AA-1181 CENTRIFUGAL EXTRACTOR–1250mm/1500mm DIAMETER

REFERENCE NUMBER: AA-1181 CENTRIFUGAL EXTRACTOR–1250mm/1500mm DIAMETER THIS CENTRIFUGAL EXTRACTOR IS USED TO PREDRY ALL KINDS OF FIBERS AFTER DYEING, HAS A MODULAR STRUCTURE TECHNICIAL SPECIFICATIONS: 1. BASKET DIAMETER: Ø500 TO Ø1800 mm 2. BASKET DEPTH: 750 mm 3. ROLLING BASKET: AISI304L STAINLESS PERFORATED STEEL 4. EXTERNAL BASKET: AISI304L STAINLESS STEEL 5. BASKET THICKNESS: 4mm 6. OUTER BASKET THICKNESS: 4mm 7. DRIVE MOTOR: 22 KW/H SPEED 1500 RPM 8. STRENGTH CIRCLE (USED TO INCREASE THE STRENGTH OF THE INNER BASKET (ROTATING PART) : 20 x 20 AISI304L STAINLESS PLATE (4 PIECES) 9. BEARING BLOCK: 3 PIECES, SKF/FAG BEARING 10. SPEED CONTROL: INVERTER CONTROL 11. BREAKING: INVERTER CONTROL EXTERNAL BREAKING SYSTEM MACHINE DESCRIPTION: 1. THIS MACHINE RESTS ON HARDENED SWING JOINTS AND STEEL SPRINGS ON THREE LEGS 2. INCORPORATES TWO MECHANICAL AND DYNAMIC BALANCE SWITCHES. IF THE UNBALANCE OCCURS, THE MACHINE REDUCES ITS SPEED AND GIVES AN ALARM 3. WHEN MACHINE IS LOADED, THE COVER CAN BE OPENED AND CLOSED MANUALLY 4. IT BRAKES AUTOMATICALLY AFTER SQUEEZING AND THE COVER IS OPENED PNEUMATICALLY 5. THE WORKING TIME OF THE MACHINE CAN BE ADJUSTED TO THE DESIRED VALUES FROM THE CONTROL PANEL 6. MACHINE OPERATION PERFORMS THE OPERATIONS FULLY AUTOMATICALLY, EQUIPPED WITH VARIOUS OPERATOR ALERTS 7. CONTROL PANEL IS MADE OF GROUND STAINLESS STEEL 8. EXTERNAL BASKET IS MADE OF STAINLESS STEEL. IT CAN BE MOUNTED AND DISASSEMBLED ON THE BOTTOM TABLE 9. INNER BASKET IS MADE OF STAINLESS-STEEL MATERIAL, THAT IS DRILLED IN SUITABLE DIAMETER AND PITCHES 10. MACHINE LEGS: THE LEGS ON WHICH THE MACHINE BODY IS MOUNTED ARE SUSPENDED WITH SPECIALLY DESIGNED SPRINGS AND HAVE THE ABILITY TO ABSORB THE VIBRATIONS THAT OCCUR. FOOT SHAFT AND MATERIALS ARE MADE OF SPECIALLY PROCESSED HIGH STRENGTH STEEL 11. COVERS: MADE OF STAINLESS STEEL. THEY AUTOMATICALLY OPEN AND CLOSE WITH A PNEUMATIC PISTON. THE MACHINE CANNOT OPERATE UNLESS THE COVER IS CLOSED AND THE COVER CANNOT BE OPENED BEFORE THE MACHINE STOPS 12. SAFETY SYSTEMS: IT HAS A VIBRATION SENSOR AND A SAFETY SYSTEM TO PREVENT EXCESSIVE VIBRATIONS 13.ELECTRO PNEUMATIC CONTROL PANEL CONSISTS OF: -POWER CONTROL EQUIPMENT WITH MOTOR PROTECTION BY MAGNETO-THERMAL SWITCHES; -LOW-POWER AUXILIARY CIRCUITS; -ELECTRO VALVES AND PNEUMATIC CONTROL APPARATUS; -THE CONSTRUCTION IS MADE OF STAINLESS STEEL; -PROCESS CONTROL AND BUTTONS, SIGNALING LAMPS AND SUMMARY DISPLAY