Search results for: 'MACHINE+S'

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-5344 (220RCBAXX1) L SANTEX SANTASTRETCH DOUBLE PADDING SQUEEZER YEAR 2005 SANTEX SANTASTRETCH SWISS DOUBLE PADDING SQUEEZER MACHINE YEAR 2005 MODEL BALOON SQUEEZER ENTRY UNIT WITH TURN TABLE DE-TWISTER WITH 1ST PADDING MANGLE 2ND SQUEEZER WITH CHEMICAL WASHING TANK MAGNETIC STRETCHER EXIT WITH CONVEYOR WIDTH: 1400mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5350 (220LWGPXX1) L BRUCKNER MULTILAYER STENTER FOR KNIT AND WOVEN FABRIC YEAR 1995 WIDTH 2200mm MULTILAYER STENTER MACHINE FOR KNITTING FABRIC AND WOVEN FABRIC MANUFACTURE: BRUECKNER YEAR: 1995 WORKING WIDTH: 2200mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5012 (1212YBZTXX11) L TMT PF-1593 MULTIPROGRAM AUTOCLAVE DECATIZING MACHINE YEAR 1998 AUTOCLAVE DECATIZING MACHINE MANUFACTURER: TMT MODEL: PF 1593 MULTIPROGRAM YEAR OF CONSTRUCTION: 1998 AUTOCLAVE DIAMETER: 1500mm SATIN CLOTH WIDTH: 1800mm SATIN CLOTH LENGTH STANDARD: 750 TO 1,000 MT. MAXIMUM FABRIC WIDTH: 1600mm POWER INSTALLED: 48 KW POWER USED: 30 KW STEAM PRESSURE: 6 TO 11 BAR COMPRESSED AIR PRESSURE: 6 TO 8 BAR MACHINE IS IN EXCELLENT CONDITION AND IS RUNNING AVAILABLE END OF DECEMBER 2014 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1272 (0101GHBXX12) A= LASER ENGRAVING MACHINE FOR FABRIC OT-LAS MODEL GOAL 500 WORKING WIDTH 1500 MM MANUFACTURER OT-LAS MODEL GOAL 500 CONSTRUCTION YEAR 2004 USEFUL WORKING WIDTH 1600 MM (SUITABLE FOR FINISHED FABRICS, WHICH GENERALLY HAVE A WIDTH OF 150/152 CM.) FEEDING AND DELIVERY OF THE FABRIC FROM SMALL ROLL QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER:P-8699

TWO HEADS WEIGHING PACKING MACHINE

 

POWER SUPPLY: 220V 50/60Hz 500W

WEIGHTING RANGE: 50 TO 2000G

ACCURACY ≤±1g

HOPPER VOLUME: 60L

PACKING SPEED: 10 TO 20 BAG/MIN

MACHINE SIZE: 630X530X1660mm

MACHINE WEIGHT: 150KG

CAPACITY: 3 TO 4M³/H (CAN BE ADJUSTED)

VOLUME OF HOPPER: 0.15 M³

LIFTING HEIGHT: 1.9M (OR AS YOUR CUSTOMIZE)

VOLTAGE: AC 380V/500W

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: T-1139

OBEM HANKS CABINET DYEING MACHINE, YEAR 1989 RECONDITIONED 2017

 

HANKS CABINET DYEING MACHINE

UNDER PRESSURE TEMPERATURE 110°C

WITH EXTRACTABLES BASKETS

BRAND OBEM

TYPE MBC 350/06/CE

YEAR 1989 FULLY RECONDITIONED 2017

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-2194 FONGS LONG TUBE HTHP DYEING MACHINES YEAR 2005 FONGS LONG TUBE HTHP DYEING MACHINES YEAR: 2005 10 x TWO-TUBES, 500 KILOGRAMS 4 x TWO-TUBES, 400 KILOGRAMS 4 x ONE-TUBE, 200 KILOGRAMS ECO 8 D2T ALL MACHINES ARE STOPPED QUANTITY AVAILABLE: 22 Learn More

REFERENCE NUMBER: C-2171 BRAZZOLI HT ROPE DYEING MACHINE, CAPACITY 800 KGS, YEAR 2001 DETAILS: BRAZZOLI 140°C HT ROPE DYEING MACHINE 4.5 BAR LOW LIQUOR RATIO (FROM 1/6 TO 1/8) TYPE SIRIO HT 800 4 TUBES CAPACITY: 800 KGS YEAR: 2001 TURBOVARIO DEVICE VARIABLE BATH PASSAGE CROSS SECTION THAT GUARANTEES HIGH PRODUCTION SPEEDS AT VERY LOW OPERATING PRESSURE SEAM DETECTOR 2 DYE STUFF TANKS AUXILIARY CHEMICAL PRODUCT TANK ANALOG DOSING SYSTEM MAGNETIC LEVEL CONTROL LITRE COUNTER HIGH THERMAL GRADIENT HEAT EXCHANGER MICROPROCESSOR FOR COMPLETE TREATMENT CYCLE CONTROL REMOVABLE FILTER MODULAR CONTROL BOARD MAXIMUM FABRIC SPEED 600 MTS/MIN EXTREME VERSATILITY OF THIS MACHINE ALLOWS TO PROCESS ANY KIND OF FABRIC BOTH WOVEN AND KNITTED FROM A WEIGHT OF 50 GRMS/MT TO 800 GRMS/MT PROGRAMMER APC504 BY AREL NOZZLES: 80 TO 90mm QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: M-5337 (220DBSWXX1) L THIES ECOSOFT HTHP DYEING MACHINE YEAR 2000 – 1080KG THIES GERMANY HTHP DYEING MACHINE MODEL ECOSOFT YEAR 2000 1080KG SETEX 737 CONTROLLER DOUBLE DOSING TANKS MACHINE IS IN RUNNING CONDITION QUANTITY AVAILABLE: 1 Learn More