Caterpillar, 816B, 1989, Reconditioned, 17330 Hours

Description

  1. Drive Train Rebuild at 15,384 Hours
    1. Servicing Cat dealer rebuilt this Caterpillar 816B including:
    2. Rebuilt the engine
    3. Cam bearings
    4. Cam shaft and followers
    5. Cylinder packs
    6. Fuel injectors
    7. Rebuilt fuel pump
    8. Turbo
    9. Cylinder head
    10. Water pump
    11. Oil pump
    12. All new bearings and seals
    13. Dyno tested engine
    14. Rebuilt the transmission, torque and transfer case including:
    15. Rebearing and resealed all components
    16. Transmission pump
    17. Bench tested once complete
    18. Rebearing and resealed all 4 final drive assemblies
    19. Rebearing and resealed both differential assemblies
    20. Rebearing and resealed rear axle oscillation assembly
    21. Installed new hydraulic pumps
    22. Upgraded radiator from folded core to modular cores
    23. All required hoses and tubes were replaced
    24. Reconditioned cab
  2. Repairs and Services Completed at 17,330 Hours
    1. Upon arrival at our yard, all guards and covers were removed and the machine was power washed
    2. Completed visual and operational inspections
    3. Changed engine oil and filter
    4. Filter was cut open and checked for contaminants - clean
    5. Changed transmission oil and filter, filter cut open and checked - clean
    6. Checked suction screens - good
    7. Changed hydraulic oil and filter, filter checked - clean
    8. Changed fuel filter
    9. Both differential oil levels are good and the oils are clean
    10. All 4 wheel planetary levels good and oils clean
    11. Checked rear axle oscillation - good
    12. Checked center articulation - good
    13. Resealed steering cylinders and installed new pins and bearings
    14. Resealed blade lift cylinder and installed new bearings
    15. Checked all brake lines
    16. Installed new blade mounting caps and bolts
    17. Installed new fan belts
    18. Installed new a/c compressor belt
    19. Repaired rear axle brake system
    20. Rebuilt parking brake (new shoes)
    21. Inspected and greased all u-joints on driveshaft
    22. Checked all gauges, controls, lights and heater
    23. Load tested batteries and checked all connections
    24. Checked all grease lines and greased machine
    25. Checked engine high and low idle
    26. Checked torque converter stall speed
    27. Checked all pressures
    28. Completed all mechanical repairs
    29. Complete machine has been sand blasted, primed, painted and new decals applied
    30. Excellent compactor, ready to work
  3. Specifications
    1. Serial number: 15Z00896