Clark Aiken, 1990s, Roll to Roll Embossing Line for Paperboard, 60 in (1,524 mm) Max Width, 72 in Roll Diameter, 480 V, with 16 Steel Embossing Rolls

Overview

1. Used machine, under power and can be viewed running

2. Year: 1990s

3. For paperboard caliper 0.016 to 0.024 in

Specifications

1. Max roll width: 60 in

2. Max roll diameter: 72 in

3. Core sizes: 4, 10 and 12 in

4. Drives: 480 V electric drives (Reliance and Joliet)

5. Rewind motor: 40 HP (29.8 kW (40 hp))

6. Embossing motor: 25 HP (18.6 kW (24.9 hp))

7. Floor space: approximately 75 ft (22.9 m (75.1 ft)) long x 25 ft (7.6 m (24.9 ft)) wide

Operating Data

1. Last production run: 6,665 linear feet per hour at 800 pounds (363 kg (800.3 lb)) of pressure

2. Normal pressure: 800 to 900 pounds (363 to 408 kg (899.5 lb))

3. Highest pressure used: about 1,200 to 1,400 pounds (544 to 635 kg (1,400 lb))

Included Rolls

1. 16 steel top embossing rolls in various patterns, some with bearings

2. 8 hard rubber lower rolls

3. Spare rolls can be etched to any pattern

4. Condition of the spare rolls unknown beyond the bottom roll and 4 steel rolls used in the machine