Description Overview Production line speed: 200 pieces per minute design speed Product size: 560 x 210 mm Pet pad: 560 x 210 size, 10 pieces/bag Technical Specifications Packing speed: 35 to 40 bags/minute (based on normal PE poly material) Packing range for bag length: 80 to 200 mm Packing range for bag width: 80 to 200 mm Packing range for bag height: 90 to 300 mm Tube bag material: PE Bag style: side gussets bag Bag thickness: more than 50 microns Power supply: 380 volts, 3 phase, +/-5%, 50 Hz or 220 volts 50/60 Hz Installation capacity: 30 kW Pneumatic system: 0.8 MPa Air consumption: 0.5 m³/minute Machine overall length: 7200 mm Machine overall width: 1200 mm Machine overall height: 2500 mm Weight: 4000 kg Machine color: white (customized color also acceptable) Noise: ≤80 dBA Safety Features Machine has sensor limit on all servo motor movement position which can protect the machine from improper operation (sensor: Keyence, Omron) Different level password setting in HMI which can clarify the responsibility to worker staff and then protect the machine (HMI, Mitsubishi) Wrong product feeding alarm function Safety door alarm system will protect worker whenever door is open Emergency button in different positions to ensure fast action against emergency situations Virtual Cam Control Program Best virtual cam program which can make the machine run more stable, durable and keep the machine run in less vibration Detail remark and design in all HMI and program Two mode condition control system separately for testing machine and run the machine, which can make all learning and teaching much easier Recipe available for different package size, easy to be selected HMI: for easy operation, set parameters in the operating panel, easy change for different product size Sealing Advantage Independent voltage control system makes the sealing temperature adjustable separately Other Features Sensor alarm for tube roll storage Machine will run only after product is fed into “product infeed position” and detected by sensor Online bag making system can save more money on pre-made transportation and material management Corrector to guarantee the poly tube transfer in the same central line Bag bottom sealing device is easy to adjust and maintain Sensor control system guarantee the bag transfer in the right measurement Oil free chain for machine system Easy change over Mechanical Units Infeed unit: transfer pad into the sealing position; adjust distance to match different size package Lifting unit: lift the pad at the pushing position; compress pad to ensure pad is of good condition before pushing Pushing unit: push the pad through the mould to the sealing position; suction to make the seal Rotating unit: turn the bag to the sealing position; assist the pad into the bag Sealing unit: sealing of the bag and cuts the trim Open bag unit: transfer the bag to the mould; pre-open the bag; mould change adjustment Finish package transfer unit: discharge position has different position plates which ensure good sealing; transfer the sealed package to next position Final bag cut unit: works based on color mark on the tube, and makes exact required bag Perforate unit: making the perforated line to easily open the bag and get the pad
