Search results for: 'equi''

TT-5007 COMPLETE EQUIPMENT AND LAMINATION FOR BACKING FABRICS FOR ABRASIVES, YEAR 1986 TO 2021 MACHINES STILL UNDER PRODUCTION AND INSPECTION ANYTIME POSSIBLE. THE ENTIRE PLANT IS OPERATED BY 12 PEOPLE. ALL AVAILABLE SPARE PARTS, SPECIAL TOOLS AND OPERATING MATERIALS ARE SUPPLIED WITH THE PLANT. Learn More

REFERENCE NUMBER: M-4608 (11116SWJK10R) L VILLARS-SANTEX HOTMELT POWDER SCATTERING AND LAMINATING MACHINE YEAR 1993 WIDTH 2100mm LAMINATING LINE MANUFACTURER: VILLARS (CH) ACTUALLY SANTEX YEAR OF CONSTRUCTION: 1993 WORKING WIDTH: 2200mm (NOMINAL WIDTH 2100mm) OPERATING VOLTAGE: 3X380(400)V TOTAL POWER: 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION: INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997): 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’. KNOWN PROBLEMS: 1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN 2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED. ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM MANUFACTURER: MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE) YEAR OF CONSTRUCTION: 1999 OPERATING VOLTAGE: 3X380V CAPACITY ACCUMULATOR: +/- 50M UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY) SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE MANUFACTURER: MENZEL YEAR OF CONSTRUCTION: 2000 OPERATING VOLTAGE: 3X380V FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT. A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION. THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT. KNOWN PROBLEM: PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE) MISCELLANEA SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS CAN BE INSPECTED BUT NOT IN PRODUCTION MACHINE WILL BE DISMANTLED AT END OF NOV 2014 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3973 (99016AVEZ8RX)-D HOTMELT POWDER SCATTERING AND LAMINATING MACHINE-2200mm 1.LAMINATING LINE : MAKE : VILLARS (CH) ACTUALLY SANTEX YEAR: 1993 WORKING WIDTH : 2200mm (NOMINAL WIDTH 2M10) VOLTAGE: 3X380(400)V TOTAL POWER : 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION : INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997) : 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’. KNOWN PROBLEMS : 1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN 2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED 2.ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM : MAKE : MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE) YEAR: 1999 OPERATING VOLTAGE : 3X380V CAPACITY ACCUMULATOR : +/- 50M UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY) 3. SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE : MAKE: MENZEL YEAR: 2000 OPERATING VOLTAGE : 3X380V FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT. A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION. THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT KNOWN PROBLEM : PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE) 4.MISCELLANEOUS : SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS Learn More

J-3048 DOUBLE BELT FLAT BED LAMINATOR, WORKING WIDTH 1800mm, FOR PU, PP & PE FILM – 10 μm DOUBLE BELT FLAT BED LAMINATOR WORKING WIDTH 1800mm (DIFFERENT WIDTHS AVAILABLE) FOR INDUSTRIAL TEXTILES: PU FOAM, POLYPROPYLENE OR POLYESTER FILM FILM THICKNESS: 10 μm QUANTITY: 1 Learn More

TT-4545 BOBST NOVA SX 550 LAMINATOR 800 / 350, YEAR 2022 SOLVENTLESS-LAMINATOR YEAR OF CONSTRUCTION: 2022 FOR NARROW WEB FLEXIBLE PACKAGING Learn More

TT-2175 ANTISLIP LAMINATING & PVC BACK-COATING LINE, WORKING WIDTH MINIMUM 1200mm, YEAR 2022 -FOR CARPET INDUSTRY WORKING WIDTH: MINIMUM 1200mm, MAXIMUM 4000mm WORKING SPEED: 7 METERS PER MINUTE PRIMARY GOODS: RUG AND BLANKET AND FABRIC COATING TYPE: PVC PLANT CAN BE USE FOR CARPET, FELT AND FABRIC FIRST FELT IS LAMINATED ON THE BACK FROM THE CARPET SECOND DOTTING FLEXIBLE PVC BACKING CARPET FELT PLANT IS BRAND NEW 2022 EXCLUSIVE TRANSPORT, FLIGHT TICKETS, HOTEL ACCOMODATION, FOOD & DRINKS QUANTITY: 1 Learn More

C-4013 VILLARS AG SCATTER- COATING AND LAMINATING MACHINE, WORKING WIDTH 1000mm, YEAR 1994

MAKE: VILLARS AG
YEAR: 1994
WORKING WIDTH: 1000mm
WORKING SPEED: 0 TO 10 M/MIN
ELECTRICAL POWER: 3 X 400 VOLT + PN + PE, 50 HZ
POWER: 140 KW
WEIGHT: 8637 KGS

QUANTITY: 1

Learn More

REFERENCE NUMBER: V-0021 LAMINATOR FOR FABRIC 1600mm THIS MACHINE IS DESIGNED SPECIFICALLY FOR THE HIGH PRODUCTION AND LOW TEMPERATURE FUSING NEEDS OF SPORTSWEAR. THE ADVANCED HEATING SYSTEM ASSURES A SOFT FLEXIBLE FUSED ASSEMBLY, MAINTAINING FABRIC STRUCTURE AND AVOIDING SHRINKAGE OR FADING, WHILE IT PROVIDES ABSOLUTE CONTROL OF THE ADHESIVE RESINS ON ANY TYPE OF INTERLINING SELECTED. BELT SIZE IS 63”. THE COMBINATION OF TWO ZONE, CONDUCTIVE HEAT APPLICATION WITH PRECISE SPEED AND PRESSURE CONTROL, ASSURES QUALITY RESULTS ON ALL FUSED ASSEMBLIES. OPTIONAL EQUIPMENT INCLUDES FOLDING LATERAL LOADING SHELVES, UNROLL & RE-ROLL SYSTEMS, AND 380 VOLT ELECTRICAL SYSTEM. THE SC SERIES IS DESIGNED WITH SAFETY AND OPERATOR COMFORT IN MIND. THIS MODEL MEETS OR EXCEEDS WORLDWIDE STANDARDS IN SAFETY AND EFFICIENCY, INCLUDING THE EUROPEAN CE RATING. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4787 (1111BGJWXX10) L BLACK CLAWSON EXTRUSION COATER LAMINATOR YEAR 1992 WEB WIDTH 1575mm BLACK CLAWSON EXTRUSION COATER LAMINATOR YEAR 1992 WEB WIDTH 1575mm (62 INCHES) L/D(S): 30:1 DRIVE SYSTEM: 250HP DC DRIVE SPEED: 305 MPM (1000 FPM) EXTRUDER(S): BLACK CLAWSON PRIME COATER: NONE SIZE(S): 4-1/2” PRIMARY UNWIND: NONE SECONDARY UNWIND: NONE REWIND: NONE DRYER TYPE: NONE EQUIPPED WITH MODEL 111 EXTRUSION COATER WITH 30” DIAMETER X 72” FACE CHILL ROLL PRESSURE ROLL ASSEMBLY WITH 12” DIAMETER, 6” DIAMETER NIP ROLL AND LEAD-IN SPREADER ROLL 11” DIAMETER SECONDARY CHILL ROLL; SLITTING STATION MODEL 400 EXTRUDER MOUNTED ON XYZ CARRIAGE WITH 250HP DC MOTOR 4-1/2” DIAMETER SCREW IS ELECTRICALLY HEATED AND WATER COOLED; VALVED ADAPTER 72” CLOEREN AUTOMATIC DYE WITH EDGE BEAD REDUCTION AND EXHAUST HOOD QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4788 (1111KYWJXX10) L ER-WE-PA EXTRUSION COATER LAMINATOR YEAR 1985 WEB WIDTH 1575mm ER-WE-PA EXTRUSION COATER LAMINATOR, 1985 YEAR WEB WIDTH: 1575 mm (62 IN) L/D(S): 30:1 DRIVE SYSTEM: DC DRIVE SPEED: 366 MPM (1200 FPM) EXTRUDER(S): ER-WE-PA PRIME COATER: NONE SIZE(S): 4-1/2" 3-1/2" PRIMARY UNWIND: NONE SECONDARY UNWIND: NONE REWIND: NONE DRYER TYPE: NONE USED ER-WE-PA EXTRUSION COATER LAMINATOR STATION EQUIPPED WITH EXTRUSION COATER WITH 27" DIAMETER X 72" FACE CHILL ROLL 7.5" DIAMETER RUBBER COVERED NIP ROLL, 12" DIAMETER CHROME BACKING ROLL, 14" DIAMETER SECONDARY CHILL ROLL, RAZOR EDGE TRIM SECTION 72" EDI/WELEX AUTOFLEX SHEET EXTRUSION DIE DIE WITH EXTERNAL DECKLING 4.5" AND 3.5" ER-WE-PA EXTRUDERS WITH 30:1 L/D; EXTRUDERS MOUNTED ON XYZ CARRIAGE. MACHINE DOES NOT INCLUDE AN UNWIND OR REWIND. QUANTITY AVAILABLE: 1 Learn More