Description Condition It is in excellent condition Installed and is in running condition Operation You need moulds in wood or aluminum, no software needed This machine can cut the foam on both sides of the foam plank Dimensions And Floor Space Footprint (w × l): 5,185 mm × 6,010 mm (about 17 ft × 19 ft 9) Overall height: 2,200 mm (≈ 7 ft 3) Floor area for the machine itself: roughly 31 m² (≈ 335 ft²) Motors Three independent a.c. motors drive the only three powered functions on the machine Circulating band-knife: ≈ 11 kW – keeps the 80 mm wide knife moving at cutting speed Servo/gear-motor for feed table: ≈ 3 kW – pushes the template-table under the press belt at 5-25 m min⁻¹ Gear-motor on discharge roller: 0.55-1 kW – lifts and ejects the profiled slab once the stroke finishes All three sum to ≈ 15 kW, matching the catalogue spec Pneumatic compression (6 bar, 90 psi) is supplied by your plant air, so there is no onboard compressor motor A tiny 0.1 kW pair of grinding wheels is belt-pulled from the knife shaft rather than having its own motor SpecificationsCapacity: Maximum height of material to be carved: 220mmWeight: 4900Dimensions: 1980mm x 2200mm table sizeWorking width: 1980mm (78 inches)Opening roller to table: 25/540mmVertical stroke press belt: 0 to 250mm
