NovaStar, DN162, CNC Dual Blade Oscillating Contour Cutter, 2100 x 3000 x 1250 mm Foam Block, 8.5 kW (New)

Description

  1. Overview
    1. CNC automatic horizontal and vertical foam cutting machine with 2 oscillating blades (1 horizontal, 1 vertical)
    2. Cuts 2D and 3D contours in flexible PU foam blocks
    3. Fully automatic computer control with servo drives
    4. Conveyor belt worktable moves the foam block through the cutting frame
    5. Condition: new
  2. Cutting Capacity
    1. Maximum foam block width: 2100 mm (82.7 in)
    2. Maximum foam block length: 3000 mm (118.1 in)
    3. Maximum foam block height: 1250 mm (49.2 in)
    4. Foam density: up to 80 kg/m3 (5 lb/ft3) flexible foam
    5. Cutting precision: plus or minus 1 mm (0.04 in)
    6. Cutting speed: 0 to 10 m/min (0 to 32.8 ft/min)
    7. Table moving speed: 0 to 10 m/min (0 to 32.8 ft/min)
  3. Blades
    1. Cutting type: oscillating blade
    2. Horizontal blade: 0.6 mm thick x 3 mm wide x 2450 mm long (0.024 x 0.12 x 96.5 in)
    3. Vertical blade: 0.6 mm thick x 3 mm wide x 1470 mm long (0.024 x 0.12 x 57.9 in)
    4. Blade pressure: 6 bar (87 psi)
    5. Blade drive: belt type, horizontal and vertical 2D and 3D movement
  4. Control and Drives
    1. Control: computerized with servo system, fully automatic
    2. PC control with English-language operating system and CAD software installed
    3. Servo motors and servo drivers
    4. Geared motors and inverter (variable frequency drive)
    5. Branded buttons, switches and electrical components
  5. Mechanical Parts
    1. Branded belts or equivalent
    2. Branded chain sprockets or equivalent
    3. Branded motors
    4. Branded bearings or equivalent
    5. Toothed belts adapted to the most widely available belt sizes on the market
  6. Electrical and Utilities
    1. Total power: 8.5 kW
    2. Voltage: 480 V, 3 phase, 60 Hz
    3. Power connection: 3 phase, 5 wire supply (3 live wires, 1 neutral, 1 ground), wiring at least 2.5 mm2
    4. Compressed air supply: 8 kg/cm2 (114 psi)
  7. Dimensions and Weight
    1. Machine dimensions: 6000 mm L x 3700 mm W x 2400 mm H (236.2 x 145.7 x 94.5 in)
    2. Machine weight: 2800 kg (6,173 lb)
    3. Worktable height above floor: 600 mm (23.6 in)
    4. Operator protection: yes
  8. Included Blades and Parts
    1. Teeth blades, cutting hardness 900 to 1100 N: 7 horizontal and 7 vertical blades (service life about 56 hours per blade)
    2. 13 TPI blades (13 teeth per inch): 10 horizontal and 10 vertical blades
    3. 14 TPI blades (14 teeth per inch): 10 horizontal and 10 vertical blades
    4. 24 TPI blades (24 teeth per inch): 10 horizontal and 10 vertical blades
    5. Free spare parts: 5 cutting blades, 1 set of user's manuals, 1 set of maintenance tools
  9. Installation, Training and Warranty
    1. On-site installation, commissioning and training by technicians, typically about 5 days
    2. Buyer provides 2 operators with basic computer skills for training, and foam material for training cuts
    3. Technician travel, visa, lodging, meals and daily fee are charged extra
    4. Warranty: 12 months, limited