Search results for: 'Rolls+r'

J-0102 JOHN VERDUIN CALENDAR 68” WIDE

68” WIDE
2 ROLLS
20 TON PRESSURE

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-0681

GUARNERI CALENDER FOR WOVEN FABRICS YEAR 1996 -3200mm - 4 BOWLS

 

GUARNERI CALENDER FOR WOVEN FABRICS

TYPE: E.470

YEAR 1996

FABRIC WIDTH: 3200mm

ROLLER WIDTH: 3400mm

4 BOWLS, CHROMED HEATED+RECALON+RECALON+CHROMED HEATED

HYDRAULIC PRESSURE UPTO 100 TONS

METAL DETECTOR, SEAM DETECTOR

EXIT WITH MOTORIZED BATCHER

380 V, 3 PHASES, 50 HZ, 50 KW

MAX TEMPERATURE: 200°C ON THE ROLLS

STEAM HEATED

MACHINE STOPPED/INSTALLED

 

QUANTITY: 1

Learn More

TT-2812 MATHERM CERATHERM SP INFRA-RED DRYING UNIT, WORKING WIDTH 2400mm, YEAR 2010 QUANTITY: 1 Learn More

T-9682 KUSTERS PAD BATCH DYEING MACHINE, WORKING WIDTH 2400mm, YEAR 2004 ENTRY FROM PLAITER OR BATCHER EXIT TO BATCHER QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6818 BRUCKNER STENTER FOR HIGH QUALITY KNITTED FABRICS, WIDTH 2400mm, YEAR 1998 BRUCKNER STENTER FOR HIGH QUALITY KNITTED FABRICS YEAR 1998 6 CHAMBERS GAS HEATED WIDTH 2400mm VERTICAL PIN CHAIN WITH ANTI-DEPINNING UNIT CORINO PADDER CORINO WEFT STRAIGHTENER GLUEING DEVICE FOR SELVEDGE WITH DRYER AND CUTTER ENTRY FROM A-FRAME OR TROLLEY ENTRY WITH STEAMER DELIVERY TO A-FRAME, PLAITER INCLUDES TOO CORINO ROLLER (WITH INPECTION TABLE TO PREPARE FABRIC SMALL ROLLS) DELIVERY WITH COOLING DEVICE MACHINE RUNNING IN PERFECT CONDITION WONDERFUL STATUS MACHINE WORKING FOR BIG BRANDS LIKE ADIDAS, NIKE, LACOSTE ... QUANTITY: 1 Learn More

REFERENCE NUMBER: M-4327

BENNINGER ZELL SIZING MACHINE MODEL BEN-SIZETEC WORKING WIDTH 2200mm YEAR 1994

 

BENNINGER ZELL SIZING MACHINE  MODEL BEN - SIZETEC WORKING WIDTH 2200 mm

YEAR  1994, WITH SECTIONAL AND FRACTIONAL SYSTEM.

N° A13715

MODEL  BB-S/ZT4/4/TKD

1 SECTIONAL BEAM UNROLLING DEVICE MODEL SWA WITH LOADING CELL FOR MEASURING

THE OUT GOING TENSION .

ELECTRO PNEUMATIC BREAKING SYSTEM

MAXIMUM BEAM DIAMETER 1000 mm.

1 FRACTIONAL BEAMING UNROLLING DEVICE WITH CAPACITY UP TO 20 POSITIONS

ELECTRO PNEUMATIC BREAKING SYSTEM

1 SIZING BOX MODEL TDK WORKING WIDTH 2200 mm. TOTAL WIDTH 2400 mm

STAINLESS STEEL BOX WITH TOTAL CAPACITY OF 240 LITERS WITH DIRECT STEAM INJECTION

LOWER VESSELS WITH INDIRECT HEAT SYSTEM

AUTOMATIC SIZE BOX FEEDING

HANDYMAT FOR START AND STOP AND MACHINE REGULATION

1 DRYING SECTION DEVICE MODEL ZT8 – WORKING WIDTH 2200 mm

6 DRYING STAINLESS STEEL CYLINDERS COVERED WITH TEFLON + 2 CYLINDERS WITHOUT TEFLON

4 ELECTRONIC TEMPERATURE REGULATIONS

2 AIR EXTRACTION

1 OIL/GREASE APPLICATION DEVICE MODEL CV

1 YARN SPLITTING DEVICE

7 RODS FOR SECTIONAL BEAMS

19 RODS FOR FRACTIONAL BEAMS

1 HUMIDITY MAHLO CONTROL DEVICE MODEL RMS-7S N°1670/1/10597

1 BEAM ROLLING DEVICE MODEL BB FOR BEAMS UP TO 1000 mm DIAMETER

YARN TRACTION MADE UP OF 3 ROLLS

1 PRESSURIZED ROLLER DEVICE

TENSION AND PRESSURE MEASURE DEVICES

AUTOMATIC BEAM LIFT DEVICE INCLUSIVE OF ADAPTORS FOR DIFFERENT BEAMS

EXTENSION REED FOR ENDS WIDTH CONTROL

MIRROR FOR EASY YARN CONTROL

1 HANDYMAT FOR START AND STOP AND MACHINE REGULATION

1 DUST SUCTION DEVICE

1 COMPLETE SIZE KITCHEN PREPARATION INCLUDING 2 TANKS FOR SIZE STORAGE

1 FULLY AUTOMATIC BENSIZETEC PROCESS CONTROL DEVICE INCLUDING HARDWARE AND SOFTWARE

1 EXTERNAL ELECTRIC CABINET.

Learn More

REFERENCE NUMBER: K-1146 TEXIMA TENSIONLESS DRYER 3000mm YEAR 1991 MAKE: TEXIMA DIMENSIONS (L X W): 3000mm X 6000mm YEAR 1991 2 SECTIONS (6 METERS TOTAL LENGTH) 18 METERS OF FABRIC IN THE CABINETS ROLLS ARE MECHANICAL (NOT MOTOR DRIVEN) THE FABRIC MUST BE PULLED WITH ANOTHER MACHINE IN FRONT OF THE DRYER CAN BE CONNECTED TO OIL HEAT QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-4610 ROLL CUTTER EQUIPPED WITH: MOVEABLE CUTTING ASSEMBLY IN-CEILING WITH DOUBLE FLWHEEL FOR ADJUSTING AND LOCKING. ADJUSTING SWING THE MEASURE TO MAKE CUTS ACCURATE AND UNIFORM. LOCKING LEVER TISSUE WHICH GREATLY FACILITATES THE CUTTING OF REELS OF SMALL SIZE. SECURITY COMMAND FOR ROTATING ROLLERS MOUNTED DIRECTLY ON THE BLADE LEVER. CUT ROLLS UP TO A LENGTH OF 3.50 METERS. DISK DIAMETER 500mm HIGH RESISTANCE. AUTOMATIC COOLING OF THE BLADE. DOUBLE SHARPENING PNEUMATIC HIGH SPEED WITH CONE WHEEL ACTING ON BOTH SIDES OF OBTAINING A SHARP BLAST. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-1518 ROLLER CUTTER FOR SALE: MODEL 120X12 THIS IS A MANUAL MACHINE WITH WORKING WIDTHS UP TO 3000mm (120") AND ALLOWS THE USER TO CUT ROLLS UP TO 300mm (12") DIAMETER CUTS DOWN TO 1 AND 2 INCHES IN WIDTH DEPENDING ON FABRIC DIAMETER OF THE BLADE: 500mm WEIGHT: 1500 LBS. BLADE SURFACE SPEED 520 FEET PER MINUTE ROLLERS SURFACE SPEED : 200 FEET PER MINUTE QUANTITY AVAILABLE: 1 Learn More

BRAND KLEINWEFERS RAMISCH CALENDER MACHINE STEEL, PAPER, AND INCLUDING 3 ROLLS RAKOL ELECTRIC HEATED QUANTITY AVAILABLE: 1 Learn More