Search results for: 'machine+tr'A=0'

TT-1552 SML TRI COLOR BCF MACHINE ALONG WITH SUPERBA HEAT SETTING LINE, YEAR 1994 TO 2002 ITEM 001 COMPLETE BARMAG BCF PLANT TYPE STM 16 PP, YEAR 1994 QUANTITY: 1 ITEM 002 11 BAR BROOMWADE AIR COMPRESSORS (193KW EACH) COMPLETE ELECTRICAL PANEL SETUP QUANTITY: 2 ITEM 003 RIETER CABLING MACHINES (CD/DT 510), YEAR 2002 120 SPINDLES EACH QUANTITY: 2 ITEM 004 SUPERBA HEAT SET PLANT, TYPE TVP2S, YEAR 2000 QUANTITY: 1 ITEM 005 EVILO REWINDERS, YEAR 1999 2 WINDING HEADS PER MACHINE QUANTITY: 2 ITEM 006 KARL MAYER REWINDER, YEAR 1999 2 WINDING HEADS QUANTITY: 1 LAB AND TEST EQUIPMENT STATUS: STOPPED DELIVERY: AT SHORT NOTICE QUANTITY: 1 Learn More

REFERENCE NUMBER: J-1113 (1111JKLBVXX10) USED KARL MAYER LACE AND TRICOT MACHINES YEARS 1978-2001 WIDTH 43 SU TO 210” QUANTITY AVAILABLE: 45 Learn More

REFERENCE NUMBER: K-5243 (YOU MUST LOOK AT THE VIDEO, IT’S AMAZING) AUTOMATIC TRIMMING MACHINE FOR FOAM BLOCKS OR FOAM MATTRESSES, FOUR SIDES DESCRIPTION: PU SLABS CUT FROM FOAM BLOCK BY HORIZONTAL CUTTING UNDERGO PERIMETRICAL STRETCHING, (SOMETIMES A FEW CENTIMETERS STRETCHING). IN ORDER TO ACHIEVE SATISFACTORY SIZES (±1MM EACH SIDE) THE REMOVING OF IRREGULAR EDGES IS REQUIRED. THIS MACHINE TRIMS FOAM SLABS AND ALSO COUPLED SLABS. IT CAN BE PLACED AT THE END OF THE MATTRESS GLUING PLANT (MANUAL OR AUTOMATIC) OR BEYOND THE HORIZONTAL CUTTING MACHINE. THE COUPLED FOAM SHEETS ARE NOT ALIGNED AND NEED TO BE TRIMMED. OFTEN THE COUPLED MATTRESSES ARE TRIMMED ONE BY ONE ALONG THE FOUR SIDES WITH A MANUAL VERTICAL CUTTING MACHINE WASTING A LARGE AMOUNT OF TIME. THIS MACHINE AUTOMATICALLY TRIMS THE FOUR SIDES OF FOAM MATTRESSES WITHOUT ANY HANDLING; THAT MEANS AN ACCURATE TRIM AND SHORT PROCESSING TIME. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1861 (1313235MKD12RX) SANTEX PRE-TREATMENT AND WASHING MACHINE TYPE ACTIWASH YEAR 2002 DESIGNED FOR LOW-TENSION PRE-TREATMENT OF WOVEN AND KNITTED GOODS MANUFACTURER: SANTEX - SWITZERLAND YEAR OF MANUFACTURE: 2002 WORKING WIDTH: 2200/1800 mm SPEED OF MACHINE: 3-100 M/MIN PRODUCTION SPEED: APPROX. 75 M/MIN THE DAILY OUTPUT WILL DEPEND E.G. ON QUALITY AND WEIGHT OF FABRICS/KNIT GOODS YOU WILL WASH ON THESE MACHINES. SO FAR THE PLANT WAS RUNNING AT AN AVERAGE SPEED OF 40 M/MIN, I.E. 2,400 MTRS PER WORKING HOUR. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1861 (770235KOL6RX) SANTEX PRE-TREATMENT AND WASHING MACHINE TYPE ACTIWASH YEAR 2002 DESIGNED FOR LOW-TENSION PRE-TREATMENT OF WOVEN AND KNITTED GOODS MANUFACTURER: SANTEX - SWITZERLAND YEAR OF MANUFACTURE: 2002 WORKING WIDTH: 2200/1800 mm SPEED OF MACHINE: 3-100 M/MIN PRODUCTION SPEED: APPROX. 75 M/MIN THE DAILY OUTPUT WILL DEPEND E.G. ON QUALITY AND WEIGHT OF FABRICS/KNIT GOODS YOU WILL WASH ON THESE MACHINES. SO FAR THE PLANT WAS RUNNING AT AN AVERAGE SPEED OF 40 M/MIN, I.E. 2,400 MTRS PER WORKING HOUR. QUANTITY AVAILABLE: 1 Learn More

TT-4055 MONTI ANTONIO TRANSFER PRINTING MACHINE, WORKING WIDTH 3300mm, YEAR 2002 QUANTITY: 1 Learn More

TT-3462 MONTI ANTONIO TRANSFER PRINTING MACHINE, WORKING WIDTH 3300mm, YEAR 2002 QUANTITY: 1 Learn More

YY-2099 AMERICAN TRUETZSCHLER INC FIBER FILLING MACHINE QUANTITY: 3 Learn More

MASK DIMENSIONS: 17.5 x 9.5mm
CAPACITY: 90 TO 110 PIECES PER MINUTE
MATERIAL: PP FABRIC
3 LAYERS
USES ULTRASONIC SEALING, 15 KHZ WHILE RUNNING
THERE IS ALUMINUM STRIP ON THE NOSE BRIDGE (ALUMINUM STRIP INSERTION)
DIMENSIONS: 7100mm x 3000mm x 1980mm
POWER: 10 KW
220 VOLTS, 5O OR 60 Hz
AIR PRESSURE: 0.6 MPA

QUANTITY: 1

Learn More

UP TO 80 SPRINGS PER MINUTE FOR 38,400 SPRINGS IN 8 HOURS
APPROX. 130 SPRINGS DOUBLE BED INNERSPRING UNITS PER 8 HOURS
APPROX. 210 SPRINGS SINGLE BED INNERSPRING UNITS PER 8 HOURS

SPRING OUTSIDE DIAMETER: 80 TO 92mm
SPRING WIRE DIAMETER: 1.9 TO 2.4mm
SPIRAL WIRE DIAMETER: 1.3 TO 1.4mm
SPRING HEIGHT: 80 TO 160mm
MAX. # OF JAWS: 18
MAX. SPRING UNIT WIDTH: 2000mm
POWER: 3 PHASE, 380 VOLTS
POWER: 18 KW
FREQUENCY: 50/60 Hz
WORKING TEMP: 0 TO 40C
WIRE BASKET CAPACITY: 1,000 KGS
WEIGHT: APPROX 4800 KGS
DIMENSIONS: 5600 X 3700 X 2250mm

Learn More