Search results for: 'g'"''

P-2410 JAUSTROMAQUINAS ROTARY PRINT 72 INCHES WIDE 2 COLORS

JAUSTROMAQUINAS
ROTARY PRINT
72 INCHES WIDE
2 COLORS
1 CLOTH SCRAY
SET E & L CLOTH GUIDER
NEW MAGNETIC PRINT ROLLER
DRYER 74 INCHES WIDE CONVEYOR BLANKET WITH 3 PASS
23 FEET LONG HOUSING
GAS FIRED WITH 3 ECLIPSE BURNERS

QUANTITY: 1

M-6503 LEMAIRE MZV-1800 CALENDER

CALENDER MACHINE
MAKE: LEMAIRE
MODEL: MZV 1800

CONDITION: GOOD

QUANTITY: 1

H-1159 KUSTERS CONTINUOUS OPEN WIDTH MERCERIZING RANGE 1800mm

WIDTH OF FABRIC: 960mm TO 1800mm
ROLLER SURFACE WIDTH: 2000mm
DRIVE SIDE: LEFT SIDE
OPERATING SIDE: FAR SIDE
PRODUCTION SPEED: 60 METERS PER MINUTE
TECHNICAL SPEED: 80 METERS PER MINUTE
WATER PRESSURE: 2.0 ± 0.5 BAR CONSTANT, TO BE PROVIDED LOCALLY
VAPOR PRESSURE: 3.0 ± 0.5 BAR WET STEAM, TO BE PROVIDED LOCALLY
AIR PRESSURE (FREE OF OIL AND WATER): 7 BAR, TO BE PROVIDED LOCALLY
TYPES OF FABRICS: WOVEN
QUALITY OF FABRIC: COTTON, BLENDS, VOILE (DRY)
FABRIC WEITER: 65 TO 300 GRAMS PER SQUARE METER

HIGH-EFFICIENCY PADDER TYPE 222.50
LINE FORCE: 50 N/mm (50 kp/cm)

HIGH-EFFICIENCY PADDER TYPE 824.27
LINE FORCE (MAX.): 50 N/mm

HIGH-EFFICIENCY PADDER TYPE 824.22
LINE FORCE (MAX.): 50 N/mm

MAANDER TYPE 834.43
FABRIC CONTENT: 15 METERS

SQUEEZER TYPE 225.65
LINE FORCE: 10 N/mm

MAANDER TYPE 834.43
FABRIC CONTENT: 15 METERS

SQUEEZER TYPE 225.65
LINE FORCE: 10 N/mm

QUANTITY: 1

B-1120 NOSEDA BEAM DYEING MACHINE, 4100 mm, YEAR 1996

NOSEDA
YEAR – 1996
DIAMETER (INTERNAL) – 1200mm
CONTROLLER – TERMOELETTRONICA CT 400
3 TROLLEYS
CAPACITY – 400:500kg
MACHINE IN VERY GOOD CONDITION, ALWAYS USED FOR ACID DYESTUFF, NEVER USED FOR REACTIVE DYESTUFF.

QUANTITY: 1

R-1429 MONFORTS SANFORISER, WIDTH 2400mm

MONFORTS SANFORISER
MAX FABRIC WIDTH: 2400mm
THIS SANFORISER IS EXCEPTIONALLY WELL EQUIPPED
WITH A MAHLO WEFT STRAIGHTENER
AND A 10MT LONG CLIP TENTER
THE RUBBER BELT
WHICH IS IN ALMOST AS NEW CONDITION IS 2460mm WIDE
AND THE PALMER CYLINDER IS 2400mm DIAM.
MAKING IT SUITABLE FOR PROCESSING A WIDE RANGE OF FABRICS FROM LIGHTER WEIGHT APPAREL FABRICS TO DENIM
TWILLS AND BED SHEETINGS
HIGH ENTRANCE FRAME WITH ONE PAIR KF10 GUIDERS ON A SCREWED WIDTH ADJUSTMENT SHAFT
COMPENSATOR AND TENSION CONTROL RAILS
DRIVEN DRAW ROLLER
COMPENSATOR
MAHLO BOW AND SKEW WEFT STRAIGHTENER, 4 HEADS
CLIP TENTER, 10M WITH STEAMING FIELD
RUBBER BELT SHRINKING MACHINE
RUBBER BELT WIDTH 2460mm
PALMER CALENDER WITH 240CM DIAMETER CYLINDER
ENDLESS FELT BLANKET 2470mm WIDE
BLANKET DRYING CYLINDER
COOLING CYLINDER, WATER COOLED
DRAW ROLLERS
SCRAY FOR NON-STOP BATCHING
EXIT FRAME WITH DRAW ROLLER
SURFACE DRIVEN A-FRAME BATCHER AND PLAITER

QUANTITY: 1

P-3903 RAMISCH-KLEINWEFERS COLD PAD BATCH YEAR 1996 WIDTH 2000mm

RAMISCH-KLEINWEFERS
MADE: GERMANY
COLD PAD BATCH
YEAR: 1996
WORKING WIDTH: 2000mm
ENTRY FROM A-FRAME, THROUGH BIANCO OPENING DEVICE WITH COOLING CYLINDER
RAMISCH 2 ROLL PADDER, TYPE BICOFLEX FQ 200, MAXIMUM NIP PRESSURE OF 50daN/cm
EXIT THROUGH BIANCO DEVICE ONTO A-FRAME

QUANTITY: 1

M-6262 RF SYSTEMS TD-85 RADIO FREQUENCY DRYER FOR CONES YEAR 2002

RADIO FREQUENCY DRYER FOR CONES
MAKE: RF SYSTEMS
MODEL: TD-85 (K85)
YEAR: 2002
THREE PHASES 380 – 50 HZ
FOR DIFFERENT VOLTAGE THE MACHINE IS EQUIPPED WITH AUTO TRANSFORMER
THE NOMINAL VOLTAGE SHOULD BE WITHIN 5% (TEMPORARY EXCURSIONS OF +5% AND -5% ARE PERMITTED) OTHERWISE CUSTOMER MUST INSTALL A SUITABLE STABILIZER
MAXIMUM POWER ABSORBED FROM THE MAINS: 130 KVA
MAXIMUM CURRENT ABSORBED: 210 A
GAUGE WIRE: 3x75mm2 + GROUND 50mm2 MINIMUM

GENERATOR
MAXIMUM POWER RADIO FREQUENCY GENERATOR: 85 KW (1 x 85KW)
WORK FREQUENCY: 27 MHZ
COOLING SYSTEM: FORCED AIR
MAXIMUM ROOM TEMPERATURE: TA = 35°C IF HIGHER POWER MUST BE REDUCED
MAXIMUM EXHAUST AIR TEMPERATURE: TU = 85°C
OSCILLATOR: CAVITY TYPE WITH HIGH OVERALL EFFICIENCY
FREQUENCY STABILITY: WITHIN LIMITS
RADIATED FIELD: WITHIN LIMITS
GRID CURRENT WITH NO LOAD: 2.3 A TO 2.5 A
GRID CURRENT MINIMUM WITH FULL LOAD: 1.4 A
TRIODE TYPE: RS 3060 CL
FILAMENT TRIODE VOLTAGE: 10 V + 1% - 3%

BELT – CONVEYOR
MATERIAL: POLYESTER FABRIC
TRACKING: AUTOMATIC
LENGTH: 21600mm
WIDTH: 1750mm
RANGE OF CONVEYOR SPEED: 0 TO 50 M/ORA
ELECTRODE: STANDARD TYPE

PRODUCTIVITY
MAXIMUM EVAPORATING CAPACITY: 90 KG WATER PER HOUR

DIMENSIONS
LENGTH: 9600mm
WIDTH: 2124mm
MAXIMUM HEIGHT: 3400mm
GALLERY LENGTH: 4000mm
INLET LENGTH: 2800mm
OUTLET LENGTH: 2800mm
BELT WIDTH: 1750mm
LOAD HEIGHT: 900mm
MAXIMUM HEIGHT OF INLET TRAP: 300mm

THE DRYER TD85 IS COMPOSED OF ONE UNITY OF 85 KW

SPECIAL REQUIREMENTS ON USING RADIO FREQUENCY DRYER
THE DRYER CAN ACCEPT ONLY HYDROEXTRACT GOODS WITH EVEN MOISTURE CONTENT
POSSIBLE FIRE HAZARD WHEN DEALING WITH UNEXTRACTED PACKAGES
PROPEN HYDROEXTRACTION IS IMPORTANT PRIOR TO RF DRYER
LOAD PRODUCT WITH SAME DIMENSIONS AND SIMILAR MOISTURE CONTENTS
PACKAGE PLACEMENT ON THE BELT. ANY TYPE OF TUBE MAY BE USED IN A CONTINUED RF DRYER
METAL TUBES REQUIRE MOVE CARE IN PLACEMENT ON THE BELT THEN PLASTIC TUBE
METAL TUBES CAN CAUSE SHORT CIRCUITY, OR ARCING, FROM ONE ELECTRODE TO GROUND, WHICH CAN DAMAGE THE BELT OR CAUSE FIRE
PACKAGE WITH METAL TUBES MUST BE PLACED ON THE BELT SO THE METAL IS PARALLEL TO THE ELECTRODES AS SHONS IS TY
THE CONVEYOR SHOULD ALWAYS BE LOADED EVENLY, WITH NO BIG EMPTY GAPS
LOAD AS MUCH AS YOU CAN
GOOD WITH DIFFERENTS SIZE ARE NOT ALLOWED THEY CAN GET BURNS
LOAD A QUANTITY OF GOODS WITH A QUANTITY OF WATER TO REMOVE PER LINEAR METER OF BELT AROUND 5 TO 15 KG PER LINEAR METER OF BELT
THE MACHINE CANNOT ACCEPT METALLIC DYSTUFF (EX.CHROME)
DO NOT ENTER METALLIC PARTS
METALLIC IN THE GALLERY CAUSES ELECTRICAL DISCHARGES WHICH MAY THOROUGHLY RUIN BELT AND SET THE DRYING MATERIAL ON FIRE

QUANTITY: 1

M-6248 SANTEX DRYER YEAR 1997 WIDTH 2400mm

DRYING MACHINE
MAKE: SANTEX
WORKING WIDTH: 2400mm
YEAR: 1997
DOUBLE FOULARD
GAS-HEATED
NUMBER OF ROOMS: 5

MACHINE IS IN VERY GOOD CONDITION

QUANTITY: 1

C-4252 OSTHOFF-SENGE SINGEING MACHINE, WORKING WIDTH 1800mm, YEAR 1992

SINGEING MACHINE
BRAND: OSTHOFF-SENGE GMBH UND CO. KG
YEAR: 1992
WORKING WIDTH: 1800mm
1 X TWO SIDED SINGEING UNIT
TYPE: PK86
2 X BRUSHING UNITS
TYPE: VP87/1
ENTRY FROM BATCHER
EXIT TO BATCHER
STATUS: STOPPED ON MILL FLOOR

QUANTITY: 1

R-1251 MARIO CROSTA CARBON BRUSHING MACHINE SPT / 6, WORKING WIDTH 1850mm, YEAR 2001

MARIO CROSTA CARBON BRUSHING MACHINE
MODEL: SPT / 6
YEAR: 2001
MAX. WORKING WIDTH: 1850mm

QUANTITY: 1