Company founded 1975 US-based machinery business experienced in worldwide sales.

+1 (864) 574-0404
Global website

Choose your language

Languages follow BCP 47. Flags and countries are representative context only.

Automatic translation Machine specifications, model codes, and reference numbers should always be confirmed in the original listing.
Menu
Call +1 (864) 574-0404 Email Us

NovaStar, GS131, New, 1,600 mm (63 in) Max Width, 10 m/min, 2 Web Cold Laminating (New)

NovaStar, GS131, New, 1,600 mm (63 in) Max Width, 10 m/min, 2 Web Cold Laminating

Description

  1. Overview
    1. Brand: NovaStar
    2. Model: GS131
    3. Condition: New
    4. Quantity: 1 unit
    5. Laminating and reel to sheet cutting machine, new and built to order.
    6. Two web cold laminating line with delamination units, liner rewinds, shear cross cutter and sheet delivery table.
    7. Maximum working width 1,600 mm (63 in), minimum working width 1,400 mm (55.1 in).
    8. Laminated product weight 160 to 240 gsm (4.7 to 7.1 oz/sq yd).
    9. Working speed 10 m/min (32.8 ft/min).
  2. Specifications
    1. Maximum working width: 1,600 mm (63 in).
    2. Minimum working width: 1,400 mm (55.1 in).
    3. Cutting mechanism: the upper blade rotates, the lower blade is fixed.
    4. Material to be processed, laminated product: 160 to 240 gsm (4.7 to 7.1 oz/sq yd).
    5. Working speed: 10 m/min (32.8 ft/min).
    6. Unwind reel core inner diameter: 3 in (76.2 mm).
    7. Minimum reel/core width: 1,400 mm (55.1 in).
    8. Guide path roll width: 1,700 mm (66.9 in).
    9. Delivery table length: 2,600 mm (102.4 in).
    10. Electrical supply, three phase: 480 V (plus or minus 5 percent).
    11. Electrical supply, single phase: 230 V (plus or minus 10 percent).
    12. Main line frequency: 60 Hz (plus or minus 1 Hz).
    13. Compressed air: minimum 6 bar (87 psi), non lubricated, dry and filtered.
    14. Maximum altitude: 1,000 m (3,281 ft) above sea level.
    15. Optional build in compliance and accordance with CE directives and EU safety standards.
    16. Dimensions: 18 ft (5,486 mm) long x 8 ft (2,438 mm) wide
  3. Unwinding, Lamination and Cutting Units
    1. 2 x unwinder station: stress relieved and machined steel side frames connected by cross beams; air shaft for 3 in (76.2 mm) core inner diameter; pneumatic brake assembly mounted on one side of the unit.
    2. Automatic closed loop web tension control by load cells, with tension display.
    3. Digital edge web guide system with automatic detection, tracking and adjustment; ultrasonic sensor; manual sensor positioning; digital command station with touchscreen operating panel.
    4. Adjustable roll for slack web correction; guide path roll of 1,700 mm (66.9 in) width.
    5. 2 x delamination unit, each with 1 delamination and stripper roll.
    6. 2 x motor driven rewind unit for the release film and the paper backing: stress relieved and machined steel side frames; air shaft for 3 in (76.2 mm) core inner diameter.
    7. Lamination unit: 1 chromed steel roller and 1 rubber nip roller; nip roller movement pneumatically controlled with pressure adjustment on both sides; motor driven; guide path roll of 1,700 mm (66.9 in) width.
    8. Shear cutting unit: rotating upper blade over a fixed lower blade, cutting without burrs; 1 bottom cutter plate; rotary cutter driven by a servo motor with variable speed drive; gearbox for the servo motor; safety cover above the rotary blade.
    9. Delivery platform: structure fabricated from channel, angle and plate; pneumatic up and down plate; collection table for the finished material; adjustable stopper for the arriving sheets; table length 2,600 mm (102.4 in).
  4. Controls and Electrics
    1. Main cabinet carrying all variable speed drives.
    2. Operator control cabinet at the cutting unit with a 7 in (177.8 mm) touch panel (HMI) carrying all machine operating parameters.
    3. Touch panel functions: unwind tension control, sheet cut length in mm, number of sheets per packet or bundle with a beep alarm for the operator, nip roller movement and pressure control, emergency stop.
    4. Stop modes: emergency stop, normal stop and a pre-set number of cutting strokes.
    5. Servo driven rotary knife; cutting length and the total number of finished products are entered and displayed on the touch screen.
    6. Complete pre-wiring of the machine components up to the operator control cabinets, with cabling run in cable trays.
    7. Local controls mounted near their relevant units and assemblies for easy operation.
  5. Major Bought-In Components
    1. Web guide unit: BST or E+L.
    2. Pneumatic brake: Re (Italy) or Renova.
    3. Load cell: Re, E+L or Mitsubishi.
    4. AC induction motors: Siemens.
    5. AC servo motor: Siemens, Fukuta or Mitsubishi.
    6. Digital AC drives: Control Technique or Siemens.
    7. Touch screen (HMI): Siemens or Weintek.
    8. Bearings: NTN or FAG.
    9. Pneumatics: Festo, Pneumax or SMC.
  6. Delivery
    1. Ready for trials and delivery within 6 months from receipt of the countersigned order confirmation.