Main specifications: production rate 300 kg/h; working width 1600 mm; suitable fiber length 76 mm, suitable for all kinds of cotton, wool, chemical fiber, glass fiber, etc.; weigh weight 0.3 to 1.2 kg; weighing accuracy 2 to 4%; opening frequency 2 to 4 times/minute; compressed air required: air volume 0.8 m³/h, air pressure 8-10 kg/cm².
Main performance: this machine is suitable for all kinds of fibers; can be weighed according to the ratio of products to ensure the accurate ratio of different raw materials.
Main structural characteristics: reliable photoelectric control to ensure uniform and continuous feeding; use frequency conversion motor drive angle nail curtain, feed quantity adjustment is convenient; weights can be set as needed, easy to adjust; pneumatic switchgear mechanism, automatically feed according to the program requirements; automatic error compensation; automatic accumulation of production; all cotton roller is controlled by frequency conversion motor.
Pre-Opener
Main specifications: working width 1600 mm; machined fiber 6 to 20 D, 38 to 76 mm; installed power 9.7 kW.
Main functions: after opening the charter plane, the raw materials are sent to the machine through the conveyor curtain; after the initial loosening, comb and removal, the bulk, coiled and compacted fibers are initially loose, straightened and sent to the next process.
Main structural characteristics: use a comb needle beater to effectively protect the fiber from damage; equipped with traffic jam alarm parking device, emergency parking device, reversing mechanism, the whole machine is safe and reliable; using frequency conversion motor transmission, the feed amount can be automatically adjusted with the requirements of the whole production line; with a conveyor long curtain, do not need another conveyor.
Large Chamber Mixer
Main specifications: production rate (highest) 650 kg/h; working width 2500 mm; maximum cotton storage amount 30 m³; installed power 12 kW; machined fiber 1 to 20 D, length of 76 mm.
Main performance: this machine is a uniform mixture of different fibers after coarse opening; its principle is after a preliminary loose raw material, under the certain pressure and speed of the wind carry, through the cotton pipeline, into the top of the cyclone head, cyclone head will raw material large area, evenly spread on the flat curtain, raw material is layered in large warehouse, corner nail curtain is vertical grab raw material, into the machine, in order to achieve the purpose of uniform mixing of different fibers.
Main structural characteristics: flat curtain and angle nail curtain frequency conversion speed adjustment to meet different production requirements; can automatically adjust the amount of cotton feeding according to the requirements of the front machine table; multiple photoelectric detection of the whole machine, control the cotton storage level, ensure uniform mixing of raw materials and reliable operation of the machine; the whole machine plate combination, easy for installation and transportation.
Fine Opener
Main specifications: working width 1600 mm; machined fiber 6 to 20 D, length of 38 to 76 mm; installed power 9.7 kW.
Main functions: after the raw materials are fully mixed by the cotton mixing machine, they are fed to the machine, fully loosened and precombed in the machine, so that the fiber is further loosened and straightened, and fed to the next process through the fan.
Main structural characteristics: open the fiber effectively by a beater coated with metal needles; equipped with traffic jam alarm parking device, emergency parking device, reversing mechanism, the whole machine is safe and reliable; using frequency conversion motor transmission, the feed amount can be automatically adjusted with the requirements of the whole production line.
Carding Machine and Crosslapper Unit
Vibre Chute Feeder
Main specifications: production 400 kg/h; picture 2500 mm; scope of application 1.5 to 20 D, 25 to 75 mm; installed power 10 kW.
Main performance: this machine is nonwovens carding machine feeding device, fiber after clearing procedures before the treatment, by losing cotton fan into the upper storage box, the formation of a certain density of fibrous tissue, and then by a pair of feed roller feeding at the bottom of the opening roller for opening, fiber to the box, and under the effect of uniform pressure and vibration plate, the formation of uniform fiber layer, send the output by a pair of roller, through the conveyor belt feeding carding machine or autoleveller device.
Main structural features: compressed air system to ensure a more uniform and stable output of cotton layer; large capacity built-in fan controlled by frequency conversion to ensure the lateral uniformity of output cotton layer; according to the output requirements, the thickness of the lower cotton box can be adjusted between 50-125 mm; with cotton output section contour adjustment device, through the adjustment plate can be arbitrarily set the required shape, to ensure the horizontal uniformity of the output cotton layer.
The cotton feeding channel is made of stainless steel.
Belt Weighting System
Main specification: working width 2500 mm; weigh accuracy ± 3%; weight of control fiber layer 500 to 1500 g/m²; installed power 0.45 kW.
Main performance: the fiber layer output from the cotton box should be accurately weighed, and the speed of the feeding machine should be automatically adjusted according to the key weight of each weight to ensure that the fiber amount of the feeding machine is uniform and stable; production gram (gsm) can preset the production line to automatically configure the parameters required for output.
Main structural characteristics: incorporate the automatic control system; belt-type weighing; increase the cotton mesh weight and super difference alarm.
High Speed Carding Machine
Main specifications: working width 2500 mm; output speed (maximum) 120 meters per minute; net weight 16 to 50 gsm; scope of application 1.5 to 5 D, 25 to 75 mm; output mode double output; installed power 54.6 kW.
Main performance: the machine is suitable for chemical fiber, wool, cotton, and the mixed raw material, the fiber crimp state mass of carding basic straight into a state of single fiber, remove a small amount of impurities in the feed and linter, and through the clutter of native device after combing the basic straight and parallel arrangement to fiber in fabric forming process, forming longitudinal and has certain strength ratio of fiber network.
Main structural features: a reliable device to prevent feeding metal objects, protect the needle cloth from damage; there are eight carding points in the whole machine, and the carding force of each point is strengthened successively, and the carding effect is good; with double doffer, double disorderly out of the net device; high machining accuracy, radial runout and straightness of cylinder surface are controlled within 0.02 mm, reaching the international advanced level; automatic control system.
Request a Quote
✓
Request sent
Thank you, our team will reply to you shortly.
Direct access to our team
Email American Plant & Equipment
Tell us what you want to buy, source, finance, or sell. A machinery specialist will follow up with you.
✓
Thank you. Your request is with the American Plant and Equipment team.
A machinery specialist will follow up with you.
Machinery updates
Subscribe to our email list
Tell us which industries you follow and we will send you the machines that match.
✓
You are on the list.
We will email you when machines that match your interests come in. Unsubscribe from any message.
