Search results for: 'F&k c'

R-1708 MCS JET DYEING MACHINE, CAPACITY 720 TO 800 KGS, YEAR 2001

MCS JET DYEING MACHINE
YEAR: 2001
TYPE: MFJ KHT
4 TUBE HT 140C
CAPACITY: 720 TO 800 KGS
TERMOELETTRONICA PLC PROGRAMMABLE CONTROLLER
TYPE: CT-301

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4167

KUSTER BLEACHING RANGE 3200mm YEAR 1992

 

KUSTERS BLEACHING RANGE

YEAR 1992 BUT UPGRADED IN YEAR 2011 WITH NEW INVERTERS, ELECTRONIC ETC

ROLLER WIDTH: 3400mm

FABRIC WIDTH: 3200mm

3 PRE WASHING COMPARTMENTS

IMPREGNATIONS PADDER

REACTION CHAMBER WITH ROLLER BED AND TIGHT STRAND, CAPACITY 2000 METERS

4 x WASHING COMPARTMENTS

EXIT BATCHER

380 V 50HZ

INVERTER CONTROL

Learn More

REFERENCE NUMBER: M-4327

BENNINGER ZELL SIZING MACHINE MODEL BEN-SIZETEC WORKING WIDTH 2200mm YEAR 1994

 

BENNINGER ZELL SIZING MACHINE  MODEL BEN - SIZETEC WORKING WIDTH 2200 mm

YEAR  1994, WITH SECTIONAL AND FRACTIONAL SYSTEM.

N° A13715

MODEL  BB-S/ZT4/4/TKD

1 SECTIONAL BEAM UNROLLING DEVICE MODEL SWA WITH LOADING CELL FOR MEASURING

THE OUT GOING TENSION .

ELECTRO PNEUMATIC BREAKING SYSTEM

MAXIMUM BEAM DIAMETER 1000 mm.

1 FRACTIONAL BEAMING UNROLLING DEVICE WITH CAPACITY UP TO 20 POSITIONS

ELECTRO PNEUMATIC BREAKING SYSTEM

1 SIZING BOX MODEL TDK WORKING WIDTH 2200 mm. TOTAL WIDTH 2400 mm

STAINLESS STEEL BOX WITH TOTAL CAPACITY OF 240 LITERS WITH DIRECT STEAM INJECTION

LOWER VESSELS WITH INDIRECT HEAT SYSTEM

AUTOMATIC SIZE BOX FEEDING

HANDYMAT FOR START AND STOP AND MACHINE REGULATION

1 DRYING SECTION DEVICE MODEL ZT8 – WORKING WIDTH 2200 mm

6 DRYING STAINLESS STEEL CYLINDERS COVERED WITH TEFLON + 2 CYLINDERS WITHOUT TEFLON

4 ELECTRONIC TEMPERATURE REGULATIONS

2 AIR EXTRACTION

1 OIL/GREASE APPLICATION DEVICE MODEL CV

1 YARN SPLITTING DEVICE

7 RODS FOR SECTIONAL BEAMS

19 RODS FOR FRACTIONAL BEAMS

1 HUMIDITY MAHLO CONTROL DEVICE MODEL RMS-7S N°1670/1/10597

1 BEAM ROLLING DEVICE MODEL BB FOR BEAMS UP TO 1000 mm DIAMETER

YARN TRACTION MADE UP OF 3 ROLLS

1 PRESSURIZED ROLLER DEVICE

TENSION AND PRESSURE MEASURE DEVICES

AUTOMATIC BEAM LIFT DEVICE INCLUSIVE OF ADAPTORS FOR DIFFERENT BEAMS

EXTENSION REED FOR ENDS WIDTH CONTROL

MIRROR FOR EASY YARN CONTROL

1 HANDYMAT FOR START AND STOP AND MACHINE REGULATION

1 DUST SUCTION DEVICE

1 COMPLETE SIZE KITCHEN PREPARATION INCLUDING 2 TANKS FOR SIZE STORAGE

1 FULLY AUTOMATIC BENSIZETEC PROCESS CONTROL DEVICE INCLUDING HARDWARE AND SOFTWARE

1 EXTERNAL ELECTRIC CABINET.

Learn More

REFERENCE NUMBER: K-5601

KUSTERS CONTINOUS BLEACHING RANGE YEAR 2004 3400MM

 

YOM: 2004

WIDTH: 3400mm

FACE WIDTH

WORKING WIDTH 3200mm

PRODUCTION SPEED 70 METER/MIN

TECHNICAL SPEED 100 METER/MIN

WATER PRESSURE 2.0-2.5 BAR

STEAM 2.0-2.5 BAR

REQUILTERED COMPRESSED AIR 7.0 BAR

FABRIC WEIGHT 70-250 GSM

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-3847

ALEA STENTER FOR KNITS

WORKING WIDTH: 2600mm

6 CHAMBERS GAS HEATED

BETA TWO BOWL IMPREGNATION PADDER

WITH DOUBLE IMPREGNATION THROUGH

AND CORINO OPEN WIDTH SPREADERS

ROLLER WIDTH: 2400mm

YEAR: 1998

QUANTITY: 1

 

Learn More

REFERENCE NUMBER: M-5982 (8802DNWT7UX) L STRAYFIELD HIGH FREQUENCY DRYER 90 KVA YEAR 1988 – 1400mm HIGH FREQUENCY DRYER MAKE: STRAYFIELD MODEL TYPE: SS040/TP CURRENT POWER SUPPLY: 415 VOLT / 50 HZ SUPPLY PHASES: 3 SUPPLY KVA: 90 R.F. POWER OUTPUT: 40 KW OPERATING FREQUENCY: 27.12 MHZ YEAR OF MANUFACTURE: 1988 EVAPORATION CAPACITY: 52 KGS PER HOUR STANDARD CONVEYOR (BAND) WIDTH: 1400mm CONVEYOR LENGTH: INFEED: 3000mm DRYING CHAMBER: 5100mm OUTFEED: 1400mm TOTAL CONVEYOR LENGTH: 1400mm 1400mm OUTFEED WILL FIT INTO ONE 40’ FOOT CONTAINER THE EQUIPMENT IS ASSEMBLED AND CAN BE SEEN RUNNING PRICE IS AS-IS, INCLUDES SPARES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: P-2067 SCLAVOS HT DYE MACHINE YEAR 1994 3 PORTS SCLAVOS HT DYE MACHINE YEAR: 1994 3 PORTS 140 DEGREE C CAPACITY: 500 KILOGRAMS EQUIPPED WITH: HEAT EXCHANGER ADD TANKS DOSING PUMPS OPERATOR PLAT FORM & COMPLETE WITH ELECTRICAL PANEL MACHINE IS STILL IN PRODUCTION 15 HP MAIN PUMP 50HZ 1HP 3HP LOWER N UNLOADING QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: P-1997 BABCOCK STENTER FRAMES YEAR 1995 and 1997 WIDTH 1800mm 8 CHAMBERS BABCOCK STENTER FRAMES YEAR: 1995 and 1997 MADE: GERMANY WORKING WIDTH: 1800mm 8 CHAMBERS OIL HEATED MAXIMUM WIDTH: 2 METERS WORKING WITH PIN CHAIN (HORIZONTAL) MAHLO WEFT STRAIGHTENER PADDER LIKE NEW IN EXCELLENT RUNNING CONDITION WITH WEFT STRAIGHTENER 380 VOLTS, 50 HERTZ STENTERS ARE HIGHLY SUITABLE FOR KNIT FABRICS AS WELL AS WOVEN DELIVERY IMMEDIATELY QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: P-1851 BRAZZOLI SIRIO HT 400 HIGH TEMPERATURE LONG TUBE JET YEAR 2002 BRAZZOLI TYPE: SIRIO HT 400 HIGH TEMPERATURE LONG TUBE JET YEAR: 2002 2 TUBES EACH (TOTALLY IN 2 MACHINES 4 TUBES: 2 TUBE + 2 TUBE CAN WORK INDIVIDUALLY OR SIMULTANEOUSLY) EACH TUBE CAPACITY: 200 KILOGRAMS WORKING TEMPERATURE: 151 FEET C WORKING PRESSURE: 4 BARS COMPLETE WITH MIXING TANK WITH AGITATOR AND STOCK TANK INVERTER AND PLC CONTROL QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: P-1852 BRAZZOLI SIRIO HT 400 HIGH TEMPERATURE LONG TUBE JET YEAR 2001 BRAZZOLI TYPE: SIRIO HT 400 HIGH TEMPERATURE LONG TUBE JET YEAR: 2001 2 TUBES EACH TUBE CAPACITY: 200 KILOGRAMS WORKING TEMPERATURE: 151 FEET C WORKING PRESSURE: 4 BARS COMPLETE WITH MIXING TANK WITH AGITATOR AND STOCK TANK INVERTER AND PLC CONTROL QUANTITY AVAILABLE: 1 Learn More