Description Overview Goss Community press with 578 mm cut-off Configuration: one 3-color unit, four mono units, one folder Machine is much less than 23 feet wide Width Dimensions Frame base width: approximately 45 to 50 inches (about 4 feet) Overall mechanical width: approximately 7 to 9 feet at the widest point, accounting for drive motors, gearboxes, and control consoles Paper web width: approximately 35 inches Frames add roughly 12 inches to the web width Drive motors and operator consoles extend roughly 2 to 3 feet on each side Length Dimensions Mono unit length: approximately 3 to 4 feet per unit 3-color unit length: approximately 3 to 4 feet (stacked vertically, same floor length as mono unit) Folder length: approximately 4 to 6 feet Total estimated length: approximately 20 to 25 feet (5 units at 15 to 20 feet plus folder at 5 feet) The 23-foot figure refers to the length of the press line, not the width Footprint Description Footprint is a long, narrow rectangle Dimensions represent actual base contact with the floor and physical clearance needed for machinery, excluding working aisles SpecificationsDimensions: 2400x7600mm
