Description Overview Resin: Pet/pa6 pellets Diameter: 0.18 to 2 mm Output: 100 kg/h Operating direction: Left to right / right to left Color finish: Ral 7035 light gray, structure ral 5002 Client's main voltage: 3 x 480 v, 50 hz, 3 phases with neutral wire Technical Specifications Working height: 1100 mm Working width: 600 mm Diameter range: 0.18～2 mm Winding positions: 168 units Number of monofilaments: Up to 160 units Extrusion Line Included Components Extrusion group Spin pump group Spin head group Quench tank Slow stretching draw stand Hot water stretching tank Water removal unit Fast stretching draw stand 1 Hot air stretching oven Fast stretching draw stand 2 Antistatic bar group Relaxing oven (2 units) Haul-off draw stand Spin finish unit Fully computerized control system Test run at facilities Technical documentation Packing for the extrusion line Erection & commissioning Options Material handling group for pet flakes/pellets Screen changer filter Laboratory equipment: Tension & elongation testing machine Laboratory equipment: Hot-air oven for shrinkage testing Auxiliary equipment: Vacuum burner for spin pack/candle filter Auxiliary equipment: Ultrasonic cleaning bath for spinneret/candle filter Auxiliary equipment: Preheater for spin pack Extruder Group Single-screw extruder, the group includes: Steel frame for mounting the gearbox, motor, and barrel Ac motor for extruder with inverter Pressure control transducer for melt at the exit point Temperature control transducer for melt at the exit point High-tenacity nitrided steel screw High-tenacity nitrided steel barrel Armored heating elements Feed zone prepared for cooling-liquid recirculation Cemented and hardened steel helical gears for gearbox Emergency stop button Screw extraction tool Screw for processing pet/pa6 pellets Output up to 105 kg/h pet (iv 0.7~1.2) at approx. 75 rpm extruder screw speed; up to 85 kg/h pa6 (iv 3.2~4.4) at approx. 60 rpm extruder screw speed Diameter (mm): 75 L/d ratio: 30 Max. rpm: 70 Total heating power (kw): 33 Ac motor (kw): 30 Adapter Adapter between extruder and spin head Made of tool steel Temperature probe Electrically heated Threads for melt temperature or melt pressure probes Spin Head Group Single spin head for monofilaments, round version Made of tool steel Electric heating for die holder, wall with suitable thickness for better tolerance Temperature probes for each heating zone Electrically heated Die pack components made of tool steel: 2 units die holder, 2 units die-pack body, 2 units breaker plate Tool-steel dies for one dimension, total 2 units Round dies with Ø 212 mm For up to 160 monofilaments (number depends on monofilament diameter) Die removal tool for removing the die and die pack Hydraulic lifting table Steel frame to hold the die pack Die diameter (mm): 212 Heating capacity (kw): 16 Thermal regulation zones (qty): 6 Pressure reading range (bar): 350 Number of monofilaments (qty): 160 Spin Pump Suitable for processing pa/pet resin With 1 drive shaft and 1 driven pulley Made of tool steel Seal at drive shaft Spin-pump rack connected to the extruder frame for fast and easy installation Ac drive with encoder Geared motor Safety clutch with safety pin Heating module Volume (ccm/rev.): 40 Ac drive (kw): 4 Rpm: 4 to 45 Quench Tank For cooling pa/pet filaments Tank dimensions: L x W x H 1620 x 850 x 750 Tank and pipes made of stainless steel Motor-driven vertical adjustment of the tank Vertical adjustment: approx. 200 mm Horizontally movable Foam table with sponge holder Filament guides inside the tank Mounted on rails Central water supply Useful width (mm): 800 Lifting motor (w): 750 Heaters (kw): 2 x 9 = 18
