Caterpillar, D8T LGP WH, 2019, Waste Handler Dozer, Reconditioned, 6,510 Hours, Semi U LGP Blade with Trash Rack, 38 Inch Track Shoes

Overview

1. Factory waste handling landfill arrangement

2. Completed and work ready

3. Rated at 348 HP (259.5 kW (348 hp))

4. Weight 86,000 LBS (39,009 kg (86,000 lb))

Machine Hours

1. Machine hours: 6,510

2. Neutral hours: 2,506

Equipment And Features

1. CAT Semi U LGP blade with trash rack

2. 38 inch (965.2 mm (38 in)) trapezoidal track shoes

3. Rear striker bar/counterweight assembly

4. Final drive seal guards

5. Clamshell final drive seal guards

6. Pivot shaft seal guards

7. Auto reverse cooling fan

8. Debris resistant radiator

9. Fuel tank guards

10. Bogie suspension rollers

11. Heavy duty bottom guards

12. CAT Slope Indicate

Inspection And Warranty

1. Complete detailed TA1 Plus inspection by the Caterpillar dealer

2. All performance and pressure checks performed

3. All oil filters cut open for inspection

4. Caterpillar 12 month / 2,000 hour powertrain warranty

5. Inspection by the area Caterpillar dealer can be arranged

Dealer Work At 6,510 Hours

1. Stripped all belly pans, covers and panels for power washing

2. Completed CAT TA1 Plus inspection

3. Updated ECM flash files

4. Changed and cut open all oil filters and inspected for contaminants - all clean

5. Serviced emissions system

6. Inspected magnetic plugs/screens and suction screens - all clean

7. Changed fuel tank breather and cleaned filler screen

8. Changed transmission and hydraulic breathers

9. Changed all air filters and cab filters

10. Serviced engine; checked for logged and active codes and repaired; checked applicable service letters

11. Changed engine, transmission, hydraulic and final drive oils

Pressure Checks To OEM Spec

1. Fan pressure and speed (fan calibrations)

2. Engine RPM high and low idle

3. Engine oil pressures

4. Fuel pressure

5. Transmission and torque converter

6. Torque converter stall speed

7. Full stall boost and speed

8. All steering system checks

9. Brake pressure checks

Repairs Completed

1. Removed ARD head, cleaned and installed new ARD spark plug

2. Repaired exhaust leaks; replaced failed NOx sensor; replaced or cleaned all EGR sensors; ran all needed emissions tests

3. Removed DOC and DPF filter for cleaning; replaced all clamps on CEM unit and cleaned

4. Replaced battery power cable and cleaned all frame grounds; serviced electrical junction box

5. Replaced all worn or leaking hydraulic, steering and fuel lines

6. Replaced lower radiator hose and drain taps, replaced coolant; replaced leaking heater taps

7. Installed rebuilt starter, rebuilt alternator and rebuilt turbo

8. Repaired cab electrical wiring, work lights and wiring, cab doors and latches

9. Completed valve set and resealed leaking valve covers

10. Removed track frames; replaced both cannon seals and sleeves; replaced pivot shaft seals; replaced final drive Duo Cones and Duo Cone guards

11. Removed hardbar, machined and installed new bushings; assembled and installed track frames

12. Installed new CAT track groups with 38 inch (965.2 mm (38 in)) track shoes and new sprocket segments

13. Rebuilt seat suspension; replaced A/C dryer and A/C accumulator

14. Cosmetic and welding repairs, blade repairs, replaced worn blade pins and bushings, line bored blade joints

15. Sandblasted, primed, painted, new decals and detailed; greased

Service History

1. 2,000 hour service at 6,125 h

2. 500 hour services at 5,642 h and 5,430 h

3. DPF serviced at 5,142 h

4. 5,000 hour service at 5,105 h

5. New DEF injector and new ARD head at 4,345 h

6. New A/C compressor and dryer at 4,264 h

7. 2,000 hour service at 3,958 h

8. 1,500 hour service at 3,507 h

9. 1,000 hour service at 2,942 h

10. 500 hour service at 2,548 h

11. New cab fan motor at 1,442 h