Search results for: 'Dia'

REFERENCE NUMBER: M-4327

BENNINGER ZELL SIZING MACHINE MODEL BEN-SIZETEC WORKING WIDTH 2200mm YEAR 1994

 

BENNINGER ZELL SIZING MACHINE  MODEL BEN - SIZETEC WORKING WIDTH 2200 mm

YEAR  1994, WITH SECTIONAL AND FRACTIONAL SYSTEM.

N° A13715

MODEL  BB-S/ZT4/4/TKD

1 SECTIONAL BEAM UNROLLING DEVICE MODEL SWA WITH LOADING CELL FOR MEASURING

THE OUT GOING TENSION .

ELECTRO PNEUMATIC BREAKING SYSTEM

MAXIMUM BEAM DIAMETER 1000 mm.

1 FRACTIONAL BEAMING UNROLLING DEVICE WITH CAPACITY UP TO 20 POSITIONS

ELECTRO PNEUMATIC BREAKING SYSTEM

1 SIZING BOX MODEL TDK WORKING WIDTH 2200 mm. TOTAL WIDTH 2400 mm

STAINLESS STEEL BOX WITH TOTAL CAPACITY OF 240 LITERS WITH DIRECT STEAM INJECTION

LOWER VESSELS WITH INDIRECT HEAT SYSTEM

AUTOMATIC SIZE BOX FEEDING

HANDYMAT FOR START AND STOP AND MACHINE REGULATION

1 DRYING SECTION DEVICE MODEL ZT8 – WORKING WIDTH 2200 mm

6 DRYING STAINLESS STEEL CYLINDERS COVERED WITH TEFLON + 2 CYLINDERS WITHOUT TEFLON

4 ELECTRONIC TEMPERATURE REGULATIONS

2 AIR EXTRACTION

1 OIL/GREASE APPLICATION DEVICE MODEL CV

1 YARN SPLITTING DEVICE

7 RODS FOR SECTIONAL BEAMS

19 RODS FOR FRACTIONAL BEAMS

1 HUMIDITY MAHLO CONTROL DEVICE MODEL RMS-7S N°1670/1/10597

1 BEAM ROLLING DEVICE MODEL BB FOR BEAMS UP TO 1000 mm DIAMETER

YARN TRACTION MADE UP OF 3 ROLLS

1 PRESSURIZED ROLLER DEVICE

TENSION AND PRESSURE MEASURE DEVICES

AUTOMATIC BEAM LIFT DEVICE INCLUSIVE OF ADAPTORS FOR DIFFERENT BEAMS

EXTENSION REED FOR ENDS WIDTH CONTROL

MIRROR FOR EASY YARN CONTROL

1 HANDYMAT FOR START AND STOP AND MACHINE REGULATION

1 DUST SUCTION DEVICE

1 COMPLETE SIZE KITCHEN PREPARATION INCLUDING 2 TANKS FOR SIZE STORAGE

1 FULLY AUTOMATIC BENSIZETEC PROCESS CONTROL DEVICE INCLUDING HARDWARE AND SOFTWARE

1 EXTERNAL ELECTRIC CABINET.

Learn More

REFERENCE NUMBER: C-2257 SUCKER MÜLLER AND KARL MAYER ROTAL SIZING MACHINE COMPRISING OF WARP BEAM UNWINDING CREEL, YEAR: 1985 MODIFIED 2010 DETAILS: MAKER: SUCKER MÜLLER AND KARL MAYER ROTAL YEAR: 1985 YEAR MODIFIED: 2010 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: V-0046 AUTOMATIC ROLL SHRINK PACKING MACHINE MODEL ARPM-240I QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-0551 (88048QDJ7RC) MONFORTS SANFORIZING MACHINE YEAR 1992 WIDTH 2000mm MONFORTS SANFORIZING MACHINE YEAR: 1992 TYPE: MONFORTEX MODEL: E.U.A KOMBI WIDTH: 2000mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1861 (1313235MKD12RX) SANTEX PRE-TREATMENT AND WASHING MACHINE TYPE ACTIWASH YEAR 2002 DESIGNED FOR LOW-TENSION PRE-TREATMENT OF WOVEN AND KNITTED GOODS MANUFACTURER: SANTEX - SWITZERLAND YEAR OF MANUFACTURE: 2002 WORKING WIDTH: 2200/1800 mm SPEED OF MACHINE: 3-100 M/MIN PRODUCTION SPEED: APPROX. 75 M/MIN THE DAILY OUTPUT WILL DEPEND E.G. ON QUALITY AND WEIGHT OF FABRICS/KNIT GOODS YOU WILL WASH ON THESE MACHINES. SO FAR THE PLANT WAS RUNNING AT AN AVERAGE SPEED OF 40 M/MIN, I.E. 2,400 MTRS PER WORKING HOUR. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1861 (770235KOL6RX) SANTEX PRE-TREATMENT AND WASHING MACHINE TYPE ACTIWASH YEAR 2002 DESIGNED FOR LOW-TENSION PRE-TREATMENT OF WOVEN AND KNITTED GOODS MANUFACTURER: SANTEX - SWITZERLAND YEAR OF MANUFACTURE: 2002 WORKING WIDTH: 2200/1800 mm SPEED OF MACHINE: 3-100 M/MIN PRODUCTION SPEED: APPROX. 75 M/MIN THE DAILY OUTPUT WILL DEPEND E.G. ON QUALITY AND WEIGHT OF FABRICS/KNIT GOODS YOU WILL WASH ON THESE MACHINES. SO FAR THE PLANT WAS RUNNING AT AN AVERAGE SPEED OF 40 M/MIN, I.E. 2,400 MTRS PER WORKING HOUR. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5285 (1313JCMNXX12RC) L TEPA JTE-1500 ELECTRONIC ATMOSPHERIC JIGGER YEAR 2001 TEPA ELECTRONIC JIGGER MODEL JTE-1500 TYPE 13000 (ATMOSPHERIC) YEAR 2001 FACE ROLLER WIDTH: 2400mm WORKING WIDTH: 3200mm MAXIMUM WINDING DIAMETER: 1500mm MINIMUM WINDING DIAMETER: 500mm ELECTRONIC DRIVE WITH LENZE INVERTERS SETEX 838 DYE CYCLE CONTROLLER AUTOMATIC DEVICE FOR CENTERING THE FABRIC DURING THE LOAD VAT MAXIMUM CAPACITY 2530 L RUNNING SPEED 20 TO 180 M/MIN FABRIC CAPCITY = 1570/FABRIC THICKNESS IN mm 2 ADDITIONAL VATS EACH 500 L CAPACITY, WITH MIXERS AND ADDITIONAL PUMP WITH BOX FILTER 2 DRAIN VALVES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-1518 ROLLER CUTTER FOR SALE: MODEL 120X12 THIS IS A MANUAL MACHINE WITH WORKING WIDTHS UP TO 3000mm (120") AND ALLOWS THE USER TO CUT ROLLS UP TO 300mm (12") DIAMETER CUTS DOWN TO 1 AND 2 INCHES IN WIDTH DEPENDING ON FABRIC DIAMETER OF THE BLADE: 500mm WEIGHT: 1500 LBS. BLADE SURFACE SPEED 520 FEET PER MINUTE ROLLERS SURFACE SPEED : 200 FEET PER MINUTE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5161 (12129KQBJ11RX) L MCS HT COMBI-JIGGER YEAR 1996 MCS JIGGER HIGH TEMPERATURE 144°C TYPE COMBI-JIGGER JP70 YEAR 1996 HYDRAULIC SYSTEM ROLLER WIDTH 3600mm DIAMETER OF FABRIC 1100mm DIAMETER OF ROLLERS 400mm TERMOELETTRONICA PROGRAMMER ADITIVES TANK QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-6324 CIBITEX SANFORIZING MACHINE 3200mm YEAR 1994 MAKE: CIBITEX WIDTH: 3200mm QUANTITY AVAILABLE: 1 Learn More