WN375 make ring twister machine with 8.5" ring dia x 96 spindles (48 + 48 both side) and pneumatic auto stop mechanism.
Model: WN375.
Number of spindles: 96 spindles.
Specifications
Gauge: (10") 254 mm (10.0 in).
Ring dia.: 215.9 mm (8.5 in) x 25.4 mm (1 in) height; 203.2 mm (8 in) rings available on request.
Traverse of ring bar: 355.6 mm (14.0 in) (14").
Twist range: 75 to 300 turn per meter (2 TPI to 7.5 TPI).
Builder: reduction gear box with gear motor for milk bottle shape wind on double flange bobbin.
Rings and lubrication: self lubricated ring mounted on aluminum ring holders continuously provided with oil with ABC hard chrome plated ring.
Feeding device (feeding roller): consisting of 2 lines of continuous type hardchrome plated steel rollers mounted on ball bearing.
Top rollers (rubber roller): heavy hardened rubber mounted top rollers with cradle arrangement and pneumatic auto stop motion mechanism.
Separators: full length easily removable steel powder coated mounting on spindle rail.
Main drive: constant speed, through V-belts and pulley from main motor on 45 mm (1.8 in) dia. driving shaft.
Head stock: PLC type head stock.
Twist changing: by feeding your TPM / TPI in HMI unit.
Spindle drive: slip-free four spindle drive by tape from 10" dia. aluminum pulley mounted on self-aligning heavy duty ball bearing shafts.
Spindle: "WN375" make heavy duty dynamically balanced with suitable HZ-68 spindle with imported German make bolster, hylame clutch wheel with suitable to pneumatic auto stop mechanisms.
Main structure: M S section powder coated.
Creel: machine mounted porcupine type creel suitable for ply cable twisting (side mountain creel on costumer scope).
Yarn delivery: yarn is routed from the creel through the tension guide rod and auto stop motion, then passed sequentially through the back bottom roller, over the top roller, under the front bottom roller, further guided via the lappet hook and finally wound the bobbin.
Air: dry air requires with 5 to 8 bar (116 psi) pressure (compressor – 7.5 hp/10 hp x tank size – 200 to 250 LTRS. capacity).
Machine size (in feet): 46 length x 14.5 width (with outside creel) x 7.5 height (approx.).
