Search results for: 'incinerator'

TT-5978 JOHN ZINK CARBON STEEL INCINERATOR EQUIPMENT TYPE: INCINERATOR CONDITION: USED MOC: CARBON STEEL GAS FLOW RATE: 320 CFM PRESSURE: 125 PSI BURNER BRAND: JOHN ZINK BURNER TYPE: GAS BURNER BRAND: JOHN ZINK QUANTITY: 1 Learn More

CAPACITY: 60,000 MTPY THIS CAPROLACTAM FACILITY INCLUDES ALL INTERMEDIATE AND BYPRODUCT PLANTS. THE FACILITY STARTS WITH BENZENE AND FINISHES WITH CAPROLACTAM AND AMMONIUM SULFATE BYPRODUCT: CYCLOHEXANE PLANT – 79 KMTA CYCLOHEXANONE PLANT – 55 KMTA OXIMATION PLANT – 62 KMTA CAPROLACTAM PLANT – 60 KMTA AMMONIUM SULFATE – 108 KMTA INCINERATOR – 5 M3/HR LIQUID WASTE THE FACILITY HAD SOME UPGRADES OVER THE YEARS. THE MAJORITY OF THE SITE SHUT DOWN IN 2009, BUT THE CYCLOHEXANE UNIT RAN UNTIL AUGUST 2013. THE PROCESS WAS LICENSED FROM DUTCH STATE MINES (DSM), WITH ENGINEERING BY CHIYODA AND CONSTRUCTION BY MONTREAL. THE LICENSE HAS BEEN FULLY PAID. DOCUMENTATION IS COMPLETE AND WELL-ORGANIZED. MUCH OF IT IS ELECTRONIC AND HAS ALREADY BEEN SHARED WITH IPP. THE FACILITY RECEIVED ISO-9001 CERTIFICATION IN 1997 AND ISO-14001 CERTIFICATION IN 2004. DCS IS BY YOKOGAWA (CENTUM CS-3000) AND IS USED IN THE OXIMATION, CAPROLACTAM, AMMONIA SULFATE, AND INCINERATOR UNITS. THE PLANT HAS BEEN WELL-MAINTAINED AND IS STILL BEING KEPT UP WITH A STAFF OF FOUR EMPLOYEES. THERE IS A NITROGEN PAD ON THE PROCESS AND THEY ARE TURNING THE ROTATING EQUIPMENT MONTHLY. THE 15.1 HECTARES OF LAND CAN BE PURCHASED WITH THE FACILITY. THERE ARE ABUNDANT SPARE PARTS AVAILABLE WITH THE FACILITY. TRANSPORTATION TO AND FROM THE FACILITY BY ROAD IS EXCELLENT AND IT IS 24 KM TO THE NEAREST MAJOR PORT. THE PROCESS WAS LICENSED FROM DUTCH STATE MINES (DSM), WITH ENGINEERING BY CHIYODA AND CONSTRUCTION BY MONTREAL OF BRAZIL. THE LICENSE HAS BEEN FULLY PAID. RAW MATERIAL: BENZENE, HYDROGEN, AMMONIA, SULFURIC ACID Learn More

TT-5642 NATURAL GAS TREATMENT PLANT, CAPACITY 10,880,000 M3 PER DAY NATURAL GAS TREATMENT PLANT CAPACITY 10,880,000 M3 PER DAY (384,223,000 CFD) USED QUANTITY: 1 Learn More

R-6856 FUTURA K AUTOMATIC ROASTING MACHINES

AUTOMATIC ROASTING MACHINES RESULT OF LONG STUDIES AND LIVED EXPERIENCE.
THE ROASTING MACHINES SERIES FUTURA K ARE THE RESULT OF LONG STUDIES AND LIVED EXPERIENCE ALONGSIDE OUR CLIENTS COFFEE ROASTERS, FOR THE REALIZATION OF THE MOST ADVANCED MACHINERIES IN THE FIELD OF INDUSTRIAL COFFEE ROASTING.
THE COMPACT DIMENSIONS, RELIABILITY OF THE MATERIALS AND COMPONENTS, THERMAL MANAGEMENT WITH IMMEDIATE RESPONSE, CALIBRATED AND PARTICULARLY FUEL EFFICIENT, HIGH THERMAL AND ACOUSTIC INSULATION AND OTHER POSITIVE FEATURES, MAKE THESE MACHINES REFERENCEGUIDE IN PROFESSIONAL ROASTING FIELD.

MAIN COMPONENTS:
FEEDING HOPPER INSULATED WITH PNEUMATIC FILLER DEVICE, MOVABLE INLET, ELECTROPNEUMATIC UNLOADING CONTROL.
ROASTING DRUM MADE BY A FIXED HOUSING WITH DOUBLE INSULATING WALLS FOR THERMAL PROTECTION AND SUPPORTING THE ROTARY CYCLINDER THAT MOVES THE PRODUCT. THE WHOLE CYCLINDER IS MADE OF COMPOUND STEEL TO WITHSTAND THERMAL SHOCKS, ABSOLUTELY ODOURLESS, WITH PERFORATED SHEET FOR PRODUCT CONTAINEMENT, RIGHT AND LEFT BLENDERS SETTLED AT DIFFERENT LEVELS TO OBTAIN PERFECT MIXTURE.
WHEN THE ROASTING PROCESS IS FINISHED, THE COFFEE IS UNLOADED THROUGH A LARGE DOOR WITH ELECTROPNEUMATIC CONTROL OF OPENING AND CLOSING.
THE HEATING GENERATOR IS SPECIFICALLY DESIGNED FOR ROASTING LINE APPLICATIONS. THE PRINCIPLE OF HEATING IS BASED ON HOT AIR FLOWS BY CONVECTION. GAS OR GASOIL BURNER TYPE MODULATING OR MULTI LEVEL- FLAMES ACCORDING THE APPLICATION.
COOLING TANK WITH LARGE STAINLESS STEEL SURFACE, SELF CLEANING, WHERE THE PRODUCT IS MOVED BY MEANS OF 4 CROSSED ARMS. TWO DISCHARGES: ONE IS ELECTROPNEUMATICALLY DRIVEN AND THE OTHER IS MANUAL FOR EMERGENCY. DOOR OF INSPECTION AND EASY CLEANING OF THE LOWER SIDE.
PELLICLES SEPARATOR WITH EXTRACTION, BY WORM CONVEYOR OR INCINERATOR FOR CONSTANT EFFICIENCY OF THE AIR CHAFFS SEPARATION SYSTEM.
SUPPORTING FRAME IN TUBULAR PROFILES, STEEL MADE, TO CONTAIN AND SUPPORT THE OPERATING DEVICES, SO TO OBTAIN A COMPACT MACHINE-LIMITED ENCUMBRANCE, COMPLETE WITH PANELS FOR HEATING AND NOISE CONTAINMENT.
INDEPENDENT ELECTRIC CONTROL BOARD WITH PLC + TOUCH SCREEN AND ALL DEVICES FOR MACHINE CONTROL AND
MANAGEMENT, CAREFULLY WIRED AND EQUIPPED WITH ALL SIGNALS USEFULL FOR ROASTING PROCESS.

STANDARD EQUIPMENT:
AUTOMATIC ROASTING SYSTEM MANAGED BY PLC + TOUCH SCREEN WITH RECORDING FOR ROASTING CURVES – PROFILES.
VISUALIZATION BY MONITOR OF TEMPERATURES AND ROASTING FUNTIONS.
FIRE PREVENTION EQUIPMENT ON THE ROASTING DRUM AND COOLING TANK; ON THE CYCLONE-CHAFFS SEPARATOR IF EQUIPPED WITH WORM CONVEYOR FOR CHAFFS EXTRACTION.
ALARM SYSTEM BY BUZZER AND SIGNAL LAMP, UPON INTERVENTION OF THE OVERLOAD PROTECTION DEVICES ON THE ELECTRIC-MOTORS AND ON THE BURNER.
PROTECTING SAFETY SYSTEMS.
CYCLONE FOR COOLING TANK: STANDARD ON MOD. 240-300- 360-480.
OPTIONALS EQUIPMENT

COMPUTERIZED AUTOMATIC ROASTING PROCESS CARP MANAGED BY PC AND MONITOR.
HEATING RECOVERY SYSTE
SMOKE BURNER TYPE THERMICAL AND/OR CATALYST
CLEAN AIR ROASTING SYSTEM
CHAFFS COMPACTOR.

Learn More

R-3266 SIROCCO SR 35 ROASTER - 35 KILOS

SEVEN “MACHINES” IN ONE BODY. THAT SAVES YOU PRECIOUS SPACE, EXPENSIVE ENERGY, REDUCES WASTE AND TOTALLY QUIET. WHEN COMPARING, REMEMBER THAT YOU WILL NEVER NEED TO BUY OXIDIZER, AND A AFTERBURNER, SINCE IT IS ALL INCLUDED.
AFTERBURNER
INCINERATOR
CHAFF COLLECTOR
MANUALLY & PROGRAMMED PROFILE CONTROLLER
VARIABLE AIR SPEED CONTROLLER
SEPARATE HEAT CONTROLLER
GAS MODULATING CONTROLLER

COMPLETE ROASTING PROCESS WITH ALL FEATURES BUILT INSIDE ONE MACHINE
GENTLE CAST IRON ROASTING ENVIRONMENT
MECHANICALLY FLUIDIZED BEAN MOVEMENT
INTEGRATED AFTERBURNER AND INCINERATOR
TO ELIMINATE SMOKE, ODOR AND CHAFF
GRAPHICAL TOUCH SCREEN WITH PROFILE MEMORY
OVERSIZED INSPECTION PORTS
STIRFLEX COOLING TRAY
QUICK-RELEASE COOLER WITH REMOVABLE SCREEN
MAINTENANCE FREE SEALED ROASTING DRUM
BUILT-IN STONER BOOT
LOW PROFILE INFEED HOPPER
WEB-ENABLED FOR FACTORY ASSISTANCE AND DIAGNOSTICS
AUTOMATIC OR SEMI-AUTOMATIC OPERATION FOR CONSISTENT BATCHES
CLEAR PROCESS INFORMATION INCLUDES BEAN TEMP., ELAPSED TIME,
TEMPERATURE CHANGE AND STATUS

SPECIFICATIONS:
MODEL #: SR 35
BATCH CAPACITY: 35 KGS
DIMENSIONS: 35" W X 112" L X 84" H
COOLER DIAMETER: 40
HEAT SPECIFICATIONS: GAS & 380K-760K
WEIGHT: 3600 LBS

QUANTITY: 1

Learn More

R-3261 OFFICINE VITTORIA ROASTER WORKING ANTIQUE - 20 KILOS

NICE RESTORED WORKING ANTIQUE FOR THE CIRCA 1950'S. THERE IS A LITTLE GAS BURNER ON THE END OF THE HEAT INLET TUBE - AS THAT IS A COMMON FIX AS ORIGINALLY THE HEAT CAME FROM AN INCINERATOR LOOKING COAL BURNER - SO THE STICKING OF A SMALL PACKAGE BURNER ON THE SAME INLET TUBE WORKS GREAT AS THE SUCTION EXHAUSTING THE AIR THROUGH THE ROASTING DRUM (PERFORATED) SIMPLY PULLS IN THE HEAT NEEDED AND EVERYBODY IS HAPPY. YOU WILL NEED TO SUPPORT THAT INLET ARM IN SOME MANOR.

ADDITIONAL CONCERN IS THERE IS NO SHOWN CHAFF COLLECTOR - AS I WILL HAVE TO VERIFY IF THERE IS ONE - OTHERWISE A SEPARATE CHAFF COLLECTOR WILL NEED TO BE ADDED. THIS IS ALL SET FOR EUROPEAN VOLTAGE - 3 PHASE.

KEEP IN MIND, THE BASE IS ALL CAST IRON - SO THIS OPERATES REALLY QUIETLY, AND THAT IS A GOOD THING. THE SHOWMANSHIP IS STRONG ON THIS MACHINE AS IT LOOKS REALLY GREAT ON A SHOWROOM OR COFFEEHOUSE FLOOR. AS IT IS MADE TO BE SEEN. THIS IS A PARTIAL PROJECT AS THE INSTALLATION WILL TAKE SOME DETAIL AND REMEMBER THAT THERE ARE NO OFFICIAL PARTS SUPPLY - BUT EVERYTHING ON THESE MACHINES IS QUITE EASY TO ACCESS AND HAVING A LOCAL MACHINE SHOP AT HAND IS PROBABLY GOING TO BE NEEDED IN THE FUTURE - AFTER ALL, IT IS A 1950'S VINTAGE.

ALLOW FOR A FLOOR SPACE OF 4' X 7' TO ACCOMMODATE THE ROASTER AND CHAFF COLLECTOR. (1.22M X 2.12M)

THERE WILL BE SOME COST TO CRATE - TO BE ADVISED AS SOON AS YOU KNOW THIS IS THE RIGHT MACHINE FOR YOUR OPERATION.

IN PERFECT WORKING CONDITION

QUANTITY: 1

Learn More