hz)
    3. Proximity probe vibration transducers
  5. Main Reduction Drive
    1. Epicyclic
    2. 1500 or 1800 rpm (50 or 60 Hz)
    3. Acceleration vibration transducer
  6. Generator
    1. Continuous duty rating
    2. Salient pole, 3 phase, 6 wire wye connected, synchronous with brushless exciter
    3. Open drip-proof construction
    4. Sleeve bearings
    5. Velocity vibration transducers
    6. Permanent magnet generator
    7. NEMA class F insulation with F rise
  7. Package
    1. Steel base frame with drip pans
    2. Direct-drive AC start system
    3. Natural gas fuel system
    4. TurboTronic 4 control system with ControlLogix controller, standard display with discrete event log, strip chart, historical trend, maintenance screen, gas turbine and generator control, vibration and temperature monitoring, CGCM (combination generator control module) with load share, auto synchronization, voltage control, reactive power control, kW control
    5. Integrated lube oil system with turbine-driven lube pump, pre/post lube pump, backup lube pump, air/oil cooler, integral lube oil tank, lube oil tank heater, oil mist eliminator, simplex lube oil filter
    6. Documentation including drawings, quality control data book, inspection and test plan, test reports, operation and maintenance manuals
    7. Factory testing of turbine and package
  8. Optional Equipment
    1. Generator options: standard voltages of 11,000 V (50 Hz); 12,470, 13,200 or 13,800 V (60 Hz)
    2. Fuel systems: liquid, dual (gas/liquid), alternate fuels (such as naphtha, propane, low BTU gas)
    3. Lube oil system: water/oil lube oil cooler, duplex lube oil filters, vent flame trap
    4. Control system: auxiliary and remote display/control terminal, heat recovery application interface, serial link supervisory interface, turbine performance map, printer/logger, field programming terminal, unfired waste heat recovery system control (stand-alone panel), multi-unit applications: load shed control (stand-alone panel), import/export, kW/kVAR control (stand-alone panel)
    5. Accessory equipment: 120-VDC battery/charger system, turbine cleaning system: on-crank and on-line
    6. Weatherproof acoustic enclosure
    7. Ancillary equipment: inlet and exhaust silencers, self-cleaning or prefilter/barrier air inlet filter, inlet evaporative cooler, inlet chiller coils
  9. Nominal Performance
    1. Output power: 15,000 kWe
    2. Heat rate: 10,230 kJ/kWe-hr (9695 BTU/kWe-hr)
    3. Exhaust flow: 179,250 kg/hr (395,180 lb/hr)
    4. Exhaust temperature: 495°C (925°F)
    5. Nominal rating per ISO at 15°C (59°F), at sea level, no inlet/exhaust losses, relative humidity 60%, natural gas fuel with LHV = 35 MJ/Nm³ (940 BTU/scf), no accessory losses
    6. Engine efficiency: 35.2%
    7. Standard and high ambient ratings available
  10. Package Dimensions
    1. Length: 14,021 mm (46' 0")
    2. Width: 3327 mm (10' 11")
    3. Height: 3302 mm (10' 10")
    4. Approximate weight: 73,668 kg (162,409 lb) unenclosed dry weight
  11. Left Side Connections
    1. Lube oil: vent, drain, cooler
    2. Generator control box, power
    3. Drip pan drain
    4. Package ground
    5. DC power - electronic actuator
    6. Generator monitor box
    7. AC power - starter motor
    8. Generator terminal box (line)
    9. Turbine control box
  12. Right Side Connections
    1. Combustor and exhaust diffuser drain
    2. Fuel: inlet, filter drain, vent
    3. Package air supply with liquid fuel atomizing, self-cleaning filter, solenoid actuation
    4. Turbine cleaning fluid inlet
    5. AC power for liquid fuel primary pump, lube oil tank heater, pre/post lube oil pump
    6. Air inlet duct drain
    7. Package ground