J-3163 PUR HOT MELT GLUE LAMINATING MACHINE, WORKING WIDTH 2200mm
WORKING WIDTH: 2200mm
ROLLER WIDTH: 2400mm
LAMINATES FABRIC TO FABRIC AND FABRIC TO FILM
GLUE TYPE: HOT MELT PUR GLUE
WORKING SPEED: 0 TO 40M/MIN
HEATING METHOD: ELECTRICITY, THERMAL OIL
INSTALLED CAPACITY: ABOUT 80KVA
COMPRESSED AIR: 4-8BAR
HEATED PIPE LENGTH: 5M
MAIN CONFIGURATION
PART ONE BASE FABRIC UNWINDING DEVICE
UNWINDING RACK - 4 SET
φ74 PNEUMATIC SHAFT - 4 PC
DAMPING DEVICE - 4 SET
UNWINDING UNIT - 4 EA
EPC POSITION ADJUST DEVICE - 1 SET
φ75 ALUMINUM ALLOY ROLLER - 5 PC
MACHINE RACK - 1 SET
FOOTBOARD - 1 EA
Learn More
J-3175 HOT MELT FILM LAMINATING MACHINE FOR PLAIN WOVEN FABRIC
MACHINE SPEED: 20 TO 40 METERS PER MINUTE
ESTIMATED MACHINE DIMENSIONS: 8850mm x 2450mm x 2200mm (L*W*H)
ESTIMATED MACHINE WEIGHT: 6000 KG
MOTOR BRAND: SIEMENS
ELECTRIC BRAND: SCHNEIDER
QUANTITY: 1
Learn More
REFERENCE NUMBER: M-3973 (99016AVEZ8RX)-D
HOTMELT POWDER SCATTERING AND LAMINATING MACHINE-2200mm
1.LAMINATING LINE :
MAKE : VILLARS (CH) ACTUALLY SANTEX
YEAR: 1993
WORKING WIDTH : 2200mm (NOMINAL WIDTH 2M10)
VOLTAGE: 3X380(400)V
TOTAL POWER : 158KW
RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE
ORIGINAL CONFIGURATION : INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR)
LATER EXTENSION (1997) : 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR
AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’.
KNOWN PROBLEMS :
1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN
2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED
2.ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM :
MAKE : MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE)
YEAR: 1999
OPERATING VOLTAGE : 3X380V
CAPACITY ACCUMULATOR : +/- 50M
UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY)
3. SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE :
MAKE: MENZEL
YEAR: 2000
OPERATING VOLTAGE : 3X380V
FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE
MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT.
A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION.
THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT
KNOWN PROBLEM : PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE)
4.MISCELLANEOUS :
SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT
SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION
SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS
SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS
Learn More
TT-5007 COMPLETE EQUIPMENT AND LAMINATION FOR BACKING FABRICS FOR ABRASIVES, YEAR 1986 TO 2021
MACHINES STILL UNDER PRODUCTION AND INSPECTION ANYTIME POSSIBLE.
THE ENTIRE PLANT IS OPERATED BY 12 PEOPLE.
ALL AVAILABLE SPARE PARTS, SPECIAL TOOLS AND OPERATING MATERIALS ARE SUPPLIED WITH THE
PLANT. Learn More
TT-2113 KROENERT TYPE PAK 600 WAXER / LAMINATOR / COATER, WORKING WIDTH 500 TO 1050mm
ITEM 001
KROENERT TYPE PAK 600 WAXER / LAMINATOR / COATER
IN 1980 STARTED PRODUCTION
TEST POSSIBLE – IMMEDIATELY FREE FOR SALE
ITEM 002
STAMPING AND EMBOSSING MACHINE HEIDEMANN
ITEM 003
WAX-LAMINATOR KROENERT-PACK 850
THE MACHINE CAN BE DISMANTLED AS FROM NOW.
Learn More
A-2502
PUR LAMINATING MACHINE
MODE SPECIFICATION: 240 X 1350 mm
BOARD LENGTH: ANY MORE THAN 600 mm
BOARD THICKNESS: 3 TO 50 mm
BOARD WIDTH: 1220 mm
OUTER DIMENSION OF MACHINE: 14100 X 2300 X 2500 mm
RATE OF MATERIAL DELIVER: 1 TO 25 M/min
GENERAL POWER: 46 KW
TEMPERATURE MEASUREMENT SYSTEM: GERMANY IMPAC
PRINCIPAL AXIS ROLLER DIAMETER: 320 mm
MACHINE WEIGHT: 6000 KG
PAPER WIDTH: 1280 mm
Learn More
J-3163 PUR HOT MELT GLUE LAMINATING MACHINE, WORKING WIDTH 2200mmJ-3163 PUR HOT MELT GLUE LAMINATING MACHINE, WORKING WIDTH 2200mm WORKING WIDTH: 2200mm ROLLER WIDTH: 2400mm LAMINATES FABRIC TO FABRIC AND FABRIC TO FILM GLUE TYPE: HOT MELT PUR GLUE WORKING SPEED: 0 TO 40M/MIN HEATING METHOD: ELECTRICITY, THERMAL OIL INSTALLED CAPACITY: ABOUT 80KVA COMPRESSED AIR: 4-8BAR HEATED PIPE LENGTH: 5M MAIN CONFIGURATION PART ONE BASE FABRIC UNWINDING DEVICE UNWINDING RACK - 4 SET φ74 PNEUMATIC SHAFT - 4 PC DAMPING DEVICE - 4 SET UNWINDING UNIT - 4 EA EPC POSITION ADJUST DEVICE - 1 SET φ75 ALUMINUM ALLOY ROLLER - 5 PC MACHINE RACK - 1 SET FOOTBOARD - 1 EA Learn More
J-3175 HOT MELT FILM LAMINATING MACHINE FOR PLAIN WOVEN FABRICJ-3175 HOT MELT FILM LAMINATING MACHINE FOR PLAIN WOVEN FABRIC MACHINE SPEED: 20 TO 40 METERS PER MINUTE ESTIMATED MACHINE DIMENSIONS: 8850mm x 2450mm x 2200mm (L*W*H) ESTIMATED MACHINE WEIGHT: 6000 KG MOTOR BRAND: SIEMENS ELECTRIC BRAND: SCHNEIDER QUANTITY: 1 Learn More
YY-3064 HOTMELT LAMINATING & COATING MACHINE MONTI ANTONIO, YEAR 2002, WIDTH 1800mmYY-3064 HOTMELT LAMINATING & COATING MACHINE MONTI ANTONIO, YEAR 2002, WIDTH 1800mm HOTMELT LAMINATING & COATING MACHINE MONTI ANTONIO MODEL: CE60-2 YEAR: 2002 WIDTH: 1800mm CONDITION: IN VERY GOOD CONDITION QUANTITY: 1 Learn More
M-3973 HOTMELT POWDER SCATTERING AND LAMINATING MACHINE-2200mmREFERENCE NUMBER: M-3973 (99016AVEZ8RX)-D HOTMELT POWDER SCATTERING AND LAMINATING MACHINE-2200mm 1.LAMINATING LINE : MAKE : VILLARS (CH) ACTUALLY SANTEX YEAR: 1993 WORKING WIDTH : 2200mm (NOMINAL WIDTH 2M10) VOLTAGE: 3X380(400)V TOTAL POWER : 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION : INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997) : 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’. KNOWN PROBLEMS : 1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN 2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED 2.ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM : MAKE : MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE) YEAR: 1999 OPERATING VOLTAGE : 3X380V CAPACITY ACCUMULATOR : +/- 50M UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY) 3. SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE : MAKE: MENZEL YEAR: 2000 OPERATING VOLTAGE : 3X380V FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT. A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION. THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT KNOWN PROBLEM : PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE) 4.MISCELLANEOUS : SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS Learn More
YY-3093 FLATBED DOUBLE-BELT LAMINATING MACHINE, 2000mm WORKING WIDTH - NEWYY-3093 FLATBED DOUBLE-BELT LAMINATING MACHINE, 2000mm WORKING WIDTH - NEW ASK FOR MORE DETAILS! Learn More
TT-5007 COMPLETE EQUIPMENT AND LAMINATION FOR BACKING FABRICS FOR ABRASIVES, YEAR 1986 TO 2021TT-5007 COMPLETE EQUIPMENT AND LAMINATION FOR BACKING FABRICS FOR ABRASIVES, YEAR 1986 TO 2021 MACHINES STILL UNDER PRODUCTION AND INSPECTION ANYTIME POSSIBLE. THE ENTIRE PLANT IS OPERATED BY 12 PEOPLE. ALL AVAILABLE SPARE PARTS, SPECIAL TOOLS AND OPERATING MATERIALS ARE SUPPLIED WITH THE PLANT. Learn More
TT-2113 KROENERT TYPE PAK 600 WAXER / LAMINATOR / COATER, WORKING WIDTH 500 TO 1050mmTT-2113 KROENERT TYPE PAK 600 WAXER / LAMINATOR / COATER, WORKING WIDTH 500 TO 1050mm ITEM 001 KROENERT TYPE PAK 600 WAXER / LAMINATOR / COATER IN 1980 STARTED PRODUCTION TEST POSSIBLE – IMMEDIATELY FREE FOR SALE ITEM 002 STAMPING AND EMBOSSING MACHINE HEIDEMANN ITEM 003 WAX-LAMINATOR KROENERT-PACK 850 THE MACHINE CAN BE DISMANTLED AS FROM NOW. Learn More
A-2502 PUR LAMINATING MACHINEA-2502 PUR LAMINATING MACHINE MODE SPECIFICATION: 240 X 1350 mm BOARD LENGTH: ANY MORE THAN 600 mm BOARD THICKNESS: 3 TO 50 mm BOARD WIDTH: 1220 mm OUTER DIMENSION OF MACHINE: 14100 X 2300 X 2500 mm RATE OF MATERIAL DELIVER: 1 TO 25 M/min GENERAL POWER: 46 KW TEMPERATURE MEASUREMENT SYSTEM: GERMANY IMPAC PRINCIPAL AXIS ROLLER DIAMETER: 320 mm MACHINE WEIGHT: 6000 KG PAPER WIDTH: 1280 mm Learn More