Description Overview Two identical 2100 kW Waukesha generators, new and never installed Fuel type: natural gas Part of a 4.3 MW Waukesha co-generation package Model year: 2004 Unit number: 84160 Generator Specifications Brand: Kato Generator end model: AA27493000 Rated output: 2100 kW / 2625 kVA Rating: continuous duty Voltage: 7200/12470 V or 13.2 kV or 4160 V Frequency: 60 Hz or 50 Hz Phase: three-phase Number of leads: 6 – wye Exciter: PMG Stator winding pitch: 2/3 Enclosure: TEFC – synchronous type Power factor: 0.8 Current: 3 phase 60 hertz RPM: 900 Weight: 36,000 lbs Engine Specifications Manufacturer: Waukesha Model: 12V-AT27GL Fuel: natural gas BHP: 2955 RPM: 900 Heat rate: 9056.4 BTU/kW-hr Fuel rate: 352.19 CFM Horsepower: 2955 @ 900 RPM Cooling system: ATGL jacket water cooling system Weight: 82,000 lbs Length: 297.64 in plus aux skid 64 in Width: 94 in Height: 132 in Overall Dimensions and Weight Overall dimensions: 355 in L x 96 in W x 133 in H Overall weight: 115,000 lbs Control Panel Model 4000 / 24 VDC Exhaust Silencers Two units GT Exhaust model 201-6124 exhaust silencer units Capacity: 32,619 lb/hr Attenuation: 42 dBA reduction @ 250 Hz Weight: 4,000 lbs Heat Exchangers – Chiller Water Service Two units Alfa Laval model M15-BFG plate and frame heat exchangers Capacity: 6,500 MBH/hr Weight: 4,550 lbs Heat Exchangers – Auxiliary Water Service Two units Alfa Laval model TS20-MFG plate and frame heat exchangers Capacity: 2,592 MBH/hr Weight: 2,270 lbs Heat Exchangers – Waste Heat Service Two units Alfa Laval model TS20-MFG plate and frame heat exchangers Capacity: 6,500 MBH/hr Weight: 2,530 lbs Exhaust Heat Recovery Silencer/SCR Units Two units Envirokinetics exhaust heat recovery silencer/SCR unit Capacity: 3,700 MBH/hr Weight: 17,000 lbs Absorption Chiller One unit Trane model ABSD0800H Horizon single-stage absorption chiller Cooling: 781 tons Voltage: 460 volt – 60 hertz Hot water GPM: 1,442 Hot water temp: 250°F to 230°F Chilled water GPM: 1,245 Chilled water temp: 59°F/44°F Shipping weight: 34,843 lbs Generator Ends Two units Kato Engineering Inc. model 8P10.5-4200 2/3 generator Rated output: 2,100 kW / 2625 kVA Voltage: 7199 / 12470 V Power factor: 0.8 Current: 3 phase 60 hertz Exciter: PMG Leads: 6 wire – wye RPM: 900 Enclosure: TEFC Stator winding pitch: 2/3 Weight: 36,000 lbs Controls and Switchgear Square-D cogen controls and switchgear SpecificationsWeight: 52163