Search results for: 'ver''

B-1120 NOSEDA BEAM DYEING MACHINE, 4100 mm, YEAR 1996

NOSEDA
YEAR – 1996
DIAMETER (INTERNAL) – 1200mm
CONTROLLER – TERMOELETTRONICA CT 400
3 TROLLEYS
CAPACITY – 400:500kg
MACHINE IN VERY GOOD CONDITION, ALWAYS USED FOR ACID DYESTUFF, NEVER USED FOR REACTIVE DYESTUFF.

QUANTITY: 1

Learn More

P-4952 FRATELLI ROSA 300 GARMENT DYEING MACHINES 300KG CAPACITY

FRATELLI ROSA
MODEL: 300
GARMENT DYEING MACHINES
NOMINAL LOAD CAPACITY OF 300 KILOGRAMS
REAL LOAD CAPACITY 150/160 KILOGRAMS
ROTARY DYEING BASKET DIVIDED IN 3 COMPARTMENTS
2 TANKS FOR INTRODUCTION OF DYES AND CHEMICAL PRODUCTS
PROGRAMMER FOR THE DYEING CYCLE
MACHINES IN VERY GOOD CONDITION

QUANTITY: 2

Learn More

M-6248 SANTEX DRYER YEAR 1997 WIDTH 2400mm

DRYING MACHINE
MAKE: SANTEX
WORKING WIDTH: 2400mm
YEAR: 1997
DOUBLE FOULARD
GAS-HEATED
NUMBER OF ROOMS: 5

MACHINE IS IN VERY GOOD CONDITION

QUANTITY: 1

Learn More

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-3848

ARIOLI STENTER FOR KNITS

WORKING WIDTH: 2200mm

VERTICAL PIN CHAIN

4 CHAMBERS

WITH COPROTEX 3 BOWL PADDER

AND BIANCO MANUAL WEFT STRAIGHTENER 

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-2127 BRAZZOLI HT ROPE DYEING MACHINES YEAR 2001 800 KILOGRAMS BRAZZOLI TYPE: HT ROPE DYEING MACHINES YEAR: 2001 140°C 4.55 BAR LOW LIQUOR RATIO (FROM 1/6 to 1/8) TYPE: SIRIO HT 800 4 TUBES 800 KILOGRAMS EACH MACHINE WITH: TURBOVARIO DEVICE (VARIABLE BATH PASSAGE CROSS SECTION THAT GUARANTEES HIGH PRODUCTION SPEEDS AT VERY LOW OPERATING PRESSURE) SEAM DETECTOR 2 DYE STUFF TANKS AUXILLARY CHHEMICAL PRODUCT TANK ANALOG DOSING SYSTEM MAGNETIC LEVEL CONTROL LITRE COUNTER HIGH THERMAL GRADIENT HEAT EXCHANGER MICROPROCESSOR FOR COMPLETE TREATMENT CYCLE CONTROL REMOVABLE FILTER MODULAR CONTROL BOARD MAXIMUM FABRIC SPEED 600 MTS/MIN EXTREME VESATILITY OF THIS MACHINE ALLOWS TO PROCESS ANY KIND OF FABRIC (BOTH WOVEN and KNITTED) FROM A WEIGHT OF 50 GRAMS/MT to 800 GRAMS/MT PROGRAMMER APC504 BY AREL NOZZLES 80 to 90mm QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: C-2171 BRAZZOLI HT ROPE DYEING MACHINE, CAPACITY 800 KGS, YEAR 2001 DETAILS: BRAZZOLI 140°C HT ROPE DYEING MACHINE 4.5 BAR LOW LIQUOR RATIO (FROM 1/6 TO 1/8) TYPE SIRIO HT 800 4 TUBES CAPACITY: 800 KGS YEAR: 2001 TURBOVARIO DEVICE VARIABLE BATH PASSAGE CROSS SECTION THAT GUARANTEES HIGH PRODUCTION SPEEDS AT VERY LOW OPERATING PRESSURE SEAM DETECTOR 2 DYE STUFF TANKS AUXILIARY CHEMICAL PRODUCT TANK ANALOG DOSING SYSTEM MAGNETIC LEVEL CONTROL LITRE COUNTER HIGH THERMAL GRADIENT HEAT EXCHANGER MICROPROCESSOR FOR COMPLETE TREATMENT CYCLE CONTROL REMOVABLE FILTER MODULAR CONTROL BOARD MAXIMUM FABRIC SPEED 600 MTS/MIN EXTREME VERSATILITY OF THIS MACHINE ALLOWS TO PROCESS ANY KIND OF FABRIC BOTH WOVEN AND KNITTED FROM A WEIGHT OF 50 GRMS/MT TO 800 GRMS/MT PROGRAMMER APC504 BY AREL NOZZLES: 80 TO 90mm QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: P-2523 MONFORT MONTEX 5000 STENTER YEAR 2000 WIDTH 2400mm 8 CHAMBERS GAS HEATED MONFORT TYPE: MONTEX 5000 STENTER YEAR: 2000 WIDTH: 2400mm 8 CHAMBERS GAS HEATED ENTRY 6 METERS GUMMING CUTTING DEVICE E+L BIANCO WEFT STRAIGHTNER VERY GOOD CONDITION QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-4610 ROLL CUTTER EQUIPPED WITH: MOVEABLE CUTTING ASSEMBLY IN-CEILING WITH DOUBLE FLWHEEL FOR ADJUSTING AND LOCKING. ADJUSTING SWING THE MEASURE TO MAKE CUTS ACCURATE AND UNIFORM. LOCKING LEVER TISSUE WHICH GREATLY FACILITATES THE CUTTING OF REELS OF SMALL SIZE. SECURITY COMMAND FOR ROTATING ROLLERS MOUNTED DIRECTLY ON THE BLADE LEVER. CUT ROLLS UP TO A LENGTH OF 3.50 METERS. DISK DIAMETER 500mm HIGH RESISTANCE. AUTOMATIC COOLING OF THE BLADE. DOUBLE SHARPENING PNEUMATIC HIGH SPEED WITH CONE WHEEL ACTING ON BOTH SIDES OF OBTAINING A SHARP BLAST. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-1171 MEZZERA + RAMALLUMIN CONTINUOUS WASHING LINE, YEAR 2000, WIDTH 3600mm SPECIFICATIONS: MEZZERA + RAMALLUMIN CONTINUOUS WASHING LINE IN OPEN WIDTH FOR WOVEN FABRIC ROLLERS WIDTH: 3800 MM WORKING WIDTH: 3600 MM YOC: 2000 QUANTITY AVAILABLE: 1 Learn More