Search results for: 'Winder machine sem'

REFERENCE NUMBER: A-1243 (0101GHBXX12) A MACHINERY AND EXTRUSION RELATED MACHINES REFERENCE #102: 1 BARMAG EXTRUDER DIA. 90 WITH CONTROL PANEL REFERENCE #103: 4 BARMAG EXTRUDERS 28 MM REFERENCE #104: 1 PLASTICIZERS EXTRUDER 40 MM REFERENCE #105: 1 PLASTICISERS EXTRUDER 20 MM REFERENCE #108: 1 NYLON POLYMER DRYER REFERENCE #110: 50 SAHM WINDERS TRAVERSE 200 MM X CORE 35 MM REFERENCE #111: 32 SAHM WINDERS – TRAVERSE 200MM X CORE 35 MM REFERENCE #113: 31 LEESONA WINDERS – TYPE 969 – TRAVERSE 300 MM REFERENCE #114: 9 SAHM WINDERS TYPE 280 – TRAVERSE 300 MM + PANEL REFERENCE #119: 1 OVEN - BARMAG LONG 3000 MM X ENTRANCE 1400 MM REFERENCE #127: 1 SETS OF GODETS 7 ROLLERS – 1150 MM X 200 MM DIA – 2 HEATED ROLLERS AND 1 CHILLED ROLLER + OIL HEATER - BARMAG REFERENCE #129: 1 SET OF GODETS 3 ROLLERS – 1150 X 200 MM DIA - BARMAG REFERENCE #131: NEW PARTS OF A RECYCLING LINE – DIA 120 MM – NEW SCREW – WITH SPAGHETTI DIE – + DAVID BROWN GEARBOX FOR A 150 HP MOTOR REFERENCE #132: 1 LABORATORIUM LDPE “PLASTICIZERS” – EXTRUDER 20MM REFERENCE #134: 1 SEMI-AUTOMATIC BALING-PRESS, PRESSURE 60 TONS, AUTEFA REFERENCE #134B: 1 HORIZONTAL PRESS REFERENCE #137: 1 NEUMAG STAPLE FIBRE CRIMPER – ENTRANCE 80 MM REFERENCE #139: 1 NEUMAG WITRAS 6008R FOR 8 ENDS – ALMOST NEW, ONLY USED FOR A FEW MONTHS YEAR 2000 REFERENCE #142: OIL HEATERS REFERENCE #143: INOX WATERBATH – WIDTH 1200 MM REFERENCE #144: INOX WATERBATH – WIDTH 750 MM REFERENCE #146: SEVERAL SAHM WINDERS FOR CF YARN REFERENCE #147: SEVERAL BARMAG SPINNZWIRN LFW 25 WINDERS REFERENCE #148: STAPLE FIBER CUTTER – TYPE LUMMUS –WITH 2 CUTTER REELS WITH KNIVES REFERENCE #152: 1 SCREENCHANGER – AUTOSCREEN - WAS FITTED ON A 45 MM EXTRUDER REFERENCE #153: SEVERAL FLAT TAPE DIES – 800 MM WIDTH – REFERENCE #164: 2 FANS WITH MOTORS OF ABOUT 12 KW REFERENCE #165: 1 SPAGHETTI DIE REFERENCE #167: 36 SAHM FLANGE WINDERS – TYPE 211 + PANEL QUANTITY AVAILABLE: 35 Learn More

J-2628 COMPLETE BIAS BINDING SYSTEM (SEWING, SLITTING & WINDING SYSTEM) – NEW SEWING MACHINE FOLDS FABRIC, STITCHES EDGE OF FABRIC FOR TWILL EFFECT WORKS TOGETHER WITH WINDING MACHINE AND STRIP CUTTING MACHINE WINDING MACHINE OPENS PREVIOUSLY FORMED TUBE MATERIAL, SPIRALLY, IN THE BIAS, AND REWINDS A SINGLE PLY ROLL, AT BOTTOM OF MACHINE THERE IS A KNIFE TO CUT SEWING FABRIC SEPARATELY, PREPARED FOR THE SLITTER SLITTER MACHINE HAS MANUAL, SEMI-AUTOMATIC AND FULLY AUTOMATIC MODES. WILL SLIT ANY TYPE OF MATERIAL ON THE ROLL (OPEN KNITS, WOVEN FABRIC, LEATHER, POLYESTER, SOME PAPER PRODUCTS, NONWOVEN, ETC) QUANTITY: 1 SLITTER, 1 WINDER Learn More

BRUCKNER BOPP EXTRUSION LINE, WIDTH 8200mm, THREE LAYERS, BUILT 1992, COMPLETED WITH AN ATLAS SLITTER/REWINDER, MODEL CW, WIDTH 8200mm. AND FURTHER AUXILIARIES, INCLUDING SPARE PARTS. NAMEPLATE CAPACITY 20,000 T/Y. RAW MATERIALS SECTION - 4 SILOS 250 M3 ALUMINIUM - 2 SILOS 100 M3 ALUMINIUM - 2 SILOS 50 M3 ALUMINIUM - PNEUMATIC TRANSPORT SYSTEM; COMPUTERIZED DOSING SYSTEM, HOPPERS AND SCALES FOR THE THREE EXTRUDERS EXTRUSION SECTION - MAIN EXTRUDERS: 2 MITSUBISHI CASCADE EXTRUDERS Ø 300 mm AND 250 mm - CO-EXTRUDERS: 2 BANDERA EXTRUDERS Ø 100 mm, EQUIPPED WITH MELT PIPES - DIE: SIMPLAST, WIDTH 1,140 mm, GAP 2 - 3.75 mm, 40 PUSH/PULL BOLTS - CHILL ROLL: Ø 3 M, 1,900,000 KJ/H COOLING CAPACITY - WATER BATH: 1.500.000 KJ/H CAPACITY MDO (MACHINE DIRECTION ORIENTATION) SECTION - PREHEATING INFRARED 130 KW - PREHEATING: 16 CHROMIUM PLATED ROLLS Ø 614 mm - STRETCHING: 6 CHROMIUM PLATED ROLLS Ø 180 mm, EQUIPPED WITH RUBBER NIP ROLLS Ø 150 mm - ANNEALING: 2 CHROMIUM PLATED ROLLS Ø 614 mm TDO (TRANSVERSE DIRECTION ORIENTATION) SECTION - TOTAL LENGTH: 66 METER - PREHEATING: 5 SECTIONS - STRETCHING : 5 SECTIONS - ANNEALING : 5 SECTIONS - NEUTRAL : 1 SECTION - COOLING : 2 SECTIONS - INLET 850 – 1,050 mm WIDTH - OUTLET 7,600 – 8,600 mm WIDTH PRS (PULL ROLL STAND) SECTION - EDGE TRIM CUTTERS - ESSECI FLAME TREATER, BURNER, CHROMIUM PLATE ROLL, RUBBER NIP ROLL - CORONA TREATER 1: 3 DISCHARGE BARS, SILICON ROLL, RUBBER NIP ROLL - CORONA TREATER 2: 2 DISCHARGE BARS, EDGE BAR, SILICON ROLL, RUNNER NIP ROLL MEASUREX/HONEYWELL GAUGE CONTROL SYSTEMS - 8.5 M SCANNER FOR FILM - 1.2 M SCANNER FOR CAST SHEET - MAIN THICKNESS CONTROL UNIT CONNECTED TO THE BOLT OF THE EXTRUSION DIE FOR LIP ADJUSTMENT WINDER - 2 TURRETS KAMPF WINDER - AUTOMATIC CUT / TURRET / MILL-ROLL CHANGE - WINDING CORES: 108 STEEL WINDING CORES Ø 500 mm CONTROL UNIT - THE LINE IS EQUIPPED WITH A FULLY INTEGRATED CONTROL SYSTEM SUPPLIED BY BRUCKNER MILL ROLL STAND (SEMI-FINISHED PRODUCTS WAREHOUSE) - 150 TOTAL POSITIONS, OF WHICH 50 IN HEATED CLOSED ROOM - 1 PICK-UP FOR LOADING / UNLOADING WINDER AND SLITTER - 1 MANUAL EMERGENCY PICK-UP FOR LOADING/UNLOADING WI NDER AND SLITTER AND MAINTENANCE - 1 SHUTTLE TO MOVE MILL ROLLS IN AND OUT OF THE WAREHOUSE - 1 MAIN CRANE FOR MOVING MILL ROLLS / EMPTY CORES RECYCLING - HERBOLD GRINDER FOR SCRAP RECOVERY - 4 FLUFF SILOS - 1 EREMA MACHINE FOR REGRANULATION, APPROX. 700 KG/H SLITTER - ATLAS CW MACHINE, BUILT 1992, MAJOR UPGRADE 2010 - INLET MILL-ROLLS MAX Ø 1.2 M, WIDTH 8.2 M - 16 REWINDING STATIONS, WIDTHS FROM 400 mm TO 2450 mm, MAX Ø 1,000 mm - AUTOMATIC KNIVES AND RE-WINDING ARMS POSITIONING PACKING - SEMI-AUTOMATIC BALLOTTI LINE FOR CONDITIONING OF ROLLS AND PALLETS, BUILT 2000 - CONVEYORS - SCALING - STRAPPING - STRETCHING UTILITIES - 3 COMPRESSORS 3 BARS FOR COMPRESSED AIR CIRCUIT FOR RAW MATERIALS HANDLING - 2 COMPRESSORS 6 BARS FOR COMPRESSED AIR - 2 CHILLERS FOR CHILLED WATER PRODUCTION - 2 WATER COOLING TOWERS - 1 BOILER FOR THERMAL OIL PRODUCTION - 3 TRANSFORMERS 15 KV TO 380 V ADDITIONAL EQUIPMENT - SPARE PARTS FOR ALL OF THE ABOVE - TECHNICAL CONSUMABLES - IT EQUIPMENT FOR CONTROLLING THE MANUFACTURING EQUIPMENT AND DATA TRAFFIC, SUCH AS SERVERS, SWITCHES AND CABLING - LABORATORY EQUIPMENT FOR QUALITY CONTROL PURPOSES Line was producing 20 to 40 microns , line can produce down to 10 to 12 microns Learn More

REFERENCE NUMBER: YY-1365 CONTINUOUS PRODUCTION LINE FOR IMPREGNATION, DRYING, ABRASIVE SPRAY, HEAT-SETTING OF SYNTHETIC FIBERS FOR ABRASIVE WADDINGS, WITH AIRLAY CARDING MACHINE AND FIBER PREPARATION DETAILS: MAIN FEATURES: - THREE LAYERS OVEN: TWO UPPER DRYING LAYERS WITH LENGTH OF 6+ 6 METERS; ONE LOWER CURING LAYER WITH A LENGTH OF 6 METERS; - HEATING: BY DIRECT HEATING WITH AUTOMATIC BURNERS; - CONVEYOR WIDTH: 2200mm; - WORKING WIDTH: 2000mm; - MAX DRYING AND POLYMERISATION TEMPERATURE: 230°C; - HEATING POWER: 4 BURNERS 350 KW EACH ONE, ABOUT TOTAL 1.400 KW; - VENTILATION: SEMI-CLOSED SYSTEM WITH 4 CENTRIFUGAL VENTILATORS; - ADJUSTABLE CONVEYOR SPEED BY A.C. MOTORS; - INSTALLED ELECTRIC POWER: 200 KW. APPROX.; - MECHANICAL SPEED: 2÷15 METERS PER MINUTE; - CONVEYOR DRIVING: BY A.C. MOTORS; - MANUFACTURED ARTICLE: SYNTHETIC FIBERS ABRASIVE WADDING. Learn More

T-9752 KARL MAYER CARBON MACHINES BIAXIAL AND MULTIAXIAL PROPERTIES: SINCE ALL FIBERS POINT IN ONE DIRECTION, THE SCRIM CAN BE IDEALLY DRAPED GOOD SOAKABILITY WITH LITTLE RESIN CONSUMPTION CAN BE DRAPED VERY WELL AROUND CURVES AND EDGES EASY TO CUT ELECTRICALLY CONDUCTIVE, INFUSIBLE HIGH STRENGTH AND RIGIDITY DUE TO GRAPHITE-LIKE FIBER STRUCTURE BIOCOMPATIBLE TRANSPARENT TO X-RAYS LOW SPECIFIC WEIGHT IDEAL FOR SURFACE USE (LITTLE FIBER IMPRINTS) IDEAL FOR PROCESSING WITH EPOXY RESIN! TEXTILE SEMI-FINISHED PRODUCTS MADE OF PRE-SPREAD AND PLANE-PARALLEL LAID FIBERS FORM THE GROUP OF UNIDIRECTIONAL FABRICS. THE FIBERS ARE USUALLY LAID AT 0°, MORE RARELY AT 90°. BY LAYING THE UD FABRICS ALONG THE LINES OF FORCE ACTING IN THE COMPONENT, THE LIGHTWEIGHT POTENTIAL OF THE CARBON FIBER IS OPTIMALLY EXPLOITED. UD FABRICS CONSIST OF ONE OR MORE SUPERIMPOSED FIBER LAYERS FIXED WITH AN EPOXY-COMPATIBLE BINDER THREAD. THE SPECIAL SPREADING TECHNIQUE PRODUCES FABRICS WITH HIGH FIBER PARALLELISM, WITHOUT KNOTS AND FIBER TWIST. SPREAD FIBERS ABSORB THE RESIN BETTER, RESULTING IN HIGHEST LAMINATE STRENGTHS. QUANTITY: 3 LINES Learn More

TT-7540 LAEM-IMS-GOEBEL SLITTER-REWINDER, 1400mm, YEAR 2007 1. BRAND: LAEM/IMS/GOEBEL 2. SLITTER REWINDER FOR CONVERTERS 3. DUAL SHAFT CENTRE WINDER WITH SEPARATE SHAFTLESS UNWINDER 4. TR 115-1400 Learn More

YY-2402 SEMI-AUTOMATIC PRODUCTION LINE FOR ROUND COTTON PADS PURPOSE OF MACHINE: THIS MACHINE CAN PRODUCE FACIAL COTTON PADS IN VARIOUS SHAPES OF COTTON PADS. FOR EACH DIFFERENT SHAPE OF SIZE, A SEPARATE TOOL IS NEEDED. QUANTITY: 1 Learn More

INVENTORY NUMBER: E-4553 FOAM MACHINERY FOR SALE QUANTITY AVAILABLE: 33 LOTS Learn More

S-1176 HIGH SPEED MULTI-HEAD BALL WINDING MACHINE, BALL DIAMETER 40mm TO 150mm

MULTI-HEAD BALL WINDER
HEAD QUANTITY: 4 TO 12 HEADS
CONTROL MODE: SEMI-AUTOMATIC
CONTROLLED BY PLC
DRIVEN BY 3 MOTORS
MOTORS DRIVEN BY SYNCHRONOUS BELT
ENABLE THE MACHINE TO RUN STABLE
BALL SIZE: BALL WEIGHT: 20G TO 1000G
BALL DIAMETER: 40mm TO 150mm
CAN MAKE ALL KINDS OF SHAPES BALL REFER TO THE CLIENTS REQUIREMENTS
OPERATION MODE: THE TECHNOLOGY PARAMETERS CAN BE ADJUSTED BY TOUCH SCREEN
TOTAL POWER: 3KW, 380VAC, 3PHASE, 50HZ

QUANTITY: 1

Learn More

REFERENCE NUMBER: A-1292 (010113GHBWQ12UL) A COMPLETE TERRY PLANT QUANTITY AVAILABLE: 1 Learn More