Search results for: 'a-2'

C-2487 VOLLENWEIDER BLADE SHEARING MACHINE SUPER DUPLO PMD-V, YEAR 1996

BLADE SHEARING MACHINE VOLLENWEIDER
TYPE SUPER DUPLO PMD-V
YEAR 1996 M 2 AB, 2 KNIVES
ERHARDT & LEIMER SPREADER IN THE INLET, BRUSHING, IN THE DISCHARGE BATCHING

QUANTITY: 1

P-3527 KMT CONTICRASH CRUSHING MACHINE YEAR 2003 WIDTH 3500mm

KMT
MODEL: CONTICRASH
CRUSHING MACHINE
YEAR: 2003
MACHINE TO CRUSH FABRICS IN CONTINUOUS WITH WORKING WIDTH UP TO 3500mm, PARTICULARLY SUITABLE FOR WOVEN FABRICS.
IT IS SUPPLIED WITH UNWINDER AT TOWING CYLINDERS WITH VARIABLE SPEED, THERMOFIXING STEAM CHAMBER AND FABRIC EXTRACTION BELT WITH SEVERAL COOLING FANS.

QUANTITY: 1

P-4818 STORK ROTARY PRINTING YEAR 1989 WIDTH 1800mm 14 COLORS 3 CHAMBERS

STORK
TYPE: RD IV-16/14
ROTARY PRINTING
YEAR: 1989
WORKING WIDTH: 1800mm

QUANTITY: 1

P-4874 BRUCKNER OPTI-SHRINK COMREHENSSIVE SHRINKING RANGE (SANFORIZER) YEAR 2003 WIDTH 2000mm

BRUCKNER
TYPE: OPTI-SHRINK
COMPREHENSSIVE SHRINKING RANGE (SANFORIZER)
YEAR: 2003
WORKING WIDTH: 2000mm

QUANTITY: 1

R-1708 MCS JET DYEING MACHINE, CAPACITY 720 TO 800 KGS, YEAR 2001

MCS JET DYEING MACHINE
YEAR: 2001
TYPE: MFJ KHT
4 TUBE HT 140C
CAPACITY: 720 TO 800 KGS
TERMOELETTRONICA PLC PROGRAMMABLE CONTROLLER
TYPE: CT-301

QUANTITY: 1

REFERENCE NUMBER: M-4167

KUSTER BLEACHING RANGE 3200mm YEAR 1992

KUSTERS BLEACHING RANGE

YEAR 1992 BUT UPGRADED IN YEAR 2011 WITH NEW INVERTERS, ELECTRONIC ETC

ROLLER WIDTH: 3400mm

FABRIC WIDTH: 3200mm

3 PRE WASHING COMPARTMENTS

IMPREGNATIONS PADDER

REACTION CHAMBER WITH ROLLER BED AND TIGHT STRAND, CAPACITY 2000 METERS

4 x WASHING COMPARTMENTS

EXIT BATCHER

380 V 50HZ

INVERTER CONTROL

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

QUANTITY: 1

REFERENCE NUMBER: M-3169

PAD DYE STATION (PAD BATCH)-2600mm

BRAND: BENNINGER-ZELL

MODEL BICOFLEX 2600

WITH LCD DISPLAY

BIG ROLL (“A” FRAME UNWINDER) AND WINDER, 1800mm DIAMETER

PAD DYE STATION

REFERENCE NUMBER: C-3886

BRAZZOLI HT JET DYEING

MODEL: HTFM S LUX SATURNO

YEAR: 2000

QUANTITY: 1

REFERENCE NUMBER: C-3885

BRAZZOLI HT JET DYEING

MODEL: HTFM S LUX SATURNO

YEAR: 2000

QUANTITY: 1