TT-2113 KROENERT TYPE PAK 600 WAXER / LAMINATOR / COATER, WORKING WIDTH 500 TO 1050mm

REFERENCE NUMBER: TT-2113 KROENERT TYPE PAK 600 WAXER / LAMINATOR / COATER, WORKING WIDTH 500 TO 1050mm ITEM 001 KROENERT TYPE PAK 600 WAXER / LAMINATOR / COATER IN 1980 STARTED PRODUCTION ROLL TO ROLL PARAFFIN / WAX / HOT¬MELT, ALSO FOR COATING WORKING WIDTH: 500 TO 1050mm REEL DIAMETER: 600 TO 1000 M SPEED ABOUT: 300 M / MIN ACCESSORIES: 24 PCS LAMINATING ROLLER, 9 PCS PAINTING ROLLER PLUS ALL SPARE PARTS, ENGINES, GEARBOXES SPARE PARTS WE HAVE, ARE LIKE ALMOST A WHOLE NEW MACHINE. WORKING TEMPERATURE: UP TO 180 ° C ELECTRO DRYER – BRIDGE OVER THE MACHINE VISCOSITY: UP TO 3,000 MPAS MIN. COATING WEIGHT: APPROX. 3-12 G / M MAX. COATING WEIGHT: APPROX. 50 G / M 2 HOTMELT: 8-25 G/QM THICKNESS OF MATERIAL 20-120 G/QM - SINGLE- AND DOUBLE-SIDED APPLICATION - 2X RESERVOIR, ONE FOR WAX, THE OTHER FOR VARNISH - COOLING CYLINDERS - FLOW COOLING - UNWINDING PAPER DIAMETER 1000mm, SLEEVES 70, 76, 150mm - REWIND TUBE 150mm SPACE: 4500 X 10000 X 4500mm HIGH POSSIBLE SUBSTRATES: PVC, ALU, PAPER, CARDBOARD, FOR PARAFFIN, WAX AND HOTMELT COATING, HEATED BY THERMAL OIL, PAK MELT TANK, THERMAL OIL HEATERS LOT OF SPARE-PARTS, ESPECIALLY CYLINDERS NEARLY SECOND MACHINE TO CAN BE EXCHANGED TEST POSSIBLE – IMMEDIATELY FREE FOR SALE ITEM 002 STAMPING AND EMBOSSING MACHINE HEIDEMANN ROLL TO ROLL, UNWIND UP TO 1000mm ROLLS DIAMETER, 1× STEEL CYLINDER WITH 850mm GRAVURE WIDTH – 188mm DIAMETER – INSTALLED IN THE MACHINE. 1× PAPER ROLL WITH 850mm EFFECTIVE WIDTH – 380mm DIAMETER – INSTALLED IN THE MACHINE, STEEL DRUM IN RESERVE, 2 PAPER ROLLS AS A RESERVE. CUTTING UNIT WITH SQUEEZING FOR LONGITUDINAL CUTTING, REWIND UP TO 600mm DIAMETER, THE MACHINE IS IN TOP CONDITION ITEM 003 WAX-LAMINATOR KROENERT-PACK 850 THE MACHINE CAN BE DISMANTLED AS FROM NOW. MACHINE IS FROM 1970 AND WAS USED INTO PRODUCTION UNTIL 2017, BUT TEST POSSIBLE ON DEMAND THE MACHINE HAS 2 UNWINDER FOR THE PAPER DIAMETER IS 1000mm FOR THE ALU IT IS 650mm ROLL (PAPER/ALUFILM) IS COATED WITH A WAX THICKNESS THE ALU FOIL IS THE ONE THAT IS COATED, WITH 7 À 11 GR WAX. THE REWIND DIAMETER IS 1000mm TO APLY PARAFFIN OR HOTMELT SINGLE-SIDED PARAFFIN-COATING HOTMELT IS ALSO POSSIBLE ANOTHER MATERIALS ALSO POSSIBLE- COMBINATIONS ALUMINUM/PAPER, MICRO-PERFORATED OPP/PAPER, MICRO-PERFORATED PET/PAPER, AND ALUMINUM/OPP, THICKNESS MINIMUM-MAXIMUM WE ONLY WORKED WITH ALUMINIUM 7-8µ AND PAPER 40-60 GR WORKING TEMPERATURE, VISCOSITY, MINIM AND MAX. COATING WEIGHT 120°C – VISCOSITY 25-40 CPS/MPAS NO DRYER PRE MELT TANK: 550mm X 660mm X 520mm ELECTROSCHEMA-MANUAL BY THE MACHINE ELECTRIC SCHEME’S ARE PRESENT, NO MANUAL SELLER DID USE IT TO LAMINATE OUR PAPER WITH ALU FOIL, FOR BUTTER WRAPPAPER MAX SPEED IS 160 M/MIN, BY WIDTH 850mm