Search results for: 'Machin'''

M-6262 RF SYSTEMS TD-85 RADIO FREQUENCY DRYER FOR CONES YEAR 2002

RADIO FREQUENCY DRYER FOR CONES
MAKE: RF SYSTEMS
MODEL: TD-85 (K85)
YEAR: 2002
THREE PHASES 380 – 50 HZ
FOR DIFFERENT VOLTAGE THE MACHINE IS EQUIPPED WITH AUTO TRANSFORMER
THE NOMINAL VOLTAGE SHOULD BE WITHIN 5% (TEMPORARY EXCURSIONS OF +5% AND -5% ARE PERMITTED) OTHERWISE CUSTOMER MUST INSTALL A SUITABLE STABILIZER
MAXIMUM POWER ABSORBED FROM THE MAINS: 130 KVA
MAXIMUM CURRENT ABSORBED: 210 A
GAUGE WIRE: 3x75mm2 + GROUND 50mm2 MINIMUM

GENERATOR
MAXIMUM POWER RADIO FREQUENCY GENERATOR: 85 KW (1 x 85KW)
WORK FREQUENCY: 27 MHZ
COOLING SYSTEM: FORCED AIR
MAXIMUM ROOM TEMPERATURE: TA = 35°C IF HIGHER POWER MUST BE REDUCED
MAXIMUM EXHAUST AIR TEMPERATURE: TU = 85°C
OSCILLATOR: CAVITY TYPE WITH HIGH OVERALL EFFICIENCY
FREQUENCY STABILITY: WITHIN LIMITS
RADIATED FIELD: WITHIN LIMITS
GRID CURRENT WITH NO LOAD: 2.3 A TO 2.5 A
GRID CURRENT MINIMUM WITH FULL LOAD: 1.4 A
TRIODE TYPE: RS 3060 CL
FILAMENT TRIODE VOLTAGE: 10 V + 1% - 3%

BELT – CONVEYOR
MATERIAL: POLYESTER FABRIC
TRACKING: AUTOMATIC
LENGTH: 21600mm
WIDTH: 1750mm
RANGE OF CONVEYOR SPEED: 0 TO 50 M/ORA
ELECTRODE: STANDARD TYPE

PRODUCTIVITY
MAXIMUM EVAPORATING CAPACITY: 90 KG WATER PER HOUR

DIMENSIONS
LENGTH: 9600mm
WIDTH: 2124mm
MAXIMUM HEIGHT: 3400mm
GALLERY LENGTH: 4000mm
INLET LENGTH: 2800mm
OUTLET LENGTH: 2800mm
BELT WIDTH: 1750mm
LOAD HEIGHT: 900mm
MAXIMUM HEIGHT OF INLET TRAP: 300mm

THE DRYER TD85 IS COMPOSED OF ONE UNITY OF 85 KW

SPECIAL REQUIREMENTS ON USING RADIO FREQUENCY DRYER
THE DRYER CAN ACCEPT ONLY HYDROEXTRACT GOODS WITH EVEN MOISTURE CONTENT
POSSIBLE FIRE HAZARD WHEN DEALING WITH UNEXTRACTED PACKAGES
PROPEN HYDROEXTRACTION IS IMPORTANT PRIOR TO RF DRYER
LOAD PRODUCT WITH SAME DIMENSIONS AND SIMILAR MOISTURE CONTENTS
PACKAGE PLACEMENT ON THE BELT. ANY TYPE OF TUBE MAY BE USED IN A CONTINUED RF DRYER
METAL TUBES REQUIRE MOVE CARE IN PLACEMENT ON THE BELT THEN PLASTIC TUBE
METAL TUBES CAN CAUSE SHORT CIRCUITY, OR ARCING, FROM ONE ELECTRODE TO GROUND, WHICH CAN DAMAGE THE BELT OR CAUSE FIRE
PACKAGE WITH METAL TUBES MUST BE PLACED ON THE BELT SO THE METAL IS PARALLEL TO THE ELECTRODES AS SHONS IS TY
THE CONVEYOR SHOULD ALWAYS BE LOADED EVENLY, WITH NO BIG EMPTY GAPS
LOAD AS MUCH AS YOU CAN
GOOD WITH DIFFERENTS SIZE ARE NOT ALLOWED THEY CAN GET BURNS
LOAD A QUANTITY OF GOODS WITH A QUANTITY OF WATER TO REMOVE PER LINEAR METER OF BELT AROUND 5 TO 15 KG PER LINEAR METER OF BELT
THE MACHINE CANNOT ACCEPT METALLIC DYSTUFF (EX.CHROME)
DO NOT ENTER METALLIC PARTS
METALLIC IN THE GALLERY CAUSES ELECTRICAL DISCHARGES WHICH MAY THOROUGHLY RUIN BELT AND SET THE DRYING MATERIAL ON FIRE

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-3851

MONFORTS STENTER FOR KNITS

MODEL: MONTEX 6500 7F TWINAIR

7 CHAMBERS GAS HEATED

WORKING WIDTH: 2200mm

YEAR: 2012

 QUANTITY: 1

Learn More

REFERENCE NUMBER: K-5165 BENNINGER MERCERIZING CONTINUOUS LINE YEAR 2008 - 2000mm MODEL: ML2 DIMENSA-EXTRACTA WORKING WIDTH: 2000mm CYLINDERS WIDTH: 2200mm OVERALL MACHINE LENGTH: AROUND 23M AVERAGE PRODUCTION SPEED: 23-28 M/MIN LH 2000 YEAR: 2008 AVAILABLE FOR FABRICS COTTON 100% WEIGHT: 110-450 G/MT2 (AVERAGE 250 G/MT2) OVERALL LENGTH OF THE MACHINE: 23 METERS PRODUCTION SPEED AVERAGE: 28-38 M/MIN QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-2319 LAMPERTI TRICOMBINED BRUSH TIGERING, LUSTRING AND SHEARING LINE LC/SF, WIDTH 2600mm TO 2680mm, YEAR 1980 DETAILS: MADE: LAMPERTI TYPE: LC/SF YEAR: 1980 ROLLER WIDTH: 2600mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-9125 BIELLA SHRUNK PROCESS DECATIZER YEAR 1997 WIDTH 1800mm BIELLA SHRUNK PROCESS DECATIZER YEAR: 1997 TYPE: VULCANO WIDTH: 1800mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1219 (0101GHBXX12) A HANKS DYEING PLANT COMPOSED OF: (2) LORIS BELLINI HANKS DYEING MACHINES IN PARALLEL (1) LORIS BELLINI HANKS DYEING MACHINE (1) LORIS BELLINI HANKS DYEING MACHINE (1) ALEA HANKS DRYER MACHINES SOLD TOGETHER QUANTITY AVAILABLE: 5 Learn More

REFERENCE NUMBER: A-1189 (1212GHBXX11) A THIES, TYPE TRD SOFT TRD 140/3, YEAR 2002 THIES TYPE: TRD, SOFT TRD 140/3 YEAR: 2002 MAX WORKING PRESSURE: 0.35 MPA MAX TEST PRESSURE: 0.455 MPA TEMPERATURE: 140°C WATER VOLUME OF 1 TUBE: 1100 LITERS (WHOLE MACHINE 3300 LITERS) AT THE MOMENT : CA 120-140 KG FABRICS IN 1 TUBE BY 100-300 G/SQM IT IS POSSIBLE WORK WITH 2 OR 3 TUBES MACHINE WORKS INSPECTION POSSIBLE ANY TIME QUANTITY: 1 EMAIL US FOR PRICE & PICTURES INCLUDE OUR REFERENCE NUMBER Learn More

REFERENCE NUMBER: A-1151 (1212GHBXX11) A TMT AUTOCLAVE DECATIZING PF 1593 MULTIPROGRAM YEAR 1998 AUTOCLAVE DECATIZING MACHINE MANUFACTURER: TMT MODEL: PF 1593 MULTIPROGRAM YEAR: 1998 AUTOCLAVE DIAMETER: 1.500 MM SATIN CLOTH WIDTH: 1.800 MM SATIN CLOTH LENGTH STANDARD: 750-1000 MT. MAXIMUM FABRIC WIDTH: 1.600 MM. POWER INSTALLED: 48 KW POWER USED: 30 KW STEAM PRESSION : 6-11 BAR COMPRESSED AIR PRESSURE: 6-8 BAR N.B. THIS MACHINE IS IN EXCELLENT CONDITION, AND IS RUNNING. QUANTITY AVAILABLE: 1 Learn More

TT-3426 MAGEBA DYEING AND FINISHING RIBBON LINE, WIDTH 620mm, YEAR 2014 BRAND: MAGEBA CONDITION: USED YEAR: 2014 QUANTITY: 1 Learn More

REFERENCE NUMBER: T-3396 BIRCH BROTHERS INSPECTION STATIONS, ROLL WIDTH 84”, CLOTH WIDTH 80”, YEAR 1994 BIRCH BROTHERS INSPECTION STATIONS ROLL WIDTH: 84” CLOTH WIDTH: 80” YEAR 1994 LIGHTED INSPECTION BOARD TRUE METER MEASURING SYSTEM MERROW SEWING MACHINE ON RAILS ASSISTED DOFF FUNCTION AND CONNECTING CONVEYOR SYSTEM QUANTITY: 4 Learn More