On-skid fuel piping in stainless steel downstream of filter
Shut-off valves
Liquid fuel grounding
Independent control of primary, secondary and tertiary liquid fuel flows
Off-skid shut-off and thermal relief valves (supplied loose for customer’s liquid fuel off-skid piping)
Liquid fuel startup assist design supplied for improved reliability
Liquid Fuel Conditioning Skid
Liquid fuel conditioning system contained on a painted carbon steel skid
Duplex liquid fuel filter
Liquid fuel pump
Instrumentation for pressure and temperature monitoring Siemens Energy, Inc.
Air Intake System
Three stage combustion air intake filter, fabricated of 316 SS
SS weather hood/vane separator, prefilter and HEPA filter
Combustion air intake silencer, fabricated of stainless steel, designed for overall sound attenuation to 85 dB(A) SPL at 3 ft (1 m) with distance measured at 5 ft (1.5 m) above grade
Expansion joint
Transition duct
90° elbow
Exhaust System
Exhaust diffuser fabricated in stainless steel
Exhaust flex
Secondary diffuser fabricated in stainless steel
Exhaust silencer fabricated in painted carbon steel with stainless steel internals, designed for an overall sound attenuation of 85 dB(A) SPL at 3 ft (1 m) 5 ft (1.5 m) above grade
Exhaust ducting fabricated in stainless steel to a stack 15 m above grade
Acoustic Enclosure
Enclosure fitted over the turbine bolted to the underbase, for average sound attenuation to 85 dB(A) SPL at 3 ft (1 m) with distance measured at 5 ft (1.5 m) above grade
Enclosure over the gearbox and generator bolted to the underbase, for average sound attenuation to 85 dB(A) SPL at 3 ft (1 m) with distance measured at 5 ft (1.5 m) above grade
Internal lighting is provided
Painted carbon steel construction with 316 SS internals
Doors and removable side panels for personnel/maintenance access
Ventilation System
Ventilation inlet and outlet dampers
Inertial filter
Ventilation inlet and outlet silencers fabricated of carbon steel, designed for an overall noise level of 85 dB(A) SPL at 3 ft (1 m) with distance measured at 5 ft (1.5 m) above grade
2 x 100% AC electric motor driven ventilation fans operating in parallel designed for Class 1, Division 2 Group D area classification, and up to a maximum ambient temperature of 104°F (40°C)
Fire and Gas System
Three (3) triple IR flame detectors
Two (2) thermal detectors
Two (2) gas detectors
Four (4) CO2 cylinders, located off main skid in a weatherproof enclosure, twin-shot fire protection system
Audible and visible alarms for extinguish and release
Suitable for Class 1 Division 2 Group D area classification
Provision for weighing the CO2 bottles to monitor charge Siemens Energy, Inc.
Gearbox and Auxiliary Gearbox
Auxiliary gearbox incorporating input shaft for start system and output drive for mechanically driven lube oil pump
Speed Reducing Gearbox
Parallel shaft speed reducing gearbox with an output shaft speed of 1800 rpm
Accelerometer vibration probe mounted on the gearbox casing
Designed for 12.9 MW(e) rated core
Couplings
Output coupling between gas turbine and gearbox
Coupling with torque-limiting device between gearbox and generator
Coupling Guard
Coupling guard fabricated of aluminum between gas turbine and gearbox
Coupling guard fabricated of aluminum between generator and gearbox
AC Generator and Electrical Equipment
An 1800 rpm, 4.16 kV, 3 phase, 4 wire, 4 pole, 60 Hz, 0.8 power factor, salient pole brushless AC generator suitable for a safe area
Open drip proof (ODP)
Generator bearing temperature detectors
Class ‘F’ insulation with class ‘B’ temperature rise
Outlet and junction boxes
Line side cubicle including 3 surge capacitors, and 3 lightning arrestors
Neutral cubicle including 11 CT’s (3 for metering, 3 for differential protection, 3 for generator protection, 1 for CCCT, and 1 for NGR)
Electrical Accessories
All on-package electric devices meet or exceed Class 1 Division 2 Group D classification
All on-package control cabling
Junction boxes located on external surfaces of gas turbine generator
Aluminum cable trays
Integral grounding protection
Emergency ‘stop’ push-button on turbine enclosure
Battery Cabinet
Fabricated of painted carbon steel
Suitable for locating in safe area
Lead acid batteries
120 VDC
Request a Quote
✓
Request sent
Thank you, our team will reply to you shortly.
Direct access to our team
Email American Plant & Equipment
Tell us what you want to buy, source, finance, or sell. A machinery specialist will follow up with you.
✓
Thank you. Your request is with the American Plant and Equipment team.
A machinery specialist will follow up with you.
Machinery updates
Subscribe to our email list
Tell us which industries you follow and we will send you the machines that match.
✓
You are on the list.
We will email you when machines that match your interests come in. Unsubscribe from any message.
