Search results for: 'Fabric dr'

REFERENCE NUMBER: J-0031 (131314MJKL12R) BRUCKNER DOUBLE LAYER STENTER YEAR 1998 WIDTH 2200mm – 8 CHAMBERS QUANTITY AVAILABLE: 1 Learn More

- MANUFACTURER BENNINGER - YEAR OF CONSTRUCTION 1991 - ROLLERS WIDTH 2.000 mm - WORKING WIDTH 1.800 mm Learn More

H-1159 KUSTERS CONTINUOUS OPEN WIDTH MERCERIZING RANGE 1800mm

WIDTH OF FABRIC: 960mm TO 1800mm
ROLLER SURFACE WIDTH: 2000mm
DRIVE SIDE: LEFT SIDE
OPERATING SIDE: FAR SIDE
PRODUCTION SPEED: 60 METERS PER MINUTE
TECHNICAL SPEED: 80 METERS PER MINUTE
WATER PRESSURE: 2.0 ± 0.5 BAR CONSTANT, TO BE PROVIDED LOCALLY
VAPOR PRESSURE: 3.0 ± 0.5 BAR WET STEAM, TO BE PROVIDED LOCALLY
AIR PRESSURE (FREE OF OIL AND WATER): 7 BAR, TO BE PROVIDED LOCALLY
TYPES OF FABRICS: WOVEN
QUALITY OF FABRIC: COTTON, BLENDS, VOILE (DRY)
FABRIC WEITER: 65 TO 300 GRAMS PER SQUARE METER

HIGH-EFFICIENCY PADDER TYPE 222.50
LINE FORCE: 50 N/mm (50 kp/cm)

HIGH-EFFICIENCY PADDER TYPE 824.27
LINE FORCE (MAX.): 50 N/mm

HIGH-EFFICIENCY PADDER TYPE 824.22
LINE FORCE (MAX.): 50 N/mm

MAANDER TYPE 834.43
FABRIC CONTENT: 15 METERS

SQUEEZER TYPE 225.65
LINE FORCE: 10 N/mm

MAANDER TYPE 834.43
FABRIC CONTENT: 15 METERS

SQUEEZER TYPE 225.65
LINE FORCE: 10 N/mm

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-5285 (1313JCMNXX12RC) L TEPA JTE-1500 ELECTRONIC ATMOSPHERIC JIGGER YEAR 2001 TEPA ELECTRONIC JIGGER MODEL JTE-1500 TYPE 13000 (ATMOSPHERIC) YEAR 2001 FACE ROLLER WIDTH: 2400mm WORKING WIDTH: 3200mm MAXIMUM WINDING DIAMETER: 1500mm MINIMUM WINDING DIAMETER: 500mm ELECTRONIC DRIVE WITH LENZE INVERTERS SETEX 838 DYE CYCLE CONTROLLER AUTOMATIC DEVICE FOR CENTERING THE FABRIC DURING THE LOAD VAT MAXIMUM CAPACITY 2530 L RUNNING SPEED 20 TO 180 M/MIN FABRIC CAPCITY = 1570/FABRIC THICKNESS IN mm 2 ADDITIONAL VATS EACH 500 L CAPACITY, WITH MIXERS AND ADDITIONAL PUMP WITH BOX FILTER 2 DRAIN VALVES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-0716 THERMOSOL DYEING MACHINE YEAR 2005 WIDTH 3200mm THERMOSOL DYEING MACHINE YEAR 2005 ROLLER WIDTH 3400mm WORKING WIDTH 3200mm QUANTITY AVAILABLE: 1 Learn More

M-6262 RF SYSTEMS TD-85 RADIO FREQUENCY DRYER FOR CONES YEAR 2002

RADIO FREQUENCY DRYER FOR CONES
MAKE: RF SYSTEMS
MODEL: TD-85 (K85)
YEAR: 2002
THREE PHASES 380 – 50 HZ
FOR DIFFERENT VOLTAGE THE MACHINE IS EQUIPPED WITH AUTO TRANSFORMER
THE NOMINAL VOLTAGE SHOULD BE WITHIN 5% (TEMPORARY EXCURSIONS OF +5% AND -5% ARE PERMITTED) OTHERWISE CUSTOMER MUST INSTALL A SUITABLE STABILIZER
MAXIMUM POWER ABSORBED FROM THE MAINS: 130 KVA
MAXIMUM CURRENT ABSORBED: 210 A
GAUGE WIRE: 3x75mm2 + GROUND 50mm2 MINIMUM

GENERATOR
MAXIMUM POWER RADIO FREQUENCY GENERATOR: 85 KW (1 x 85KW)
WORK FREQUENCY: 27 MHZ
COOLING SYSTEM: FORCED AIR
MAXIMUM ROOM TEMPERATURE: TA = 35°C IF HIGHER POWER MUST BE REDUCED
MAXIMUM EXHAUST AIR TEMPERATURE: TU = 85°C
OSCILLATOR: CAVITY TYPE WITH HIGH OVERALL EFFICIENCY
FREQUENCY STABILITY: WITHIN LIMITS
RADIATED FIELD: WITHIN LIMITS
GRID CURRENT WITH NO LOAD: 2.3 A TO 2.5 A
GRID CURRENT MINIMUM WITH FULL LOAD: 1.4 A
TRIODE TYPE: RS 3060 CL
FILAMENT TRIODE VOLTAGE: 10 V + 1% - 3%

BELT – CONVEYOR
MATERIAL: POLYESTER FABRIC
TRACKING: AUTOMATIC
LENGTH: 21600mm
WIDTH: 1750mm
RANGE OF CONVEYOR SPEED: 0 TO 50 M/ORA
ELECTRODE: STANDARD TYPE

PRODUCTIVITY
MAXIMUM EVAPORATING CAPACITY: 90 KG WATER PER HOUR

DIMENSIONS
LENGTH: 9600mm
WIDTH: 2124mm
MAXIMUM HEIGHT: 3400mm
GALLERY LENGTH: 4000mm
INLET LENGTH: 2800mm
OUTLET LENGTH: 2800mm
BELT WIDTH: 1750mm
LOAD HEIGHT: 900mm
MAXIMUM HEIGHT OF INLET TRAP: 300mm

THE DRYER TD85 IS COMPOSED OF ONE UNITY OF 85 KW

SPECIAL REQUIREMENTS ON USING RADIO FREQUENCY DRYER
THE DRYER CAN ACCEPT ONLY HYDROEXTRACT GOODS WITH EVEN MOISTURE CONTENT
POSSIBLE FIRE HAZARD WHEN DEALING WITH UNEXTRACTED PACKAGES
PROPEN HYDROEXTRACTION IS IMPORTANT PRIOR TO RF DRYER
LOAD PRODUCT WITH SAME DIMENSIONS AND SIMILAR MOISTURE CONTENTS
PACKAGE PLACEMENT ON THE BELT. ANY TYPE OF TUBE MAY BE USED IN A CONTINUED RF DRYER
METAL TUBES REQUIRE MOVE CARE IN PLACEMENT ON THE BELT THEN PLASTIC TUBE
METAL TUBES CAN CAUSE SHORT CIRCUITY, OR ARCING, FROM ONE ELECTRODE TO GROUND, WHICH CAN DAMAGE THE BELT OR CAUSE FIRE
PACKAGE WITH METAL TUBES MUST BE PLACED ON THE BELT SO THE METAL IS PARALLEL TO THE ELECTRODES AS SHONS IS TY
THE CONVEYOR SHOULD ALWAYS BE LOADED EVENLY, WITH NO BIG EMPTY GAPS
LOAD AS MUCH AS YOU CAN
GOOD WITH DIFFERENTS SIZE ARE NOT ALLOWED THEY CAN GET BURNS
LOAD A QUANTITY OF GOODS WITH A QUANTITY OF WATER TO REMOVE PER LINEAR METER OF BELT AROUND 5 TO 15 KG PER LINEAR METER OF BELT
THE MACHINE CANNOT ACCEPT METALLIC DYSTUFF (EX.CHROME)
DO NOT ENTER METALLIC PARTS
METALLIC IN THE GALLERY CAUSES ELECTRICAL DISCHARGES WHICH MAY THOROUGHLY RUIN BELT AND SET THE DRYING MATERIAL ON FIRE

QUANTITY: 1

Learn More

R-1321 KUSTER CONTINUOUS OPEN WIDTH MERCERIZING, ROLLER SURFACE WIDTH 2000mm

DETAILS:
KUSTER CONTINUOUS OPEN WIDTH MERCERIZING
FOR THE PRETRATMENT OF WOVEN FABRICS
WIDTH OF FABRIC (WB): 960 TO 1800mm
ROLLER SURFACE WIDTH: 2000mm
DRIVE SIDE: LEFT SIDE
OPERATING SIDE: FAR SIDE
PRODUCTION SPEED: 60 M/MIN
TECHNICAL SPEED: 80 M/MIN
WATER PRESSURE: 2.0 + 0.5 BAR CONSTANT TO BE PROVIDED LOCALTY
VAPOUR PRESSURE: 3.0 + 0.5 BAR WET STEAM TO BE PROVIDED LOCALTY
AS PRESSURE (FREE OF OIL AND WATER): 7 BAR, TO BE PROVIDED LOCALTY
TYPE OF FABRICS: WOVEN FABRICS
QUALITY OF FABRICS: COTTON, BLENDS, VOISE (DRY)
FABRIC WEIGHT: 65 TO 300 G/M
HIGH-EFFICIENCY PADDER TYPE 222.50 LINE FORCB: 50 N/mm (50KP/CM)
HIGH-EFFICIENCY PADDER TYPE 824.27 LINE FORCE MAX: 50 N/mm
HIGH-EFFICIENCY PADDER TYPE 824.22 LINE FORCE MAX: 50 N/mm
MAANDER TYPE 834.43 FABRICS CONTENT: 15 m
SQUEEZER TYPE 225.65 LINE FORCB: 10 N/mm
MAANDER TYPE 834.43 FABRICS CONTENT: 15 m
SQUEEZER TYPE 225.65 LINE FORCB: 10 N/mm
STILL RUNNING IN MILLS

QUANTITY: 1

Learn More

R-1412 THIES “LUFT-ROTO PLUS SII" FABRIC JET DYEING MACHINE 140/2 TUBES – PL, YEAR 2008

THIES “LUFT-ROTO PLUS SII" FABRIC JET DYEING MACHINE
TYPE: 140/2 TUBES – PL
YEAR: 2008
NOMINAL CAPACITY: APPROX. 250 KG/DRUM PER MACHINE
CAPACITY PER MACHINE: APPROX. 500 KG
TOTAL NOMINAL CAPACITY: APPROX. 1000 KG
LIQUOR RATIO: MIN. 1:3
OPERATING TEMPERATURE: 140 °C

QUANTITY: 2

Learn More

REFERENCE NUMBER: M-5983 (880BGSDXX7) L BABCOCK WASHING RANGE WITH 6 CHAMBERS YEAR 1999 WIDTH 2000mm WASHING RANGE MAKE: BABCOCK WORKING WIDTH: 2000mm YEAR: 1999 6 CHAMBERS (WITH DRUM AND PULVERIZED WASHING SYSTEM – 3 CHAMBERS/1 PADDING MANGLE/3 CHAMBERS) ENTRANCE ZÖLLIG FROM BIG BATCH OR CARRIER FABRIC RELAXATION SYSTEM BIANCO CENTERING DEVICE AND FABRIC OPENER PADDING BANGLE EXIT BIG BATCHER OR PLAITING QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-1146 TEXIMA TENSIONLESS DRYER 3000mm YEAR 1991 MAKE: TEXIMA DIMENSIONS (L X W): 3000mm X 6000mm YEAR 1991 2 SECTIONS (6 METERS TOTAL LENGTH) 18 METERS OF FABRIC IN THE CABINETS ROLLS ARE MECHANICAL (NOT MOTOR DRIVEN) THE FABRIC MUST BE PULLED WITH ANOTHER MACHINE IN FRONT OF THE DRYER CAN BE CONNECTED TO OIL HEAT QUANTITY AVAILABLE: 1 Learn More