Conventional and precision solutions for ring twisting
Specifications
No. of spindles: 72 spindles
Gauge: 11 in (279.4 mm (11 in))
Ring dia.: 228.6 mm (9 in)
Traverse of ring bar: 355.6 mm (14 in)
Twist range: 75 to 300 turn per meter (2 TPI to 7.5 TPI)
Builder: reduction gear box with gear motor for parallel or milk bottle shape wind on double flange bobbin
Rings and lubrication: self lubricated ring mounted on aluminum ring holders continuously provided with oil
Feeding device (feeding roller): 2 lines of continuous type hardchrome plated steel rollers mounted on ball bearing
Top rollers (rubber roller): heavy hardened rubber mounted top rollers with cradle arrangement and pneumatic auto stop motion mechanism
Separators: full length easily removable steel powder coated mounting on spindle rail
Main drive: constant speed, through V-belts and pulley from main motor on 45 mm (1.8 in) dia. driving shaft
Head stock: PLC type head stock
Twist changing: by feeding your TPM / TPI in HMI unit
Spindle drive: slip-free four spindle drive by tape from 10 in dia. aluminum pulley mounted on self-aligning heavy duty ball bearing shafts
Spindle: WN375 make heavy duty dynamically balanced with suitable HZ-77 inserts, hylame clutch wheel with suitable to pneumatic auto stop mechanisms
Main structure: M S section powder coated
Creel: machine mounted porcupine type creel suitable for ply cable twisting (side mountain creel on customer scope)
Yarn delivery: yarn is routed from the creel through the tension guide rod and auto stop motion, then passed sequentially through the back bottom roller, over the top roller, under the front bottom roller, further guided via the lappet hook and finally wound the bobbin
Air: dry air requires with 5 to 8 bar (116 psi) pressure (compressor – 5 hp/7.5 hp x tank size - 100 to 150 LTRS. capacity)
Machine size (in feet): approx. 43 length x 4.5 width x 7.5 height (approx.)
