Total length of this machine is 23500 mm (77 feet) (to be corrected and shown in diagram)
With the RS system - will make the top come out flatter
With the side paper (or film) winding system motorized
With side film guiding device
With the bottom paper winding system motorized at end of conveyor prior to the cutter
With Allen-Bradley brand inverters
With a general control panel
With separate control panel of the RS system (rising side)
Including operator walkway on the two sides of the tunnel
With 4 exhausts on the oven top
A CAD diagram will be furnished with the purchase
Specifications
Side conveyors adjustable width: 1000 mm to 2450 mm (96.4)
Fall plate width range is 1230 mm to 2450 mm (side conveyor range is bigger but is limited by the fall plate minimum width)
Total quantity of fall plates: 6
On each fall plate the angle is adjustable
Total length of fall plates is 5380 mm
Speed range on the bottom and side conveyor is 1000 to 6800 mm (client will run at 4000 mm maximum (4 meters) as per his specification)
Operator and control platform length at entry: 3500 mm
Each plate is adjustable up and down and its angle is adjustable up to 6 degrees except the last fall plate which is not adjustable
If foaming by trough, the materials flow directly out from the trough to the pour board. If foaming by spray head, the materials form out of the spray head to the extra platform first then from the platform to the pour board
Capacity: 2300mm maximum width
Fall Plate Dimensions
Plate #1: 1580 mm
Plate #2: 680 mm
Plate #3: 980 mm
Plate #4: 980 mm
Plate #5: 680 mm
Plate #6: 480 mm
Total is 5380 mm
With some gaps the total length is 5400 mm (212.5)
Motor Specifications
Side conveyor running: 1.5 kW / 2 motors
Side conveyors width adjustment: 2.2 kW / 1 motor
Side film/paper rewinding: 0.2 kW / 2 motors
Bottom paper rewinding: 0.75 kW / 1 motor
RS system bar adjustment: 0.2 kW / 2 motors (rising side)
Fall plates vertical up and down movement: 0.4 kW / 7 motors
Fall plates expanding: 0.75 kW / 1 motor
Horizontal (main) conveyor: 4 kW
Exhaust fans on top: 1.5 kW / 4 motors
Total kW is 20.3 = 27.22 horsepower
Request a Quote
✓
Request sent
Thank you, our team will reply to you shortly.
Direct access to our team
Email American Plant & Equipment
Tell us what you want to buy, source, finance, or sell. A machinery specialist will follow up with you.
✓
Thank you. Your request is with the American Plant and Equipment team.
A machinery specialist will follow up with you.
Machinery updates
Subscribe to our email list
Tell us which industries you follow and we will send you the machines that match.
✓
You are on the list.
We will email you when machines that match your interests come in. Unsubscribe from any message.
