NovaStar, MS572, Inclined Belt Conveyor, 470 m Horizontal Length, 800 mm Steel Cord Belt, 300 t/h, 20 Degrees (New)

Description

  1. Overview
    1. New fixed inclined belt conveyor for bulk rock, complete with drive, controls and belt
    2. Horizontal conveyor length: 470 m (1,542 ft)
    3. Lifting height: 170 m (558 ft)
    4. Inclination angle: 0 to 20 degrees
    5. Rated conveying capacity: 300 t/h (331 short tons per hour)
    6. Designed for barite rock, particle size up to 50 mm (2 in)
    7. Installation: outdoor, above ground
    8. Ambient temperature: -5 C to 48 C (23 F to 118 F)
    9. Weight: 127,953 kg (282,088 lb)
  2. Belt
    1. Belt width: 800 mm (31.5 in)
    2. Steel cord belt ST1250, top and bottom covers 6 mm + 6 mm, DIN Y abrasion grade
    3. Belt length supplied: 1,017 m (3,337 ft)
    4. Belt speed: 2.8 m/s (551 ft/min)
    5. Deep trough design, plain belt (no chevron pattern needed)
  3. Drive
    1. Single head drive
    2. 4-pole explosion-proof variable-frequency motor, 480 V, 60 Hz
    3. Reducer with cooling fan, ratio 28
    4. Explosion-proof hydraulic coupling
    5. Electro-hydraulic thruster explosion-proof brake
    6. Backstop (holdback)
    7. Quick-release spring coupling, with high-speed and low-speed coupling guards
    8. Drive pulley, 1000 mm (39.4 in) diameter, cast diamond rubber lagging
    9. Bend pulleys: 2 x 800, 2 x 630 and 2 x 400 mm (31.5, 24.8 and 15.7 in), cast rubber lagging
    10. Pulley bearings: SKF or FAG; motor and reducer bearings: NSK, FAG or SKF
  4. Idlers and Belt Cleaning
    1. 386 troughing forward-tilt carrying idler sets, 133 mm (5.2 in) rolls, 45 degrees
    2. 150 flat return idler sets, 133 mm (5.2 in) rolls
    3. Transition idler sets at 10 and 20 degrees
    4. 9 upper and 9 lower friction self-aligning (training) idler sets
    5. 4 impact idlers at 35 degrees and an impact bed at the loading point
    6. 3 spiral return idler sets and 6 V-return forward-tilt idler sets
    7. Polyurethane H-type cleaner, tungsten carbide P-type cleaner and 2 V-plow cleaners
  5. Take-Up and Structure
    1. Vertical gravity take-up with support frame, counterweight blocks, guard fence and protective grating
    2. 2 head frames, tail frame and intermediate frame
    3. 160 support legs, 1200 mm (47.2 in) high
    4. Head chute with liner
    5. Loading chute: 5 x 1500 mm (59.1 in) skirt sections with front curtain, rear baffle and anti-overflow skirt
    6. 3 belt press wheels
    7. Tail guard and snub pulley guard fence
    8. Intermediate frame railing, 251 m (823 ft)
    9. Fiberglass rain cover, 3 mm, over about 498 m (1,634 ft)
  6. Safety and Monitoring
    1. 26 two-stage belt misalignment switches
    2. 26 bidirectional pull-cord emergency stop switches with 490 m (1,608 ft) of pull cord
    3. Belt speed detection
    4. 2 longitudinal belt tear detectors
    5. Chute blockage detection
    6. Integrated protection unit and 2 signal repeaters
    7. Field devices explosion-proof, with address codes
  7. Electrical and Controls
    1. Master control system: VFD cabinet, automation cabinet and cabling
    2. Power cable from the distribution room to the main motor (100 m (328 ft) run), with cable trays
  8. Standards, Packing and Delivery
    1. Design standards: CEMA, DIN
    2. Packing: export seaworthy plywood cases and pallets
    3. Delivery: about 75 to 80 days after deposit and approval of the general arrangement drawing
    4. Warranty: 18 months from delivery or 12 months after commissioning